ViewSonic E90f+ User Manual

Download

E90f+

Color Monitor

User Guide

Guide de l’utilisateur

Bedienungsanleitung

Guía del usuario

Guida dell'utente

Guia do usuário

Användarhandbok

ViewSonic

With Plug & Play

19" (18.0" Viewable Diagonal)

✘

Käyttöopas

Ɋɭɤɨɜɨɞɫɬɜɨ ɩɨɥɶɡɨɜɚɬɟɥɹ

Instrukcja obsáugi

Contents

Product Registration................................................... 2

For Your Records....................................................... 2

Getting Started

Package Contents...................................................... 3

Precautions ................................................................ 3

Quick Installation........................................................ 4

Using the Monitor

Setting the Timing Mode ............................................ 5

OSD Lock Settings..................................................... 5

Adjusting the Screen Image .......................................6

Main Menu Controls ...................................................8

Other Information

Specifications ...........................................................11

Troubleshooting .......................................................12

Customer Support ....................................................13

Cleaning the Monitor ................................................14

Limited Warranty ......................................................15

Appendix

Safety Guidelines .....................................................16

Compliance Information for U.S.A............................ 17

CE Conformity for Europe ........................................17

05/15/04 A ViewSonicE90f+ 1

Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.

Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries.

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation.

VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are trademarks of VESA.

NERGY STAR

As an E E

NERGY STAR

is a registered trademark of the U.S. Environmental Protection Agency (EPA).

partner, ViewSonic Corporation has determined that this product meets the

guidelines for energy efficiency.

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic Corporation.

Product Registration

To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic

CD-ROM also provides an opportunity for you to print the registration form, which you may mail or fax to ViewSonic.

For Your Records

Product Name: Model Number: Document Number: Serial Number: Purchase Date:

ViewSonic E90f+ VS10106 A-CD-E90f+-5 _______________ _______________

Product disposal at end of product life

ViewSonic is concerned about the preservation of our environment. Please dispose of this product properly at the end of its useful life. For TCO'03 recycling information, please refer to our website:

1. USA: www.viewsonic.com/pdf/recyclePlus.pdf

2. Europe: www.viewsoniceurope.com

3. Taiwan: recycle.epa.gov.tw

Wizard

ViewSonic E90f+ 2

Getting Started

Congratulations on your purchase of a ViewSonic® color monitor. Important!

Save the original box and all packing material for future shipping needs.

NOTE: The word “Windows” in this user guide refers to the following Microsoft

operating systems: Windows 95, Windows NT, Windows 98, Windows 2000, Windows Me (Millennium), and Windows XP.

Package Contents

Your package includes:

• Color monitor

• DB-15 video cable (attached)

• Power cord

• ViewSonic Wizard CD-ROM

NOTE:

The CD jacket contains the Quick Start Guide, and the CD includes the User Guide PDF files and INF/ICM display optimization files. The INF file ensures compatibility with Windows operating systems, and the ICM file (Image Color Matching) ensures accurate on-screen colors. ViewSonic recommends that you install both files.

Precautions

• For best viewing conditions sit at least 18" from the monitor.

• AVOID TOUCHING THE SCREEN WITH YOUR FINGERS. Oils from the skin are difficult to remove.

• NEVER REMOVE THE REAR COVER. The monitor contains high voltage parts. You may suffer serious injury if you touch these parts.

• Avoid exposing the monitor to direct sunlight or another heat source, including an open flame. The monitor should be facing away from direct sunlight to reduce glare.

• Always handle your monitor with care when moving it.

• Place your monitor in a well ventilated area. Do not place anything on the monitor that prevents adequate dissipation of heat.

• Ensure the area around the monitor is clean and free of moisture.

• Keep the monitor away from magnets, motors, transformers, speakers, and televisions.

• Do not place heavy objects on the monitor, video cable, or power cord.

• If smoke, abnormal noise, or strange odor is present, immediately switch the monitor off and call your dealer or ViewSonic. It is dangerous to continue using the monitor.

ViewSonic E90f+ 3

Quick Installation

1 Connect power cord

Connect the power cord to a properly grounded AC outlet.

2 Connect video cable

Make sure both the monitor and computer are turned OFF.

• Connect the video cable to the computer.

Macintosh

require a Macintosh adapter. Attach the adapter to the computer and plug the video cable into the adapter.

