ViewSonic N2635w-1M, VS11769-1M Service Manual

Service Manual

ViewSonic N2635w-1M

Model No. VS11769-1M

26” LCD TV

(N2635w-1M_SM Rev. 1a Jul. 2007)

ViewSonic® 381 Brea Canyon Road, Walnut, California 91789 USA - [phone]

Copyright

Copyright © 200

7 by ViewSonic Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of ViewSonic Corporation.

Disclaimer

ViewSonic makes no representations or warr anties, either expressed or implied, with respect to the contents
hereof and specifically disclaims any warranty of merchantability or fitness for any particular purpose. Further,
ViewSonic reserves the right to revise this publication and to make changes from time to time in the contents
hereof without obligation of ViewSonic to notify any person of such revision or changes.

Trademarks

Optiquest is a registered trademark of ViewSonic Corporation.
ViewSonic is a registered trademark of ViewSonic Corporation.

Revision History

Revision SM Editing Date ECR Number Description of Changes Editor

1a 07/23/07 Initial Release Sophia Kao

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

i

All other trademarks used within this document are the property of their respective owners.

The lamp in this product contains mercury. Please dispose of in accordance with local, state or federal laws.

Product disposal at end of product life

TABLE OF CONTENTS

1. Precautions and Safety Notices.................................................................1

3. Front Panel Function Control Description................................................ 9

4. Circuit Description.......................................................................................23

5. Adjustment Procedure................................................................................27

6. Trouble Shooting Flow Chart................................................................ .....56

7. Block Diagram.............................................................................................60

8. Schematic Diagrams....................................................................................61

9. PCB Layout Diagrams.................................................................................74

10. Exploded View And Exploded Parts List..................................................82

11. Recommend Spare Parts List...................................................................85

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

ii

2. Specification.................................................................................................3

1. Precautions and Safety Notices

1. Appropriate Operation

(1) Turn off the product before cleaning.
(2) Use only a dry soft cloth when cleaning the LCD panel surface.
(3) Use a soft cloth soaked with mild detergent to clean the display housing.
(4) Disconnect the power plug from AC outlet if the product is not used for a long period of

time.

(5) If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display

off.
(6) Do not touch the LCD panel surface with sharp or hard objects.
(7) Do not place heavy objects on the LCD display, video cable, or power cord.
(8) Do not use abrasive cleaners, waxes or solvents for your cleaning.
(9) Do not operate the product under the following conditions:

- Extremely hot, cold or humid environment.

- Areas susceptible to excessive dust and dirt.

- Near any appliance generating a strong magnetic field.

- Place in direct sunlight.

2. Caution

No modification of any circuit should be attempted. Service work should only be performed after
you are thoroughly familiar with all of the following safety checks and servicing guidelines.

3. Safety Check

Care should be taken while servicing this LCD display. Because of the high voltage used in the
inverter circuit, the voltage is exposed in such areas as the associated transformer circuits.

4. Power Supply Requirements

The external AC power operating range shall be from 90 to 264Vac

5. LCD Module Handling Precautions

5.1. Handling Precautions

(1) Since front polarizer is easily damaged, pay attention not to scratch it.
(2) Be sure to turn off power supply when inserting or disconnecting from input connector.
(3) Wipe off water drop immediately. Long contact with water may cause discoloration or

spots.
(4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
(5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard

surface.
(6) Since CMOS LSI is used in this module, take care of static electricity and insure human

earth when handling.
(7) Do not open nor modify the Module Assembly.
(8) Do not press the reflector sheet at the back of the module to any directions.
(9) In case if a Module has to be put back into the packing container slot after once it was

taken out from the container, do not press the center of the CCFL Reflector edge.

Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT

Module may be damaged.
(10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor

tilt the Interface Connector of the TFT Module.
(11) After installation of the TFT Module into an enclosure (LCD monitor housing, for

example), do not twist nor bend the TFT Module even momentary. At designing the

enclosure, it should be taken into consideration that no bending/twisting forces are

applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.
(12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please

follow local ordinances or regulations for disposal.
(13) Small amount of materials having no flammability grade is used in the LCD module.

The LCD module should be supplied by power complied with requirements of Limited

Power Source (IEC60950 or UL1950), or be applied exemption.
(14) The LCD module is designed so that the CFL in it is supplied by Limited Current

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

1

Circuit (IEC60950 or UL1950). Do not connect the CFL in Hazardous Voltage Circuit.

5.2. Handling and Placing Methods

Correct Methods: Incorrect Methods:

Only touch the metal frame of the LCD panel or the
front cover of the monitor. Do not touch the surface
of the polarizer.

Surface of the LCD panel is pressed by fingers and

that may cause “Mura”

Take out the monitor with cushions Taking out the monitor by grasping the LCD panel.

