Viessmann VITOTRONIC 100, KK5 Technical Data Manual

Technical Data Manual

VITOTRONIC 100

Boiler control unit

for high temperature heating systems

Vitotronic 100

Model KK5, Part No. 7133 373

Boiler control

For elevated boiler water temperature operation

For heating systems with one high temperature heating
circuit (without mixing valve)

With analog boiler water temperature display

Viessmann quick-connect plug-in system

5265 489 v1.3 07/2004

Certified as a component part

of Viessmann boilers only

Product I nformation/Standard Equipment/
Application

Product Information

The benefits at a glance:

H Space heating circuit controlled by

room thermostat

H Single-stage boiler control

H Built-in boiler low temperature

protection

H Short assembly time and start-up due

to diagnostic and Rast-5 plug-in
systems

Modular structure

The control unit consists of:
system ON/OFF switch, temperature
display, pump aquastat for boiler
protection,

– adjustable high limit

(type RAK 51.1/3382, Mfg. Etheco or
type TR 97.55180.251, Mfg. EGO)

– fixed high limit

(type RAK 75.4/3412, Mfg. Etheco or
type STW 56.10525.400, Mfg. EGO)

– electronic circuit board with power

supply

– quick-connect Rast-5 plug-in system
– fixed high limit test terminals

Vitotronic 100, Model KK5

H Electronic boiler control:

– for single-boiler systems
– for heating circuits without mixing

valve

– for a single-stage burner
– with analog temperature display

Boiler-specific functions

The Vitotronic 100 controls the boiler
temperature according to heat deman d
input (room thermostat connections).
Boiler water temperature is limited
through the adjustable aquastat.
Minimum boiler water temperature
protection is achieved with the built-in
pump aquastat.

Standard Equipment

Vitotronic 100, Model KK5
(Part No. 7133 373)
with

H adjustable and fixed high limit

H built-in pump aquastat

H power supply cord

Technical data

Operating Voltage: 120 VAC
Operating Frequency: 60 Hz
Nominal Current: 6A
Power Consumption: 10 W
Certification: CSA certified

(in conjunction with
Viessmann Vitorond boiler)

Max. ambien t temperature:

– at operation: 32 to 104 ºF

0to 40ºC
(in rooms and installation sites
with normal ambient conditions)

– when storing or transporting:

–4 to +149 ºF

–20 to +65 ºC

Output rating:

– Heating circuit pump:3 FLA, 120 V
– Burner: 2 FLA, 120 V

(recycled and recyclable) paper.

Printed on environmentally friendly

Application

In conjunction with the following Viessmann boilers
Boiler Model and Series

Oil-fired hot water
heating boiler with
power burner

Viessmann Manufacturing Company (U.S.) Inc.
45 Access Road
Warwick, Rhode Island • 02886 • USA
Tel. [phone] • Fax [phone]
www.viessmann-us.com • [e-mail]

2

Vitorond 200

Fuel

Oil

Minimum boiler temperature protection

The minimum boiler water temperature is
selected with the adjustable pump
aquastat.

Minimum boiler water
temperature

without low
limit

with low limit
(average temp.)

104 ºF/40 ºC

Viessmann Manufacturing Company Inc.
750 McMurray Road
Waterloo, Ontario • N2V 2G5 • Canada
Tel. [phone] • Fax [phone]
www.viessmann.ca • [e-mail]

Technical information subject to change without notice.

5265 489 v1.3