Viessmann 5546 Operation Manual

Bedienungsanleitung
Operation Manual
5546
Tasten-Stellpult 3-begriffig
Push button panel 3-aspect
1. Wichtige Hinweise / Important information ........................................................ 2
2. Einleitung / Introduction ..................................................................................... 2
5. Technische Daten / Technical data .................................................................... 4
2
DE
EN
1. Wichtige Hinweise
Bitte lesen Sie vor der ersten Anwendung des Produktes bzw. dessen Einbau diese Bedienungsanleitung aufmerk­sam durch. Bewahren Sie diese auf, sie ist Teil des Pro­duktes.
1.1 Sicherheitshinweise
Vorsicht:
Verletzungsgefahr!
Für die Montage sind Werkzeuge nötig.
Stromschlaggefahr!
Die Anschlussdrähte niemals in eine Steckdose einfüh­ren! Verwendetes Versorgungsgerät (Transformator, Netzteil) regelmäßig auf Schäden überprüfen. Bei Schä­den am Versorgungsgerät dieses keinesfalls benutzen!
Alle Anschluss- und Montagearbeiten nur bei abge­schalteter Betriebsspannung durchführen!
Ausschließlich nach VDE/EN-gefertigte Modellbahn­transformatoren verwenden!
Stromquellen unbedingt so absichern, dass es bei einem Kurzschluss nicht zum Kabelbrand kommen kann.
1.2 Das Produkt richtig verwenden
Dieses Produkt ist bestimmt:
- Zum Einbau in Modelleisenbahnanlagen und Dioramen.
- Zum Anschluss an einen Modellbahntransformator (z. B. Art.-Nr. 5200) bzw. an einer Modellbahn­steuerung mit zugelassener Betriebsspannung.
- Zum Betrieb in trockenen Räumen.
Jeder darüber hinausgehende Gebrauch gilt als nicht bestimmungsgemäß. Für daraus resultierende Schäden haftet der Hersteller nicht.
1.3 Packungsinhalt überprüfen
Kontrollieren Sie den Lieferumfang auf Vollständigkeit:
- Tasten-Stellpult 3-begriffig
- 7 Stecker
- 2 Schrauben
- Verbindungselement
- Aufkleber
- Anleitung
2. Einleitung
Das Stellpult Art.-Nr. 5546 von Viessmann besitzt sechs separate Momenttaster in zwei Gruppen für die Steue­rung von dreibegriffigen Signalen.
Das Stellpult eignet sich außerdem zur Ansteuerung der Viessmann Standard-Licht-Einfahrsignale über den Si­gnalsteuerbaustein Art.-Nr. 5210 (ohne Zugbeeinflus­sung) oder über alle weiteren Signalmodule (z. B. Art.-Nr.
5224).
1. Important information
Please read this manual completely and attentively be­fore using the product for the first time. Keep this manual. It is part of the product.
1.1 Safety instructions
Caution:
Risk of injury!
For installation tools are required.
Electrical hazard!
Never put the connecting wires into a power socket! Regularly examine the transformer for damage. In case of any damage, do not use the transformer.
Make sure that the power supply is switched off when you mount the device and connect the cables!
Only use VDE/EN tested special model train trans­formers for the power supply!
The power sources must be protected to prevent the risk of burning cables.
1.2 Using the product for its correct purpose
This product is intended:
- For installation in model train layouts and dioramas.
- For connection to an authorized model train transformer (e. g. item-No. 5200) or a digital command station.
- For operation in dry rooms only.
Using the product for any other purpose is not approved and is considered incorrect. The manufacturer is not responsible for any damage resulting from the improper use of this product.
1.3 Checking the package contents
Check the contents of the package for completeness:
- Push button panel 3-aspect
- 7 Plugs
- 2 Screws
- Connector
- Sticker
- Manual
2. Introduction
The push button panel item-No. 5546 has got six sep­arate momentary contacts in two groups for controlling 3-aspect signals.
The panel can also be used for controlling the stand­ard light signals from Viessmann by the control module for light signals item-No. 5210 (without train control) or all further light signal control modules like e. g. item-No.
5224.
Loading...
+ 2 hidden pages