That may cause “Mura”

Place the monitor on a clean and soft foam pad. Placing the monitor on foreign objects. That could

scratch the surface of the panel or cause “Mura”

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

2

The top-level assembly for this product shall contain:
a.) Carton Box (Each version has different box that is localized for its region)
b.) One N2635w-M LCDTV:
c.) Wrapped in plastic bag with venting holes and “suffocation warning printing”
d.) A removable plastic On-Screen-Protector
e.) Assembly Mounted in foam (“Snowbox”) and with base assembly installed.
f.) VS insert page on the top site of bezel

g.) One IR Remote Control w/ 2 AAA batteries separately packed.

h.) One ViewSonic Printed Quick Setup Guide A3 sized with Graphical instruction type;
localized per SKU.
i.) One ViewSonic User’s Guide in a 3.5” CD.
Since N2635w-M is intended to be a NA product for ViewSonic, table below further illustrate

Region / SKU -M

Product Name N2635w

Model Number VS11769-1M

AV Module INCLUDED

Model Number for AV Module N/A

Firmware Version V:P01 or Later version

Serial Number QNEyywwannnn

Serial Number for AV Module N/A

UPC Code 766907265316

UPC Code for AV Module N/A

EDID Code 0720
OSD Languages

(Default = BOLD)

English, French, Spanish

TV System NTSC/ATSC

Video Format NTSC

MTS/NICAM MTS

Closed Caption Yes

Parental Control Yes, Default “0000”

Power Cord(s) Black 1.8M

Quick Setup Guide Graphical Instruction

User’s Guide (printed) English(default), French, Spanish

Remote Control English

Numerous components are used for making this product. It is the integrator’s responsibility
to integrate these components into this complete product. It must meet the following
specification. Quality assurance / testing shall be the responsibility of the Integrator.

In addition, all exterior plastic components, screen-printed components, labels, shipping
cartons, protective foam, and printed materials of this product require approval by ViewSonic
prior to mass production. Bill of material, schematics, service manual and assembly
drawings of this product shall also be provided in compliance with ViewSonic Service Manual,
and Vendor Requirements Guide, VSCPCSMVRG1.0.

Finally, mass production of this product shall not begin until ViewSonic has issued a Mass
Production Release, and any engineering changes to this product thereafter shall be approved
in writing by ViewSonic.

This product specification is divided into the following categories:
LCD panel of this product shall be provided by “CMO” with a model number of

2. Specification

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

3

V260B1-L01. The following table defines this panel specification. Any changes in panel must
be pre-approved by ViewSonic in written.

Parameter Specification

LCD Type

a-Si TFT Active Matrix Wide Color, Transmissive Mode, Normally

Black
LCD Interface 1-Channel LVDS
Resolution (Native) 1366 x 768 WXGA
Display Area 26” diagonal; 575.769 (H) x 323.712 (V) mm
Pixel Pitch 0.1405 (H) x 0.4215 (V) mm
Viewing Angle H = 160, V = 150 with CR≥10 (Typical)
Contrast Ratio 800:1 (Typical)
Brightness 500 nits (Typical)
Response Time 8 ms, (Typical), g-g
Brightness Uniformity 75% (Min), measured per panel spec.
Chromaticity(CIE1931) White-x:0.280,White-y:0.285 (Standard Mode Only)
Colors 16.2M (6-bits+FRC)
Surface Treatment Hard coating (3H)
Backlight 12 CCFLs (Cold cathode Fluorescent Lamp)
Preset Color Panel Default
Gray Scale 0-255
Rated Life (Backlight) > 50KHrs* (60KHrs Typical)

Front Screen Artifacts

VS Standard:

a.) No Visible Streaking, Sag or Smearing artifacts when driven

by the specified video cards (see 7.1 General Test Equipment)
in the primary mode (VGA & 60 Hz) and after user adjustment

b.) No image drift or lose fine-tune settings due to panel

temperature change.

Panel Acceptance Spec

Refer to the panel acceptance criteria specification.

Note: Intermittent and/or Display Pattern defects which result in

further bright or dark dots will be counted individually against the

above specification.

Note: Also refer to the panel defect acceptance specification.
Panel performance characteristics “ MUST BE” met in all display modes/inputs at standard
test conditions.

1. RF Tuner

RF tuner of this product shall be provided by “Samsung DTVS205CH201A” for NTSC/ATSC. The
following table defines this tuner specification.

Parameter Specification

RF Input Level 45 ~ 85dBµV

RF Tuning Range

NTSC/ATSC: 55.25 to 801.25 MHz, 2-69 Channels

for Off-Air and 1-125 Channels for CATV
RF Tuner Sensitivity (S/N Ratio at
un-weight)

45 dB (min.)

Channel Bandwidth NTSC/ATSC: 6 MHz Maximum
CVBS Characteristics:
Video Amplitude Signal
DC Level Sync Pulse

0.7(min.)–1.1(max.) V

Typical. 0.35 V

Audio Characteristics:
AF Output Level Measured via LP 20 kHz
Filter, RMS Decoder,
75us De-emphasis
THD
S/N

Typical. 0.35Vrms

10% (max.)

44 dB (min.)
Compatible system TUNER NTSC/ATSC

Compatible system AV NTSC M

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

4

2. Video

Built-in A/D converter shall provide analog to digital converter for this product.

