Page 1
Viega Eco Plus fixing element
Instructions for Use
for a barrier-free pre-wall installation
Model Year built:
8169.2 from 07/2011
en_INT
Page 2
Viega Eco Plus fixing element 2 from 10
Page 3
Table of contents
1 About these instructions for use 4
Table of contents
1.1
1.2
1.3
Target groups 4
Labelling of notes 4
About this translated version 5
2 Product information 6
2.1
2.1.1
2.2
2.2.1
Intended use 6
Areas of use 6
Product description 6
Overview 6
3 Handling 8
3.1
3.1.1
3.1.2
3.2
3.2.1
3.3
Assembly information 8
Installation dimensions 8
Required tools 8
Assembly 9
Mounting fixing element 9
Disposal 10
Viega Eco Plus fixing element 3 from 10
Page 4
About these instructions for use
1 About these instructions for use
Trade mark rights exist for this document, further information can be
found at
1.1 Target groups
The information in this instruction manual is directed at the following
groups of people:
n Heating and sanitary professionals and trained personnel
It is not permitted for individuals without the abovementioned training or
qualification to mount, install and, if required, service this product. This
restriction does not extend to possible operating instructions.
viega.com/legal
.
1.2 Labelling of notes
The installation of Viega products must take place in accordance with
the general rules of engineering and the Viega instructions for use.
Warning and advisory texts are set aside from the remainder of the text
and are labelled with the relevant pictographs.
DANGER!
This symbol warns against possible life-threatening injury.
WARNING!
This symbol warns against possible serious injury.
CAUTION!
This symbol warns against possible injury.
NOTICE!
This symbol warns against possible damage to property.
Notes give you additional helpful tips.
Viega Eco Plus fixing element 4 from 10
Page 5
1.3 About this translated version
This instruction for use contains important information about the choice
of product or system, assembly and commissioning as well as intended
use and, if required, maintenance measures. The information about the
products, their properties and application technology are based on the
current standards in Europe (e. g. EN) and/or in Germany
(e. g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/
Germany. These should serve as recommendations in the absence of
corresponding national regulations. The pertinent national laws, standards, regulations and guidelines, as well as other technical guidelines,
have priority over German/European guidelines in this manual: The
information is not binding for other countries and territories and should,
as mentioned, be considered as support.
About these instructions for use
Viega Eco Plus fixing element 5 from 10
Page 6
2 Product information
1
2
3
6
4
5
7
8
9
2.1 Intended use
2.1.1 Areas of use
The Viega Eco Plus fixing element is used for fixing supporting handles
onto the following Viega Eco Plus WC elements:
n Model 8108.1
n Model 8161.18
n Model 8161.2
n Model 8161.21
n Model 8161.95
Product information
2.2 Product description
2.2.1 Overview
Fig. 1: Component overview
Viega Eco Plus fixing element 6 from 10
1 - dowels and screws
2 - threaded plate and screw M8
3 - wall bracket
4 - threaded rod M8
5 - fixing element
6 - fixing screw, long
Page 7
7 - fixing screws, short
8 - grub screws
9 - Frame fixing
Product information
Viega Eco Plus fixing element 7 from 10
Page 8
3 Handling
3.1 Assembly information
3.1.1 Installation dimensions
Handling
Fig. 2: Dimensions model 8169.2
3.1.2 Required tools
The following tools are required for mounting:
n
drill with 10 mm drill bit
n fork or ring spanner: 17 mm
n Allen key: 6 mm
Viega Eco Plus fixing element 8 from 10
Page 9
3.2 Assembly
6
3.2.1 Mounting fixing element
Handling
The following steps are valid for mounting on the right as
well as the left-hand side.
Screw the frame fixing onto the back of the fixing element.
Push the screwed end into the upper fixing hole.
Push the fixing element as far as it will go against the WC element.
Screw in and tighten fixing screw at the top and grub screw at the
bottom.
Viega Eco Plus fixing element 9 from 10
Page 10
Handling
Mount wall fixing.
Place floor support at height of WC element and secure with screw.
3.3
Repeat mounting steps for the left-hand side.
Disposal
Separate the product and packaging materials (e. g. paper, metal,
plastic or non-ferrous metals) and dispose of in accordance with valid
national legal requirements.
Viega Eco Plus fixing element 10 from 10
Loading...