Viessmann 7172173, 7172174, 7179113 Installation Instructions Manual

Installation instructions

for contractors

VIESMANN

LON communication module

Safety instructions

Please follow these safety instructions closely to prevent accidents
and material losses.

Safety instructions explained

Please note

This symbol warns against the

!

risk of material losses and envi­ronmental pollution.

When using gas as fuel, also close the
main gas shut-off valve and safeguard
against unauthorised reopening.

Note

Details identified by the word "Note"
contain additional information.

Installation, initial start-up, inspection,
maintenance and repairs must only be
carried out by a competent person
(heating engineer/installation contrac­tor).

Before working on the equipment/heat­ing system, isolate the power supply
(e.g. by removing a separate mains
fuse or by means of a mains isolator)
and safeguard against unauthorised
reconnection.

Repairing components which fulfil a
safety function can compromise the
safe operation of your heating system.
For replacements, use only original
spare parts supplied or approved by
Viessmann.

5780 510 GB 8/2017

Dispose after installation.

Application

LON communication module, part number
7172173 7172174 7179113

■ Boiler with the following
boiler and heating circuit
control units:
– Vitotronic 100,

type CC1E, CC1I, GC1,
GC1B, GC4, GC4B,
GC7B

– Vitotronic 200,

type CO1E, CO1I, FO1,
GW1, GW1B, GW7B

– Vitotronic 200,

type KO1B, KO2B

– Vitotronic 300,

type FW1, GW2, GW2B,
GW4, GW4B

■ Heating circuit control
units:
– Vitotronic 050
– Vitotronic 200-H

■ Heat pumps (as individual
appliances or lag applian­ces in a heat pump cas­cade) with the following
weather-compensated
control units:
– WPR 300
– Vitotronic 200,

type WO1A, WO1B,
WO1C

■ Cascade control unit in
multi boiler systems:
– Vitotronic 300-K,

type MW2, MW2B

– Vitotronic 333,

type MW2

■ Lead heat pump in heat
pump cascade:
Vitotronic 200,
type WO1B, WO1C

■ Boiler and heating cir­cuit control unit with
cascade function
Vitotronic 300,
type CM1E, CM1I

■ Oil/gas condensing
boilers with the fol­lowing weather-com­pensated control
units:
– Vitotronic 200,

type HO1, HO1A,
HO1B, HO1C

– Vitotronic 200,

type KW6, KW6A,
KW6B

– Vitotronic 200,

type HO1D, HO1E,
HO2B

5780 510 GB

2

B

A

Installation

Please note

Electronic assemblies can be

!

damaged by electrostatic dis­charge.
Prior to commencing any work,
touch earthed objects such as
heating or water pipes to dis­charge static loads.

For opening the control units
and position A in the following
diagrams, see the correspond­ing installation and service
instructions.

Vitotronic 100, 200, 300, 300-K, 333, 050, 200-H

■ Vitotronic 100, type GC1, GC1B,
GC4, GC4B, GC7B

■ Vitotronic 200, type GW1, GW1B,
GW4B

■ Vitotronic 050 and 200-H, type
HK1W, HK3W

■ Vitotronic 300, type GW2, GW2B,
GW4, GW4B

■ Vitotronic 300-K, type MW2, MW2B

■ Vitotronic 333, type MW2

Main control unit PCB

A

Vitotronic 100, 200, 300, type C...

■ Vitotronic 100, type CC1E

■ Vitotronic 200, type CO1E

■ Vitotronic 300, type CM1E

5780 510 GB

LON communication module

B

3

AB

B A

Installation

Main control unit PCB

A

(cont.)

■ Vitotronic 100, type CC1I

■ Vitotronic 200, type CO1I

■ Vitotronic 300, type CM1I

LON communication module

B

Main control unit PCB

A

4

LON communication module

B

5780 510 GB