Input Parameter Specification

CVBS Characteristics:
Video Amplitude Signal
DC Level Sync Pulse

0.7(min.) – 1.1(max.) V
Typical. 0.3 V

S-Video Characteristics:
Video Amplitude Signal

Y : 1.0Vp-p W / Neg. Sync (IN 75 Ω )

C : 0.285Vp-p (IN 75 Ω )
Y, Pb, Pr Characteristics:
Video Amplitude Signal

Y:1.0Vp-p (IN 75 Ω)

Pb:0.7 Vp-p(IN 75 Ω),Pr:0.7 Vp-p (IN 75 Ω)
Video Bandwidth NTSC: 6 MHz Maximum

HDMI Characteristics Panel Link T.M.D.S HDMI-1.1

RGB Characteristics:
Signal Type
Sync Type
Input Signal Rating
Sync Level:
Frequency Range
Pixel Color
DDC Compliance
EDID Data Table

Analog VGA

TTL, Separate Sync, with 4.7KΩ pull-down resistors

1250mV Max without damage to the product, 0-700 mV Full Range

2.5-5.25 V

Horizontal: 30-82K Hz, Vertical: 50-75 Hz

16.7 M

DDC2B Compliant, Rev 1.3

Refer to Appendix

3. Audio

Audio amp of this product shall be provided by “Yamaha” with a Model Number of YDA138 .
“MTK” MT5730 for N2635w-M shall be used as sound processor. In addition, a pair of speakers
shall be integrated within this product. The audio signals of this product shall comply with the
specification listed in the following table.

Parameter Specification

Tuner Input Base band Input

Power Output Max
Rating

10W at 10 % T.H.D

Distortion

10W at 10% T.H.D Distortion

Speaker Impedance main spk :6 Ω main spk :6 Ω

Line In

Per Tuner Spec

158 mV rms (Typ)

1.6 V rms (Max)

Impedance: 600 ohms

Line Out

158 m Vrms +/- 10%

@1K Hz tone (with +/-25 Hz

deviation at input, volume

with non-attenuation and

loading with 47k Ohms)

158 m Vrms +/- 10%

@1K Hz tone (with +/-25 Hz
deviation at input, volume with
non-attenuation and loading with 47k
Ohms)

Flatness of Amplitude
Response

+/- 3 db (at 1KHz @1W) +/- 3 db (at 1KHz @1W)

Total Harmonic Distortion
(Po=0.1 to 1 W, f=1KHz)

<2% <2%

Signal to Noise:

30 dB (40Hz to 15KHz) 40 dB (400Hz to 20 kHz)

4. Electrical

The following table defines the electrical specification of this product.

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

5

ELECTRICAL SPECIFICATION

1 Power Input Voltage Range 100-240VAC +/- 10% Wide Range

2 Input Frequency Range 47-63 Hz

3 Input Current 3.0A @ 115VAC // 1.5A @ 230VAC

4 Power Supply Inrush

Max in < 150A (with fully loaded power supply) at
230Vac
Shall not result in permanent failure of power supply
(including blown fuse)

5 Power Consumption: 105 W (Normal), 135W (Max) // Stand by: < 3 W

6 Interference with RF and Video

There shall be no visible interference between power
supply, RF and video signals. This applies to all
available RF channels and video modes.

7 Electromagnetic Compatibility

This product shall adhere to the compatibility and
immunity specifications in FCC.

8

Power Supply Transient Immunity
(Supply Transients and Outage)

Able to withstand an ANSI / IEEE C62.41 – 1980 2000V
ring wave with no damage.

9 Surge Immunity Test

Able to withstand 1.25X nominal Line Voltage for one
cycle with no damage.

10

Power Supply Missing Cycle
Immunity

Function properly without reset or visible screen artifact
when 1/3 cycle of AC Power is randomly missing.

11 Power Supply Acoustics

The Power Supply shall not produce audible noise that
would be detectable by the user (Excluding Power Supply
Fan).
“Audible” shall be defined in accordance with ISO 7779
(DIN EN27779:1991).
Power Switch noise shall be Excluded.

12 Efficiency >= 80% @ full load, nominal line

13 Leakage Current <0.5mA @ 240VAC

14 Power Saving(DPMS) N/A

15 Recovery Time < 3 sec.

16 Power Factor Correction Compliant with EN61000-3-2

5. Firmware & OSD

The product firmware of VS11769-1M shall have a firmware version of V:P01 or later version.
Any changes/revisions afterward shall also be pre-approved by ViewSonic in written. For
VS11769-1M, its firmware shall have a built-in frequency table for NTSC/ATSC off-air TV/CATV,
Closed-Caption, and with MTS implementation.

All audio/video and other output adjustments shall be performed by using an On Screen Display
(OSD) via a Remote Control Unit (RCU) adjustment. The following tables list the OSD
functions supported by VS11769-1M.

