Contents
Product Registration......................................................………..............................….........2
Important Product Safety Instructions ................................................…............................3
Antenna Installation Instructions ........................................ .............................……………4
Cleaning the LCD ..............................................................................................….............4
Getting Started
Package Contents ........................................................................................................…..5
Front View of the Product....................................................................................………….6
Card Reader...................................................................................................................….7
Rear View of the Product ...................................................................................................8
Remote Control ......................................................................................................…........9
Notes on the Remote
Control.............................................................................…...........…………………………11
Teletext…………………………………………………………………………………………….11
Installation .........................................................................................................................12
OSD Functions
Source Input: TV/AV/S-video ............................................….............................................15
Appendix
Specifications ....................................................................................................................25
Troubleshooting......................................................................................................…........27
Customer Support ..................................................................................................…....…28
Limited Warranty ......................................................…...........................................………29
Safety Guidelines ............................................................................................……………30
ViewSonic N3200w 1
Copyright © ViewSonic Corporation, 2004. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft
Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC
are trademarks of VESA.
ENERGY STAR© is a registered trademark of the U.S. Environmental Protection Agency (EPA).
As an ENERGY STAR© partner, ViewSonic Corporation has determined that this product meets
the ENERGY STAR© guidelines for energy efficiency.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from furnishing this
material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic©
Wizard CDROM also provides an opportunity for you to print the registration form, which you may
mail or fax to ViewSonic.
FOR YOUR RECORDS
Product Name: ViewSonic N3200w
Model Number: VS10323-1
Document Number: A-CD-N3200-1
Serial Number: _____________________
Purchase Date: ______________________
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this product
properly at the end of its useful life. Your local waste disposal company may provide information
about proper disposal.
Important Product Safety Instructions
Attention:
Follow and obey all warnings and instructions marked on your product. For your safety, please
read all the safety and operating instructions before you operate this product. Keep this user guide
for future reference.
Installation
1 Grounding or Polarization
Your product may be equipped with a polarized alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete outlet. Do not alter the
safety purpose of the polarized plug
2 Overloading
Do not overload well outlets, extension cords, or integral convenience receptacles as this can
result fire or electronic shock.
3 Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them. Pay particular attention to cords near plugs, convenience
receptacles, and the point where they exit from the product.
.
4 Ventilation
Slots and openings on the cabinet is provided for ventilation purposes.
To ensure reliable operation of the product and to protect it from overheating, these openings
must not be blocked or covered.
• Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.
• Do not place the product in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instruction have been adhered to.
5 Other Notices
• Avoid exposing the N3200w to direct sunlight or high temperatures.
• Avoid exposing the N3200w to moisture or high humidity.
• Do not attempt repairs yourself. Your warranty does not cover repairs or attempted repairs by
anyone not authorized by ViewSonic.
• If your N3200w will not be used for a long period of time, unplug and remove the batteries
from the remote control.
6 Precautions
Sit at least two metres from your LCD.
Avoid touching the screen. Skin oils are difficult to remove.
Never remove the rear cover. Your LCD contains high-voltage parts. You may be seriously
injured if you touch them.
• Avoid exposing your LCD to direct sunlight or another heat source. Orient your LCD away
from direct sunlight to reduce glare.
• Always handle your LCD with care when moving it.
• Place your LCD in a well-ventilated area. Do not place anything on your LCD that prevents
heat dissipation.
• Ensure the around the LCD is clean and free of moisture.
• Do not place heavy objects on the LCD, video cable, or power cord.
• If smoke, abnormal noise, or strange odor is present, immediately switch the LCD off and call
your dealer or ViewSonic. It is dangerous to continue using the LCD.
ViewSonic N3200w 3
Antenna Installation Instructions
1 Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product be sure the antenna or cable
system is grounded to avoid voltage surges and built-up static charges. Article 810 of the
National Electrical Code, ANS/NFPA 70, provides information with regard to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit,
connection to grounding electrodes, and requirements for the grounding electrode.