To order a ViewSonic contact ViewSonic. See “Customer Support” on page 13.

users: Models older than G3

Macintosh adapter,

3 Turn ON monitor and computer

Turn ON the monitor, then turn ON the computer. This sequence (monitor before computer) is very important.

NOTE: At this point Windows users may receive a message asking them to install the INF file.

4 Install Display Optimization files

(INF and ICM files)

(1) Insert the ViewSonic Wizard CD-ROM into your computer’s CD-ROM drive.

NOTE: If your computer does not have a CD-ROM drive, see “Customer Support” on page 13.

(Continued)

(2) Wait for the CD-ROM to auto-start. NOTE: If the CD-ROM does not auto-start:

double-click on the CD-ROM icon in Windows Explorer, then double-click on viewsonic.exe.

(3) Follow the on-screen instructions.

5 Windows users: Set the Timing

Mode (resolution and refresh rate)

Example: 1280 X 1024 @ 75Hz.

For instructions on changing the resolution and refresh rate, see the graphic card’s user guide.

Installation is complete. Enjoy your new ViewSonic color monitor.

To be best prepared for any future customer service needs: print this user guide and write the serial number in “For Your Records” on page 2. (See back of monitor.)

To register your product go online to www.viewsonic.com.

The ViewSonic Wizard CD-ROM also provides an opportunity for you to print the registration form which you may mail or fax to ViewSonic.

AC wall outlet

Power cord

Video cable

ViewSonic E90f+ 4

Using the Monitor

Setting the Timing Mode

Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1280 x 1024) and refresh rate (or vertical frequency;

example 75 Hz). After setting the timing mode, use the OnView to adjust the screen image.

For the best picture quality set your monitor timing mode to:

VESA 1280 x 1024 @ 75 Hz.

To set the Resolution:

Right-click on the Windows desktop.

Click Properties on the drop-down menu.

Click the Settings tab.

Move the slider pointer which displays in the Desktop area or Screen area in the window.

controls

NOTE: The refresh rate should already be set if you have done the CD installation (or refer to your graphics card documentation).

OSD Lock Settings

You have the option of using the On Screen Display (OSD) locking feature, OSD LOCK, to prevent unwanted changes to the current image settings.

• OSD Lock: Press and hold the [1] and [

for 5 seconds. The message “OSD LOCK” will then display briefly, indicating that the OSD image settings are now locked.

• OSD Unlock: Press and hold the [1] and [

message “OSD UNLOCK” will then display briefly, indicating that the OSD image settings are now unlocked.

▼] buttons on the face of the monitor

▼] buttons again for 5 seconds. The

ViewSonic E90f+ 5

Adjusting the Screen Image

Use the buttons on the front control panel to display and adjust the OnView

controls which display on the screen. The OnView controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 8.

MAIN MENU 2

DEGAUSS VIEWMATCH COLOR OSD POSITION MOIRE REDUCTION LANGUAGE MEMORY RECALL AUTO SIZING VIEWMETER

:EXIT

SELECT:

Main Menu With OnView controls

Front Control Panel

Switches between Normal, UltraBrite 3x and UltraBrite 5x modes.

"NORMAL: TEXT/SPREADSHEET":

When selected, this brightness level setting display a standard CRT brightness

of 120 nits for next and spreadsheet applications.

"ULTRABRITE 3x: GRAPHICS/GAME": When selected, this UltraBrite™ setting

displays up to 260 nits of brightness for optimum display performance of graphics applications and games .

"ULTRABRITE 5x: VIDEO/MOVIE/DVD": When selected, this UltraBrite™ setting

displays up to 450 nits of brightness for optimized display performance of video applications.

Displays the highlighted option or toggles between options

Power button

Displays the Main Menu or exits and saves

Scrolls through options or adjusts settings

Power light: green = on orange = power save

ViewSonic E90f+ 6

Do the following to adjust the screen image:

To display the Main Menu, press button [1].

MAIN MENU 1

CONTRAST/BRIGHTNESS H. SIZE/POSITION V. SIZE/POSITION ZOOM PINCUSHION/PIN BALANCE TRAPEZOID/PARALLEL TILT

:EXIT

To select a control you want to adjust, press the arrow buttons on the front

SELECT:

MAIN MENU 2

DEGAUSS VIEWMATCH COLOR OSD POSITION MOIRE REDUCTION LANGUAGE MEMORY RECALL AUTO SIZING VIEWMETER

:EXIT

SELECT:

control panel of your monitor and scroll through the choices. When the control you want is highlighted, press button [2].