OSD Table:

OSD

Picture Mode Picture effect selections on Cinema, Sport, Vivid, Hi-bright, and User
Brightness Adjust the Black levels
Contrast Adjust the White levels
Color Adjust the Color levels
Tint Adjust the Tint levels
Sharpness Adjust the Sharpness levels
Color Temperature Selections on Normal, Warm, user, Cold
Balance Adjust the Speak output levels
Bass Adjust the Low Frequency levels
Treble Adjust the Hi Frequency levels

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

6

Surround Surround sound effect On or Off

Reverb

Reverb Sound effect selections on Concert, Living Room, Hall,

Bathroom, Cave, Arena, Church, and Off the effect

Equalizer

Equalizer effect selections on Rock, POP, Live, Dance, Techno,

Classic, Soft, and Off the sound effect.

SPDIF Type SPDIF output selections on PCM, Dolby Digital and Off the output.
Auto Volume Control Auto set the same sound level between different TV channels.
Tuner Mode Selections TV sources to Air or Cable
Auto Scan TV program Auto Search
Channel Skip TV channel Add or Delete
MTS TV Audio Selection on Mono, Stereo and Sap sound
Audio Language Audio Language Selections on English, Spanish, and French
OSD Language OSD Menu Language Selections on English, Spanish, and French
Blue Mute Blue Display On or Off when no input signal
Time setup Set Time Zone, Time, and Sleep Timer

Close Caption

Displaying captions during closed caption source and closed caption

mode select

Memory recall Set user settings to factory preset value
Parental TV program controlled by parents via password setting

RCU Key function

Power Soft power on or off
Picture Picture effect selections on Cinema, Sport, Vivid, Hi-bright, and User

Sound

Reverb Sound effect selections on Concert, Living Room, Hall,

Bathroom, Cave, Arena, Church, and Off the effect

TV/CATV Swap Air TV and Cable TV. Swap to TV when in other source
MTS Selection on Mono, Stereo and Sap sound
Sleep Set TV Power off time
Info Display current source input information
Mute Mute On or Off sound
0 ~ 9, - Direct channel key number
Return Return to last channel
Guide Electric program guide on Digital TV
CH up/down Adjust channel up or channel down
Volume Adjust the Volume levels
Up/Down/Left/Right
arrows

Select or adjust the function of OSD

Fav.ch Switch to favorite channel
Fav.A/D Add or Del favorite channel
Menu Turn On or Off OSD main menu or exit current menu
Input Selections Input Source

Enter Confirm the selection

6. Remote Control Unit (RCU)

An IR remote control unit shall accompany this product along with battery. In addition, this
remote control unit shall have an operational distance of 5 meters and an operational angle of 15
degrees for both horizontal and vertical. Besides the key-code and protocol has fully conformed to
VS standard.

Parameter Specification

Type IR; Made by Bontech Electronics Co., Ltd.

Range

Off axis ± 15° ≥ 5M
On axis: ≥ 7M

Life Testing (Buttons)

100,000 cycle operations at a rate of 20~30 cycle / minute without load
(with battery)

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

7

Color

Painting Color - PANTONE 427C (Black for front bezel & back cover)
Power Key - PANTONE 032C (RED)
Key Pads – PANTONE 11C & PANTONE 5C(Cool Gray)
Texts Printed on Front Cover and Key Pads - PANTONE 427C,
PANTONE 433C(Black)

Protocol VS key-code & protocol.

7. Mechanical

The following table defines the mechanical specifications of this product for both chassis and
cabinet.

Parameter Specification

Dimension

W/O stand

659.9 x 559 x 210 mm

659.9 x 493.5 x 101 mm

Net Weight 13.8 kg
Gross Weight TBA kg
Net weight *without* stand TBA kg
Chassis Plastic Material ABS (ABS HB / ABS VO / PC+ABS/HIPS+MICA)
External Plastic Chassis Components Plastic Chassis, Cover, Stand (Metal + Plastic),Len and

Button
Exterior Chassis Color/Texture/Details Refer to Figure 1 – Product ID
Chassis Component’s Color Difference Refer to Figure 1A – Color Guide
Chassis Color Drift Due to UV-Light The color drift due to UL-Light shall be less than 10 “Delta

E” in the 1976 CIE L*a*b color space. Testing shall be

performed according to the requirements of ASTM Test

Method D4459-93.
Molded Plastic Workmanship shall be inspected according to ViewSonic

Molded Plastic Parts Specification,

VSCMPPSPEC001V1.2.
Screen Printed Parts, Bird Logo Recess Artwork shall be provided and confirmed by ViewSonic.
Rear Label A label identifying the product name, model/serial number

and FCC ID/Logo shall be placed into the rear label recess

located on the rear panel of the chassis.
Wall Mount 200/100 mm x 100mm VESA high hole (n=4), M4 X

10mm , pitch =1.0mm screw mounting kit not included.
Sample Sample of textured color chips, plastic material

specification, and Material Safety Data Sheets shall be

submitted to ViewSonic prior to Mass Production Release.