2 Lightning
For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning and power-line surges.
Do not disconnect the antenna or the power cord during a heavy storm as lightning may strike
while you are holding the cable cord, causing serious injury. Turn off your LCD and wait for the
weather to improve.
3 Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits. When installing an outside antenna system, extreme care should
be taken to keep from touching the power lines or circuits as contact with them may be fatal.
Cleaning the LCD
• MAKE SURE THE LCD IS TURNED OFF
• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE
SCREEN OR CASE
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto
a clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1. Use a soft, dry cloth.
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based, mild nonabrasive
detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
ViewSonic does not recommend the use of any ammonia or alcohol-based cleaners on the LCD
screen or case. Some chemical cleaners have been reported to damage the screen and/or LCD
case. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based
cleaners.
Getting Started
Congratulations on your purchase of a ViewSonic LCD TV display. Important! Save the
original box and all packaging material for future shipping needs.
Package Contents
Please confirm that the following accessories are present when you unpack the box:
• LCD TV
• Remote Control (batteries included)
• Power Cord
• Quick Start Guide
• User Guide
• Speakers x 2
• SCART Cable x 1 (For Europe)
• SCART Adapters x 2 (For Asia Pacific)
Front View of the Product
1.SPEAKERS
Audio output.
2.MEMORY CARD READER
Slots to insert flash memory cards (CF, SD/MMC, MS, SMC).
3.
HEADPHONE
Used for connecting headphones.
4. SOURCES
Switch between display input sources.
5. MENU
Display menu screen.
HEADPHONE MENU VOL CH POWER SOURCES
6. VOL +/–
CF
Used for changing the volume.
SD/MMC SM MS
7. CH ▼ /▲
4
Changes the channel.
8. POWER
Turns the TV on and off. A green light indicates that TV is on and red that it is off.
5 8 7 6
1
ViewSonic N3200w 6
Card Reader
NOTES:
• Insert the memory card according to the arrow on the card’s label.
• The device can only display digital graphic files, which are stored on the memory card
(ie. JPEG files). The device supports all JPEG formats as created by digital cameras, but
does not support other graphic formats.
• You can insert CF, SD, MMC, SMC, and MS cards. Other cards are not supported.
• Two cards can not be used at the same time.
ViewSonic N3200w 7
Rear View of the Product
R
ANT
L1
1.SCART1-IN
Connects to the SCART output of your A/V device.
2.SCART2-IN
Connects to the SCART output of your A/V device.
3.DVI IN
Connects to the DVI output of your PC or portable computer.
4.PC AUDIO IN
Supports DVI input and VGA input.
5. VGA IN
Connects to a computer’s VGA out jack, enabling you to use the TV as a
computer monitor.
6.COMPONENT IN
Connects to the audio and component video output jacks of your A/V device.
7.S IN
Connect an S-Video cable to an external audio/video device such as a VCR,
DVD, or a video game machine.
8.AV IN
Connect a composite video (yellow) cable to an external audio/video device such
as a VCR, DVD, or video game machine.
9.AV OUT
Used for connecting to an external stereo system.
10.ANT
Connect to an antenna or cable service.
2
3 8
ViewSonic N3200w 8
Remote Control
1. POWER
Turns power on or to standby mode.
2. S-VIDEO
Switches to S-Video input.
3. SLEEP
Sets the time to turn off the unit.
4. CH▼/ ▲
Decreases ▼ or increases ▲ the channel number.
5. VOL –/+
Increases (+) or decreases (–) the volume.
6.
Switches to the previously viewed channel.
7. TELETEXT HOT KEYS
Select groups of pages in teletext mode.
8. INDEX
Displays a list and information about the teletext pages.
ViewSonic N3200w 9
9. SUB PAGE
Displays the teletext sub page.
10. ZOOM
Zoom enlarges the teletext page; Hold freezes the current teletext page on the screen.
