VIEWONHOME VOH1011 Operation Manual

VOH1011

VOH1011

Wireless Water Detector

Product Introducon

Technical Specficaon

Features

Installaon Noce

Installaon Steps

Operang Principle

Register The Detector In The Alarm System

Switch to Connection Mode on the control panel. press the test
button of the sensor twice. The conteol pannel beeps once: the
motion detector is registered. If you hear two beeps, the detector
has already been connected.

To check if the registration is compelete, arm the system and
trigger the sensor again. If the siren rings out, the registration
is successful.

Standards

Notes

Emergency Alarm Treatments

This product bears the selective sorting symbol for waste

electrical and electronic equipment(WEEE).This means

that this product must be handled pursuant to

European.Directive 2002/96/EC in order to be recycled or

dismantled to minimize its impact on the environment.

For

further information,please contact your local or regional

authorities.

Electronic products not included in the selective

sorting process are potentially dangerous for the

environment and human heath due to the presence of

hazardous substances.

In compliance with European law.

This product was designed and manufactured in

compliance with Directive 2002/95/EC of the European

Parliament and of the Council on the restriction of use of

certain hazardous substances in electrical and electronic

equipment (RoHS Directive - Rohs) and is deemed to

comply with the maximum concentration values set by the

European Technical Adaptation Committee(TAC).

Made in CHINA

Indicaons Summary