In addition, all exterior surfaces shall have uniform texture/color. The maximum acceptable gap
between the buckets to bezel plastic pieces shall be within 1 mm. The maximum acceptable gap
between LCD panel and bezel shall be within 1.5 mm.

8. Environmental

The following table defines the operational/storage conditions of the product.

Operating Temperature

0°C to +40°C
Humidity 10% ~ 65% non-condensing
Altitude 0 meter to +3000 meters above sea level
Storage Temperature

-20°C to +60°C
Humidity 0 ~ 90% non-condensing
Altitude 0 meter to 12,000 meters above sea level

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

8

3. Front Panel Function Control Description

Front View of the Product

ENGLISH

Note:

1. Press VOL+ and MENU buttons at the same time to lock power button, and press
VOL+ and MENU buttons again to unlock it.

2. Press VOL- and VOL+ buttons at the same time to lock OSD menu, and press
VOL- and VOL+ buttons again to unlock it.

Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.

(Only for DTV input in this model.)

Volume Down

Decrease sound volume or adjust a highlighted control while in OSD menu.

Volume Up

Increase sound volume or adjust a highlighted control while in OSD menu.

Menu

T

urn OSD menu ON/OFF.

CH Down

Channel down when source is

TV, or select a control while in OSD menu.

CH Up

Channel up when source is

TV, or select a control while in OSD menu.

ENTER

T

o highlight a control in OSD menu.

Power ON/OFF button
Remote Control Receiver
Power LED Indicator

1

3

2

4

5

6

7
8
9

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

9

Rear View of the Product

SPDIF Optical output

Connect this port to the SPDIF input of A/V device.

Cable/Air input jack

Connect this port to RF/ CATV/ Digital cable.

Audio output

Connect this port to your A/V device with audio in (RCA) connectors or to audio amplifier.

AV/ S-Video signal Audio input (left/right)

Connect this port to the RCA audio output connectors of your A/V device.

YPbPr signal Audio input (left/right)

Connect this port to the RCA audio output connectors of your A/V device.

Composite Video input

Connect this port to the composite video output of A/V device.

S-Video input

Connect this port to the S-Video output of A/V device.

YPbPr signal input

Connect this port to the YPbPr output of A/V device.

PC Audio input

Connect this port to PC line out jack.

VGA signal input

Connect this port to the VGA output of your PC.

Headphone Jack

Connect this port to your headphone.

HDMI Input Terminal

Connect this port to the HDMI output of A/V device.

Power (AC input)

Using power cord provided, connect to a power source.

I

F

E

C

D

B

H

G

A

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

10

Remote Control

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

11

ENGLISH

1 POWER Power ON/OFF

2

MTS Select Mono, Stereo or SAP sound

3

INFO Display current information

4

SOUND Select sound modes

5

SLEEP Set timer to turn off TV

6

0~9, - number button Directly channel select

7

VOL+ and VOL- Adjust volume UP/DOWN

8

GUIDE Show electronic program guide (EPG)

9

FAV.A/D To skip or restore Favorite Channels

10

UP/ DOWN/ LEFT/ RIGHT/
ENTER button

UP/ DOWN for OSD function select and LEFT/ RIGHT
for function adjust
ENTER: Enter the function setting

11

INPUT Input source select

12

MUTE Volume mute ON/OFF

13

TV/CATV Swap between TV/CATV

14

PICTURE Select picture modes

15

RETURN Return to previous channel

16

CH▲ and CH▼ Adjust Channel UP/DOWN

17

FAV.CH Select from preset Favorite Channels

18

MENU On Screen Display (OSD) menu ON/OFF

Remote control button function as follow

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

12

ENGLISH

Video Menu — To adjust the picture quality

In TV, AV, S-Video, YPbPr, HDMI source:

•

Picture Mode: To select picture mode between User, Cinema, Sport, Vivid, and Hi-Bright.

•

Brightness: To adjust luminance of video. (right: Max, left: Min.)

•

Contrast: To adjust contrast of video. (right: Max, left: Min.)

•

Color: To adjust color. (right: brilliant color, left: pale color.)

•

Tint: To adjust tint level. (right: greenish tone, left: reddish tone.)

•

Sharpness: To adjust picture sharpness. (right: sharper, left: softer.)

ADVANCED OPERATION — OSD MENU

OSD Functions

In VGA source:

Note: When in AV, S-Video, YPbPr or HDMI source,the TV option on the left does not appear.

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

13

ENGLISH

Audio Menu — To set the audio quality and status

In TV source:

•

Color Temperature: Press ENTER to select color temperature from User, Cool, Normal,
and Warm.

When Color Temperature is selected to User, the R, G, B Gain level can be adjusted
separately.

•

Auto Adjust: Press ENTER to auto adjust picture’s horizontal position, vertical position,
fine tune and H-Size.

•

VGA: Press ENTER to adjust VGA setting.

＊

H. Position: To adjust the horizontal position of the picture.

＊

V. Position: To adjust the vertical position of the picture.

＊

Phase: To adjust delay time of phase in order to reduce the noise of picture.