11. VIDEO MUTE
Turns off the video display. The TV screen turns blank.
12. ARROW KEYS
Press the up, down, left, right arrow keys to scroll through the OSD menu options.
13. MENU
Displays the OSD menu. Press repeatedly to view the different menu pages or exit the
OSD menu.
14. AUDIO AI
Adjusts the audio volume automatically according to the audio level of the channel or
Video programme.
15. WIDE
Switches the display mode between various wide modes. (Mode 1, Mode 2, Mode 3,
Mode 4, 4:3, FULL)
16. PC/DVI
Select the VGA or DVI mode as the video display source.
17. PREVIEW/FULL
Switches between thumbnail and full screen mode when viewing pictures from the flash
memory card.
18. CARD PLAY
Starts playback of an audio or video file from the flash memory card.
19. POSITION
Changes the PIP position (four positions)
20. SWAP
Toggles between the main screen and the sub screen.
21. SUB SOURCE
Selects the sub source for PIP and POP modes.
22. PIP/POP
Toggles between PIP and POP modes.
23. AUTO PLAY
Plays back all the images from the flash memory card automatically.
Press again to stop playback.
24. ROTATE
Rotates a picture from the flash memory card by 90º in a clockwise (right) direction.
25. SCART
Selects the SCART1-IN or SCART2-IN inputs as the video source signal.
26. COMPONENT
Selects the COMPONENT IN input as the video source signal.
27. SOUND
Switches between monaural, stereo, and DUAL 1/DUAL 2 audio modes.
This feature enables you to receive audio in a second language or
unrelated audio (e.g. weather information).
28. SURROUND
Switches between surround sound modes: Surround 1,Surround 2, Surround 3, OFF
29. PAGE ▲/ ▼
Increases or decreases the page number in teletext mode.
30. TELETEXT
Starts teletext mode.
ViewSonic N3200w 10
31. - /- -
Press to type in a channel number up to 99.
32. NUMBER KEYS
Press the number keys to enter channel numbers.
33. TV
Switches the source to TV mode.
34. AV
Switches the source to AV (Composite) mode.
35. DISPLAY
Press repeatedly to display current time, channel number, or video input signal.
36. MUTE
Disables the audio output.
Notes
• The remote control’s effective range is 5 meters from the LCD screen at an angle of up to
±30°.
• Direct light may affect the remote controls effective range.
• Avoid subjecting the remote control to shocks or vibrations.
• Avoid placing the remote control in humid and hot environments such as direct sunlight.
• Remove the batteries when not using the remote control for long periods.
ViewSonic N3200w 11
Installation
Attaching the Speaker
Follow these steps to attach the speakers.
1 Attach one part A and a speaker to one side of the LCD TV with screws as shown in the
illustration.
2 Secure one part B to part A with screws as shown.
3 Repeat these steps to attach the second speaker.
Attaching the AV Tuner Box
The AV Tuner Box generally has pre-installed on the LCD TV. Please follow these steps for
installation otherwise.
1 Slide part A upwards, then remove.
2 Remove the screws from part B and remove the part.
3 Attach part C using screws. Part C and the screws are in the accessory pack. Note the
shape of the screws.
4 Replace part A by sliding A’s tabs into the slots
.
ViewSonic N3200w 12
Remote Control Battery Installation
Follow the steps below to insert the batteries.
1 Open the remote control’s rear battery compartment cover.
2 Insert two AAA batteries. Ensure that the positive and negative ends match as indicated
on the bottom of the battery compartment.
3 Replace the battery compartment cover
.
CAUTION
• Only use the specified AAA batteries.
• Do not mix new and old batteries. This may result in
cracking or leakage, which may pose a fire risk or lead
to personal injury.
• Insert batteries according to the (+) and (-) markings.
Inserting the batteries incorrectly may result in cracking
or leakage, which may pose a fire risk or lead to personal
injury.
• Dispose of batteries in accordance with local laws and
regulations.