NOTE: Some controls on the Main Menu are listed in pairs, such as Contrast/Brightness. Display control screen (sample shown in step 3 below). Press button [2] to toggle to the next control in the pair.

To adjust the selected control, such as

CONTRAST

in the sample below,

press the arrow buttons.



To save the control setting and Exit the menu press button [1] twice.

ViewSonic E90f+ 7

Main Menu Controls

Adjust the menu items shown below by using the up and down buttons.

Control Explanation

Contrast

adjusts the difference between the image

background (black level) and the foreground (white level).

Brightness

adjusts the background black level of the screen

image.

Horizontal Size

Horizontal Position

Vertical Size

Vertical Position

Zoom

Pincushion

expands and contracts the entire screen image.

adjusts width of the screen image.

moves the screen image left or right.

adjusts the height of the screen image.

moves the screen image up or down.

curves the vertical sides of the screen image.

Pin Balance

curves the vertical edges of the screen image to

the left or right.

Trap e zoid

adjusts the top and bottom of the screen image

until they have equal length.

Parallel

slants the vertical edges of the screen image until

they are parallel.

ViewSonic E90f+ 8

Control Explanation

Tilt rotates the entire screen image.

Degauss removes the build-up of magnetic fields that can

cause irregular colors to appear around the edges of screen images. There are two ways to degauss the display: automatically by turning the monitor on, or manually by selecting the Degauss control from the menu.

With Degauss selected from the menu, press button [2] to degauss the monitor manually.

Important: Do not degauss repeatedly. Doing so can be harmful to the display. Wait at least 20 minutes before

selecting this control again.

V. Moire (Vertical Moire) reduces horizontal interference

patterns that appear as ripples, waves, or unwanted background color textures. Interference patterns of this type are most noticeable when viewing images having closely spaced lines or finely detailed patterns.

H. Moire (Horizontal Moire) reduces vertical interference

ViewMatch Color provides several color options: several

preset color temperatures and User Color which allows you to adjust red (R), green (G), and blue (B). The factory setting for this product is 9300K (9300°Kelvin).

9300K — Adds blue to the screen image for cooler white

(used in most office settings with fluorescent lighting).

6500K — Adds red to the screen image for warmer white

and richer red.

5000K — Adds blue and green to the screen image for a

darker color.

User Color — Individual adjustments for red, green, and

blue.

ViewSonic E90f+ 9

Control Explanation

Language allows you to choose from among several

languages for the menus and control screens: English, French, German, Italian, Spanish, Traditional Chinese, Simplified Chinese, and Japanese.

OSD Position allows you to move the on-screen display

menus and control screens.

ViewMeter

displays the frequencies (horizontal and

vertical) coming from the graphics card of the computer.

Memory Recall returns adjustments to the original factory

settings if the display is operating in a factory preset timing mode listed in this user guide.

Exception: This control does not affect changes made with the User Color control.

Auto Adjust automatically adjusts horizontal and vertical size

of the screen image.

ViewSonic E90f+ 10

Other Information

Specifications

CRT

Input Signal

Compatibility

Resolution

Power

Display Area

Type Dot Pitch Phosphor Glass surface

Video Sync

PC Macintosh

Recommended and supported

Voltage AC 100-240 VAC

Default Full scan

19" (18.0" viewable diagonal area), 90

0.25 mm dot pitch, RGB medium/short persistence P22

TM~52.6%, anti-reflection and anti-static

RGB Analog (0.7/1.0Vp-p, 75 Ohms f

: 30-86 kHz, fv: 50-180 Hz

H/V Separate (TTL), Composite

VGA up to 1792 x 1344 Power Macintosh compatible from 640 x 480 to

1152 x 870

1600 x 1200 @ 60 Hz (VESA) 1280 x 1024 @ 75 Hz (VESA) 1024 x 768 @ 75, 85 Hz (VESA) 800 x 600 @ 75, 85 Hz (VESA) 640 x 480 @ 75, 85 Hz (VESA) 640 x 480 @ 60 Hz (VGA) 640 x 400 @ 70 Hz (VGA)

1024 x 768 @ 74.9 Hz (Mac) 1152 x 870 @ 75 Hz (Mac)

50/60 (+/- 3) Hz

352 mm (H) x 264 mm (V) (typical) 360 mm (H) x 270 mm (V) (depends on signal timing)

(may require Macintosh cable adapter)

deflection,

Operating Conditions

Storage Conditions

Dimensions

Weight

Temperature Humidity Altitude

Physical (monitor)

Net 24 kg (52.8 lb) (monitor only)

Regulations

Power Saving Modes

Macintosh models prior to G3 require a Macintosh adapter. To order a ViewSonic® Macintosh adapter,

contact Customer Support. You will need to provide the product serial number.