＊

Clock: To adjust delay time of clock in order to reduce the noise of picture.

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

14

ENGLISH

In AV, S-Video, YPbPr, HDMI, VGA source:

•

Balance: To adjust left and right audio balance.

•

Bass: To adjust bass.

•

Treble: To adjust the treble.

•

Surround: To enjoy a concert hall effect, select “On” when stereo is playing.

•

Reverb: To enjoy the reverb sound effect of Concert, Living Room, Hall, Bathroom, Cave,
Arena, or Church.

•

Equalizer: To select equalizer modes from Rock, POP, Live, Dance, Techno, Classic, Soft.

•

SPDIF Type: To select SPDIF Type from Dolby Digital, PCM, or Off.

•

Auto Volume control: To turn On or Off Auto Volume control. (This function is only effective
in TV source.)

TV Menu — To set up for TV

It is only active in TV source.

•

Tuner Mode: To select Cable or Air as the TV source. Select “Cable” if you want to watch
Cable TV channels, and select Air to watch Air TV channels.

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

15

ENGLISH

•

Channel Skip: Press ENTER to skip the channel. To restore the channel, press ENTER
again.

•

Auto Scan: To auto scan the TV and DTV channels. Press ENTER to start auto scanning
Air and Cable TV channels. Press

MENU again at any time to interrupt scanning.

•

MTS: To select audio mode from Mono, Stereo, or SAP when available.

•

Audio Language: To select audio language from English, Spanish, or French.

Setup Menu — To set up OSD window

In TV, AV, S-Video, YPbPr, HDMI source:

Note: When in AV, S-Video, YPbPr or HDMI source,the TV option on the left does not appear.

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

16

ENGLISH

In VGA source:

•

OSD Language: To select an OSD language from English, Spanish or French.

•

Blue Mute: To set the background color to blue when there is no signal.

•

Time Setup: To set Time Zone, Time, Sleep Timer, and Auto Sleep.

＊

Time Zone: To select the time zone appropriate to your location.

＊

Time:

To set the current time.

Auto Synchronization: When “Auto Synchronization” is enabled, the date and time will
be automatically synchronized according to the program content.
Timer: To set power-on and power-off time.

＊

Sleep Timer: To set the off timer from 10~120 minutes.

＊

Auto Sleep: To set the off timer for longer intervals -- 1 hour, 2 hours, or 5 hours.

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

17

ENGLISH

•

Close Caption: To set close caption options.

＊

Analog Closed Caption: To set basic analog closed caption options. (CC1~CC4,
TEXT1~TEXT4, Off)

＊

Digital Closed Caption: To select closed caption signal formats and set up caption
modes for digital TV channels. (Service1~6, Off)

＊

Digital Caption Style: Press ◄► to select Caption Style from “As Broadcaster” or
“Custom”. When “Custom” is selected, use ▲▼ to select the desired controls, ◄► to
adjust detailed settings.

Font Size: To select a font size from Large, Small, or Medium.
Font Color: To select a font color from Black, White, Green, Blue, Red, Cyan, Yellow, or

Magenta.

Font Opacity: To select font opacity from Solid, Translucent, or Transparent.
Background Color: To select background color.
Background Opacity: To select background opacity.
Window Color: To select window color.
Window Opacity: To select window opacity.

＊

•

Memory Recall: To restore the factory default settings.

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

18

ENGLISH

Parental Menu — To set up Parental Control options

It is active in all input sources; however, when in AV, S-Video, YPbPr, HDMI, or VGA
source, the TV option on the left does not appear.

Enter password and the screen below will show. (The default password is 0000.)

•

Channel Block: To block channels. Use ▲▼ to select the channel you want to block, and
then press ENTER to block or unblock it.

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

19

ENGLISH

•

Program Block: To set TV and Movie Ratings.

＊

Rating Enable: Choose “On” to enable the below settings.

＊

U.S. TV Ratings: To adjust TV blocking level in the US. You can select between TV-Y,
TV-Y7, TV-G, TV-PG, TV-14, or TV-MA.

＊

U.S. Movie Ratings: To adjust movie blocking level in the US. You can select between G,
PG, PG-13, R, NC-17, or X.

The TV Ratings in the US are defined as following.

Use ENTER button to block or unblock the ratings, and use MENU to exit.

TV-Y All children TV-PG Parental guidance suggested

TV-Y7 Directed to older children: this

program is designed for children
age 7 and above

TV-14 Parents strongly cautioned: this

program contains some material
that is unsuitable for children
under 14 years of age

TV-G General audience TV-MA Mature audience only

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

20

ENGLISH

＊

The Canadian English Ratings are defined as following.

Use ENTER button to block or unblock the ratings, and use MENU to exit.

＊

Canadian English Ratings: To adjust blocking level in English-speaking region of
Canada. You can select between C, C8+, G, PG, 14+, 18+.

＊

Canadian French Ratings: To adjust blocking level in French-speaking region of
Canada. You can select between G, 8 ans +, 13 ans +, 16 ans +, 18 ans +.

The Canadian French Ratings are defined as following.

Use ENTER button to block or unblock the ratings, and use MENU to exit.

＊

Block Unrated: To block unrated movie or TV programs.

The movie Ratings in the US are defined as following.

Use ENTER button to block or unblock the ratings, and use MENU to exit.

G General audience R Restricted

PG Parental guidance suggested NC-17 No one 17 and under limited

PG-13 Parents strongly cautioned X Adult audience only

C Children PG Parental guidance

C8+ Children eight years and older 14+ Viewers 14 years and older

G General programming, suitable for

all audiences

18+

Adult programming

G General 16 ans + Not appropriate for children of

less than 16 years

8 ans + Children eight years and older 18 ans + Reserved to adults

13 ans + Not appropriate for children of less

than 13 years

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

21

ENGLISH

•

Input Block: To set the input source to be blocked. Users will not be able to watch the
content coming from the blocked input source.

Use ENTER button to block the input source, and press ENTER again to unblock.

•

Change Password: To change the password, press ENTER, and the following screen
appears.

Enter the new password from the remote control, and then enter the new password again
to confirm.

Note:

Please make sure you remember your new password after changing, because you

cannot recall the default setting of the password by any selection.

•

Clear All: To clear all the locks set before, press ENTER, and then select “OK” to confirm.

Notes:Initial password:0000
If you forget your initial password,you can press"3660"to resume.

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

22

4. Circuit Description

A. Analog Switch and Video input.

The MT5371 is a complete backend hardware and software solution. It consists of a DTV
backend decoder and a TV controller and combines a transport de-multiplexer, a high
definition MPEG-2 video decoder, an AC3 audio decoder, an LVDS transmitter, and an
NTSC/PAL/SECAM video decoder with a 3D comb filter.

On-chip advanced motion adaptive de-interlacer (MDDi™) generates very smooth picture

quality for motions.

A 3D comb filter added to the video decoder recovers great detail for still pictures. The special
color processing technology provides natural colors and true studio quality graphics.

Analog switch is built in MT5371 and accept CVBS, YPbPr, S-Video, RGB signal directly to
internal video front end. For most system application, there is no need to add external

components to add analog video multiplexer on board.

The video ADC sample analog input signals. After ADC, all signal processing is digital

domain. The source select multiplex all inputs from digital and analog video ports and route
them into Main data path.

B. 3D comb filter, Video Decoder, Deinterlacer and Scaling controller.

MT5371 includes 3D comb filter TV decoder to retrieve the best image from popular
composite signals. Embedded HDTV/VGA decoders let the high bandwidth input signals
perfectly reproduced. 8 bits digital port may accept all kinds of external digital input video
source. New advanced motion adaptive de-interlacer converts accordingly the interlace video
into progressive one with overlay of a 2D Graphic processor. Advanced full function color
processing with fully 10-bit path provides h ig h quality video contents. Independent two
Flexible scalers provide wide adoption to various LCD panels for two of different video
sources at the same time. MT5371 supports alpha blending for Video and two OSD planes. It
also supports 10bit gamma correction and advanced ditheri ng processi ng for LC D display with
6/8/10 bit output.

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

23

C. DTV and HDMI.

MT5112 is a fully integrated single-chip 8-VSB and 64/256-QAM demodulator. The chip is

designed specifically for the digital terrestrial HDTV and CATV receivers

. MT5112 includes a

10-bit A/D converter, 8-VSB/QAM demodulator, TCM (Trellis-Coded modulation) decoder,

and Reed- Solomon Forward Error Correction decoder. Moreover, an internal controller
handles the acquisition and tracking to ensure the best receiving performance.

The internal controller communicates with the external host controller via the I2C-compatible
interface, and also provides direct control to the RF tuner via the second I2C-compatible
interface.

MT5112 accepts either the direct IF signals and the IF signals are sampled by a 10-bit A/D
converter. Afterward, the digitized samples are further processed for adjacent channel

interference rejection. MT5112 measures the power level of the digitized sequence, and feeds
the control voltages back to the RF tuner and the IF amplifier respectively. The control
voltages are converted to analog signals through the on-chip 1-bit sigma-delta D/A converters
plus the off-chip R-C low-pass filters. The automatic gain control keeps the received power
level at a desired level and maximizes the received SNR.

The MT5371 includes a DTV Backend Decoder SOC which support flexible transport demux,

HD MPEG-2 video decoder, JPEG decoder, MPEG1,2, MP3, AC3 audio decoder.
It incorporates a processor for system control. The processor issues instructions to control the
peripheral via I²C. DDR

SDRAM is externally connected to the MT5371, the unified memory

allows all internal decoders can share data, which reduces external memory types and

capacities.

MT5371 is also including a fully HDMI-compliant receiver that fits directly into home theater

products such as LCD TVs, plasma TVs and HDTVs. The receiver is capable of supporting

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

24

bandwidths up to 150 MHz and video resolutions up to 1080p and WXGA.