• Keep batteries away from children and pets.
• If the remote control will not be used for an extended
period of time, remove the batteries.
ViewSonic N3200w 13
Cable Connections
Attach video and audio cables according to the connections on your external devices such
as DVDs, VCR’s, stereo systems.
Power Cable Connection
1 Connect the power cable to a wall socket.
2 Connect the other end to the socket on the back
of the LCD TV
Turning the TV (Power) On
1 Press the power button. The power light will turn
from red to green and the screen will appear
after 5 seconds.
2 Press the power button again to turn it off.
ViewSonic N3200w 14
OSD Functions
All the functions for the LCD TV are controlled either by the remote control or the control
buttons on the front control panel at bottom of the TV. See “Front View of the Product” on
page 6.
Press the MENU button on the remote control or the front control panel to display the OSD
main menu.
Press the MENU button to select the OSD menu you want.
Press the ◄ / ► buttons to select an OSD menu item.
Press the ▼ button and display the "hand" signal on a sub OSD menu to adjust each adjustment
in sub OSD menu.
Press the VOL +/- or the right/left buttons to change the value of the selected menu item.
Press the MENU button to exit the OSD.
ViewSonic N3200w 15
Source Input: TV/AV/S-Video/SCART
Image Adjustment
Function Name Explanation
BRIGHTNESS Brightness adjustment.
Contrast Contrast adjustment.
Color Color adjustment.
Tint Tint adjustment.
Sharpness Sharpness adjustment.
Video Mode Select TV image display:
Preset: Factory default settings.
Soft: Picture settings result in softer colors and less sharp images.
User: User defined settings.
ViewSonic N3200w 16
Audio Adjustment
The Audio menu enables you to configure the volume, treble, and bass of the audio output.
Use the slider bars to adjust these settings.
Function Name Explanation
Volume Adjusts the overall volume of the speakers.
Treble Adjust Treble Level.
Bass Adjust Bass Level.
Balance Adjust left and right speaker balance.
Audio Mode Stores Audio settings.
Soft: audio settings that result in softer audio.
User: user defined settings.
Preset: factory default settings
Speaker Turns the speakers off (same as mute).
SOUND Selects the audio mode from STEREO, DUAL 1/2, or MONO.
ViewSonic N3200w 17
Settings Menu
ViewSonic N3200w 18
Screen Setting
Function Name Explanation
PIP Enables and disables PIP (Picture-in-Picture) mode.
PIP Position Moves the mini-screen to one of the screen's four corners.
Source Switch between using TV/SCART1&2/AV/S mode and YPbPr/RGB/DVI
mode for the main screen.
POP Enables and disables POP (Picture-on-Picture) mode.
Swap Swaps the input sources between main and sub screens display. i.e. When
in the POP mode, only the subtitles and audio input are swapped.
Screen Mode Enables you to select a screen mode.
ViewSonic N3200w 19
TV settings
Function Name Explanation
Program
Fine Tune
Manual Scan
Skip
Name
Save
Tuner System
Indicated the program/channel number when it scanned.
Display the selected frequency and change the frequency for the channel.
Scan the available channels by pressing － /◄ or ＋ / ►.
Enable to delete the current channel
To edit the name of scanned channel/program.
Save the setting of PR EDIT. Note: If all setting without actives "Save", then
changes in PR EDIT setting will back to the default setting.
To display the TV standard of local broadcasting system.
ViewSonic N3200w 20
ViewSonic N3200w 21
Color settings
Function Name Explanation
Red Adjusts the red color
Green Adjusts the green color
Blue Adjusts the blue color
Color Temperature Adjust the color temperature from Cool, Warm, Nature, and User.
ViewSonic N3200w 22
Source Input: PC
Function Name Explanation
BRIGHTNESS Brightness adjustment.
CONTRAST Contrast adjustment.
SHARPNESS Sharpness adjustment.
H POSITION Adjust horizontal position on the image.