NOTE: This product was designed for operation in the magnetic fields of the hemisphere where it was purchased.

On Off

+32° F to +104° F (0° C to +40° C) 5% to 95% (no condensation) To 9,000 feet

-40° F to +140° F (-40° C to +60° C) 5% to 95% (no condensation) To 39,000 feet

455.5 mm (W) x 450 mm (H) x 460.5 mm (D)

17.9" (W) x 17.7" (H) x 18.13" (D)

UL/cUL, FCC-B, DHHS, ICES-003, EPA-Energy Star,

CB, MPR-II, CCC, BSMI, PSB, TUV/GS, TUV/Ergo.

< 110W TYPICAL (Green LED) < 4W (Orange LED)

ViewSonic E90f+ 11

Troubleshooting

No power

• Make sure power button (or switch) is ON.

• Make sure A/C power cord is securely connected to the back of the monitor and to a power outlet.

• Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage.

Power is ON but no screen image

• Make sure the video cable supplied with the monitor is tightly secured to the video output port on the back of the computer. If the other end of the video cable is not attached permanently to the monitor, tightly secure it to the monitor.

• Adjust brightness and contrast.

• Verify whether an adapter is required for proper signal continuity between graphics card and monitor.

Flickering

• Not enough power supplied. Connect the monitor to a different outlet. If using a surge protector, reduce the number of devices plugged in.

• Check the ViewMeter from the main menu to verify the refresh rate (vertical frequency) is 75 Hz or higher. See “Specifications” on page 11.

• Remove any devices from the area around the monitor that emit magnetic fields such as radios, surge protectors, unshielded speakers, fluorescent lights, AC power converters, desk fans, etc.

• Make sure the graphics card in your computer can use non-interlaced mode at the desired frequencies. To enable your graphics card to support higher refresh rates, try selecting fewer colors or running lower resolutions.

Wrong or abnormal colors

• If any colors (red, green, or blue) are missing, check the video cable to make sure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection.

• Connect the monitor to another computer.

• Select Degauss from the Main Menu. Do this only once.

• If you have an older graphics card, contact ViewSonic

Customer Support.

Entire screen image rolls vertically

• Make sure video input signals are within the monitor's specified frequency range.

• Try the monitor with another power source, graphics card, or computer system.

• Connect the video cable securely.

Control buttons do not work

• Press only one button at a time.

ViewSonic E90f+ 12

Customer Support

For technical support or product service, see the table below or contact your reseller.

NOTE: You will need the product serial number.

Country/ Region

United States

Canada

United Kingdom

Europe, Middle East, Baltic countries, and North Africa

Australia and New Zealand

Singapore/

Malaysia/Thailand

Web site T = Telephone

F = FAX

www.viewsonic.com/

support

www.viewsonic.com/

support

www.viewsoniceurope.com

www.viewsonic.com.au

www.viewsonic.com.sg

T: (800) 688-6688 F: (909) 468-1202

0800 833 648

T: F: (01293) 643910

Contact your reseller

T: +61 2 9906 6277 F: +61 2 9906 6377

T: 65 273 4018 F: 65 273 1566

service.us@ viewsonic.com

service.ca@ viewsonic.com

service.eu@ viewsoniceurope.com

service@au. viewsonic.com

service@sg. viewsonic.com

South Africa/ Other countries

Hong Kong

www.viewsonic.com

www.hk.viewsonic.com

T: 886 2 2246 3456

886 2 8242 3668

T: 886 2 2246 3456 F: 886 2 8242 3668 viewsonic.com

service@sd. viewsonic.com

service@hk.

ViewSonic E90f+ 13

Cleaning the Monitor

• MAKE SURE THE MONITOR IS TURNED OFF.

• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.

To clean the screen:

Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.

If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.

To clean the case:

Use a soft, dry cloth.

If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.

DISCLAIMER

ViewSonic does not recommend the use of any ammonia or alcohol-based cleaners on the monitor screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the monitor. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.

ViewSonic E90f+ 14

Limited Warranty

VIEWSONIC CRT MONITORS

What the warranty covers: ViewSonic

warranty period. If a product proves to be defective in material or workmanship during the warranty period, product or parts may include remanufactured or refurbished parts or components.