The built-in High-bandwidth Digital Content Protection (HDCP) decryption engine secures the
digital link for transmission of valuable high-definition video and audio. Built-in HDCP

self-test engine simplifies manufacturing testing.

HDMI Transmitter will pull high HDMI_PLUG_POWER (pin 18 in connector) when the cable

is connected. LCD Controller will pull high HDMI_HPD (pin 19 in connector) to info the
HDMI transmitter that the receiver is ready. The HDMI transmitter sends the video & audio to
MT5371 via 3 Data TMDS pairs & 1 CLOCK TMDS pairs.

MT537x

ATSC+NTSC
Combo Tu ner

MT5112
(Demod.)

HDMI
Connector

HDCP
EEPROM

CVBS / SIF

DDR
SDRAM

DDR
SDRAM

Flash

LCD Module

System
EEPROM

D. Audio

When the Antenna receive the analog TV signal and modulate it to the CVBS signal which can
be recognized by the video decoder and SIF audio signal output to the sound decoder in the
MT5371.

When the Antenna receive the digital TV signal, RF signal will be converted to IF signals and
the IF signals will be modulated to the transport bitstream by MT5112. The MT5371 receives
bitstream input in TS format, and then separates the TS into audio and video PES, analyzing the

PES header, and transferring the PES to the audio and video decoders.

The MT8291 is a highly integrated stereo audio CODEC. The MT8291 performs stereo
analog-to-digital and two digital-to-analog conversions with single-ended analog voltage input
and output. It’s up to 24-bit serial values at sample rates up to 192 kHz. A 7:1 stereo input
multiplexer and an auto matic level control are included.

The three analog audio sources are put into MT8291 which first select the sources and do the
stereo analog-to-digital conversion with single-ended analog voltage input Sampled data is
transmitted through the serial audio interface at various rates from 32 kHz to 192 kHz.

The serial audio signals that coming from MT8291 are put into MT5371 for DSP and audio

effect processing. The serial audio signals output from MT5371 go into the MT8291 for doing
digital-to-analog conversion and then put analog audio signals into the IC YDA138. Two DAC
outputs from MT8291 reach 2Vrms in a 12V supply environment including a headphone, two
left/right line outputs with volume gain/attenuation from -127 dB to +12 dB and digital

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

25

de-emphasis function.

The IC YDA138 is a class-D amplifier that can be output power of 10Watts per channel on a

6-ohm load speaker when using a 12V power supply operation.

PC/DVI Audio(mini jack)

AV/SV Audio(RCAR/L)

MT8291
(Audio Codec)

YPbPr Audio(RCAR/L)

MT5371

I2S

YDA138
(Audio Amp.)

Speaker

HeadPhone

I2S

ATSC+NTSC
Combo Tuner

MT5112

SIF

TS

CVBS

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

26

5. Adjusting Procedure

1. Function Test

1.1. Product

26” LCD TV

1.2. Test Equipment

-PC signal generator: CHROMA 2525 CARD ,CHROMA 2327 or 2329,Pioneer
DV-S969AVi.

-TV and Video signal generator.

-Color analyzer: MINOLTA CA110.

-Power meter: CP-310A or CP-320A.

-AC power supply transformer: 110V/120V ±20% 60Hz ±5%.

-Digital ammeter

1.3. Test Condition

Before function test and alignment, each LCD TV should be run-in and warmed up for at
least 30 minutes with the following conditions:
(a) In room temperature,
(b) With full-white screen, and 16 grey scale,
(c) With cycled display modes.

1.4. Test Display Modes & Pattern

1.4.1 EEPROM INIT

A. Timing: 1366*768@60Hz
B. Pattern: 16*12 pane
C. Press ‘POWER’, ‘▲’and ‘ENTER’ at the same time, then go into the FACTORY

MODE.

Fig. 1 Fig. 2

D. Figure 1,Select EEPROM INITIAL and press ENTER. The act of EEPROM

INITIAL is completed when EEPROM INIT disappeared.

1.4.2 COLOR TEMPERATURE ADJUSTING

PC MODE:

A. Timing: 1360*768@60Hz.
B. Pattern: 16 grey scale.
C. LCD TV should be run-in and warmed up for at least 30 minutes.
D. Make sure the distance between SENOR of the CA110 and the LCD TV is about

20cm.

E. Color Temperature adjusting.

1.Fig. 1: under the picture 16 grey scale of VGA source, select WHITE
BALANCE and press ENTER, The color warm will auto adjust. The act of EHITE
BALANCEL is completed when the picture is steady.

2.After adjusting, switch to FULL WHITE and check the value of each color.
Preset color for N2635WM

x=0.283±0.015 y=0.298±0.015

3.Under the picture NTSC color bar of YPbPr source, select WHITE BALANCE

and press ENTER, The color warm will auto adjust. The act of EHITE
BALANCEL is completed when EHITE BALANCEL disappeared.

4.After adjusting, switch to FULL WHITE and check the value of each color.

ViewSonic Corporation Confidential - Do Not Copy N2635w-1M

27