V POSITION Adjust vertical position on the image.
PHASE Adjust the phase of screen to obtain the best output.
CLOCK Adjust screen’s horizontal size.
AUTO Automatically adjusts the screen according to the input signal source.
ViewSonic N3200w 23
Source Input: DVI-D
Function Name Explanation
BRIGHTNESS Adjust the white level of the screen.
CONTRAST Adjust the black level of the screen.
SHARPNESS Adjust the sharpness level of the screen.
H POSITION Adjust the screen’s horizontal position.
V POSITION Adjust the screen’s vertical position.
AUTO Auto adjusts, the phase, clock, and position of the image.
ViewSonic N3200w 24
Appendix
V
)
A
r
A
A
)
A
A
A
Specifications
Panel
Type
32” (full 32” viewable diagonal area), TFT (Thin Film Transistor),
ctive Matrix WXGA LCD, 1280RGB * 768 vertical stripe
iewing angles
Input signal
Compatibility
Resolution
Color
Video
udio
PC
Macintosh1
Supported
nti-reflective coating + Anti-glare coating
170° (H) / 170° (V
RGB Analog * 1 (75 ohms, 0.7 Vp-p)
H/V separated (TTL) for PC
fh: 30-70 KHz, fv: 50-85 Hz
TV system antenna
Composite Video * 1
S-Video * 1
Component Video * 1 (YCbCr/YPbPr)
DVI-D * 1
SCART *2
Mini-stereo * 1
Up to 1280 x 768 Non-interlaced
Power Macintosh up to 1024 x 768
1280 x 768 @ 60 Hz
1024 x 768 @ 60/70/75 Hz
832 x 624 @ 75 Hz
800 x 600 @ 56/60/70/75 Hz
640 x 480 @ 60/70/75 Hz
720 x 400 @ 70 Hz
Speaker Output
Powe
Operating
conditions
Storage
conditions
Dimensions
Weight
Regulations
Power saving modes
12 W
Voltage 100-240 VAC, 50/60 Hz (auto switch), 190W
Temperature
Humidity
ltitude
Temperature
Humidity
ltitude
Physical 1054 mm (W) x 635 mm (H) x 220 mm (D)
On
ctive Off
0°C to 40°C (32°F to 104°F)
10% to 90% (no condensation)
To 3000 feet
-20°C to 60°C (-4°F to 140°F)
10% to 90% (no condensation)
To 12,000 feet
41.5” (W) x 25” (H) x 8.6 “(D)
22.5 kg (49.6 lb.
UL, FCC, ICES-003, CE, PSB, C-tick
190 W (Green LED)
<3 W (Orange LED)
Preset Timing Mode (Pre-adjusted to VESA 1280 x 768 at 60 Hz)
Warning: Do not set the graphics card in you computer to exceed these refresh rates. Doing so may
result in permanent damage to the LCD.
Note: Product specifications are subject to change without notice.
ViewSonic N3200w 25
Troubleshooting
No power
• Make sure the LCD is properly connected. (see also pages 12-14)
• Make sure the AC power cord is properly connected. (see also page 14)
• Make sure the AC power is ON, DC power button is ON (Green LED).
• Plug another electrical device (like a radio) to the power outlet to verify that the outlet is
supplying the proper voltage.
Poor or no picture
• The TV station may be experiencing problems. Try another channel.
• The Cable TV signal may be scrambled or encoded. Please contact your local cable operator.
• Make sure that connection to other components are correct. (see also pages 12-14)
• Make sure that setup has been done correctly after connections. (see also pages 15-21)
• Make sure the correct input is selected and the input signal is compatible. (see also page 20)
Strange color, light color, or color misalignment
• Ensure that the video cable is securely connected.
• The picture may appear dim in a brightly lit room.
• Adjust brightness and contrast.
• Check the input signal setting.
No sound
• Check your audio connections
• The MUTE button may have been pressed, try pressing this button again.
• Check your audio settings, your TV audio may be set to minimum.
• Press the Volume + (Up) button on the remote control.
Remote control unit does not operate
• Make sure batteries are inserted correctly. (see also page 13)
• Batteries could be weak or dead. Replace batteries.
• Is a fluorescent light illuminated near the remote control sensor?
• The path of the remote control beam may be blocked. Make sure the path is clear and that the
remote control is aimed at the remote control sensor on the TV.
• Press only one button at a time and it is the correct one for the operation you want to perform.
Unit cannot be operated
• External influences such as lightning or static electricity may cause improper operation. In this
case, operate the unit after first turning on the power of the LCD and the AVC System, or unplug
the AC cord for 1 to 2 minutes, then replug again.
Power is cut off suddenly
• Is the sleep timer set? (see also page 18)
• The internal temperature of the unit has increased. Remove any objects blocking the vent or
clean as necessary.
No CATV reception (or no reception above CH13)
• Is the AIR/CABLE option set correctly? Please set the AIR/CABLE option to CABLE (see also
pages 19).
• CATV is connected improperly or not connected; please check all the CATV connections.
• The cable TV service is interrupted; please contact your cable operator.
Picture is cut off/with sidebar screen.
• Is the image positioned correctly?
• Are screen mode adjustments such as picture size set correctly?
ViewSonic N3200w 26
ViewSonic N3200w 27
Limited Warranty
VIEWSONIC LCD TV DISPLAY
What the warranty covers:
ViewSonic® warrants its products to be free from defects in material and workmanship during the warranty
period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic
will, at its sole option, repair or replace the product with a like product. Replacement product or parts may
include remanufactured or refurbished parts or components.
How long the warranty is effective:
Viewsonic N3200w LCD TV is warranted for one (1) year for all parts including the light source and one (1)
year for all labor from the date of the first consumer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product such as electrical power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Removal, installation, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support. You will
need to provide your product’s serial number.
2. To obtain service under warranty, you will be required to provide (a) the original dated sales slip, (b) your
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center
or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, WHICH EXTEND BEYOND THE
DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
Exclusion of damages:
VIEWSONIC’S LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE PRODUCT.
VIEWSONIC SHALL NOT BE LIABLE FOR:
1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES BASED
UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF PROFITS,
LOSS OF BUSINESS OPPORTUNITIES, LOSS OF GOODWILL, INTERFERENCE WITH BUSINESS
RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.
Effect of state law:
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Some states do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or
consequential damages, so the above limitations and exclusions may not apply to you.
Sales outside the USA and Canada:
For warranty information and service on ViewSonic products sold outside of the USA and Canada, contact
ViewSonic or your local ViewSonic dealer.
ViewSonic LCD Warranty (V3.0) Release Date: 01-29-2002
ViewSonic N3200w 28
Safety Guidelines
y
Warning: This device must be operated with the original power supply, part number: 12VDC
LSE9901B1250, 12VDC UP06031120.
CAUTION: The socket-outlet should be installed near the equipment and should be accessible.
CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that
is certified for the individual country. Some examples are listed below:
USA................UL
Canada ..........CSA
German
........VDE
Switzerland .…SEV
Britain..............BASE/BS
Japan...........…Electric Appliance Control Act
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord set for this unit is enclosed and has been selected according to the country of
destination and must be used to prevent electric shock. Use the following guidelines if it is
necessary to replace the original cord set or if the cord set is not enclosed.
The female receptacle of the cord set must meed IEC-60320 requirements and may look like
figure A1 below:
FCC Warning
To assure continued FCC compliance, the user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be
used, use only a shielded BNC(5) cable. Also, any unauthorized changes or modifications not
expressly approved by the party responsible for compliance could void the user’s authority to
operate this device.
CE Conformity for Europe – The device complies with the requirements of the EEC directive
89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic
compatibility”, and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety”.
ViewSonic N3200w 29
Loading...