How long the warranty is effective:

ViewSonic

parts and three (3) years for all labor from the date of the first consumer purchase.

Who the warranty protects:

This warranty is valid only for the first consumer purchaser.

What the warranty does not cover:

1. Any product on which the serial number has been defaced, modified or removed.

2. Damage, deterioration or malfunction resulting from:

3. Removal, installation, and set-up service charges.

How to get service:

2. To obtain service under warranty, you will be required to provide (a) the original dated sales slip, (b)

3. Take or ship the product freight prepaid in the original container to an authorized

4. For additional information or the name of the nearest

warrants its products to be free from defects in material and workmanship during the

ViewSonic

a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product

modification, or failure to follow instructions supplied with the product. b. Repair or attempted repair by anyone not authorized by c. Any damage of the product due to shipment. d. Removal or installation of the product. e. Causes external to the product, such as electrical power fluctuations or failure. f. Use of supplies or parts not meeting g. Normal wear and tear. h. Any other cause which does not relate to a product defect.

For information about receiving service under warranty, contact ViewSonic Customer Support.

your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.

service center or

will, at its sole option, repair or replace the product with a like product. Replacement

color CRT monitors, including the display tubes, are warranted for three (3) years for all

ViewSonic.

ViewSonic

You will need to provide your product's serial number.

ViewSonic.

’s specifications.

ViewSonic

service center, contact

ViewSonic

Limitation of implied warranties:

THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Exclusion of damages:

VIEWSONIC'S LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE PRODUCT. VIEWSONIC SHALL NOT BE LIABLE FOR:

1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.

Effect of state law:

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so the above limitations and exclusions may not apply to you.

Sales outside the U.S.A. and Canada:

For warranty information and service on contact

ViewSonic CRT Monitor Warranty (V3.0) Release Date: 03-26-2002

ViewSonic

or your local

ViewSonic

dealer.

products sold outside of the U.S.A. and Canada,

ViewSonic E90f+ 15

Appendix

Safety Guidelines

CAUTION: CAUTION:

certified for the individual country. Some examples are listed below:

The socket-outlet should be installed near the equipment and be easily accessible. Use a power cable that is properly grounded. Always use the appropriate AC cord that is

USA................. UL

Canada............. CSA

Germany.......... VDE

Switzerland ..... SEV

Britain ............. BASE/BS

Japan ............... Electric Appliance Control Act

IMPORTANT NOTICE CONCERNING POWER CORD SELECTION

The power cord set for this unit has been enclosed and has been selected according to the country of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original cord set, or if the cord set is not enclosed. The female receptacle of the cord set must meet IEC-60320 requirements and may look like (Figure A1 below):

For the United States and Canada

In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA Labeled. For units which are mounted on a desk or table, type SVT or SJT cord sets may be used. For units which sit on the floor, only SJT type cord sets may be used. The cord set must be selected according to the current rating for your unit. Please consult the table below for the selection criteria for power cords used in the United States and Canada.

Cord Type Size of Conductors in Cord Maximum Current Rating of Unit

SJT 18 AWG

16 AWG 14 AWG

SVT 18 AWG

17 AWG

10 Amps 12 Amps 12 Amps

10 Amps 12 Amps

For European Countries

In Europe you must use a cord set which is appropriate for the receptacles in your country. The cord set is HARCertified, and a special mark that will appear on the outer sheath, or on the insulation of one of the inner conductors.

AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG SHOULD BE CUT OFF AND DISPOSED OF SAFELY.

THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN APPROPRIATE SOCKET.

If a new plug is to be fitted, please observe the wiring code as shown below.

If in any doubt, please consult a qualified electrician.

WARNING:

IMPORTANT:

If the coloured wires of the mains lead of this appliance do not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW.

The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED.

If you have any questions concerning which proper power cord to use, please consult with the dealer from whom you have purchased the product.

THIS APPLIANCE MUST BE EARTHED.

The wires in this mains lead are coloured in accordance with the following code:

Green-and-Yellow: Earth

Blue: Neutral

Brown: Live

ViewSonic E90f+ 16

Compliance Information for U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Warning To assure continued FCC compliance, the user must use grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a shielded BNC(5) cable. Also, any unauthorized changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device.

Notice for Japan

This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.

CE Conformity for Europe

The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility, and 73/ 23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety."

ViewSonic E90f+ 17

ViewSonic Corporation

ViewSonic E90f+ User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual