Viega Eco Plus
Model Year built:
8180.26 from 08/2007
en_INT
Viega Eco WC element
Instructions for Use
Viega Eco WC element 2 from 26
Table of contents
1 About this instruction for use 4
1.1
Target groups 4
1.2
Labelling of notes 4
1.3
About this translated version 5
2 Product information 6
2.1
Intended use 6
2.1.1
Areas of use 6
2.2
Product description 6
2.2.1
Overview 6
2.2.2
Compatible components 7
2.2.3
Sound protection 8
2.2.4
Technical data 8
2.3
Accessories 9
3 Handling 10
3.1
Assembly information 10
3.1.1
Mounting conditions 10
3.1.2
Installation dimensions 11
3.1.3
Required tools 11
3.2
Assembly 12
3.2.1
Mounting WC element 12
3.2.2
Connecting concealed cistern 19
3.2.3
Preparing optional actuation versions 24
3.2.4
Setting the flush volume 25
3.3
Cleaning and maintenance 26
3.4
Disposal 26
Table of contents
Viega Eco WC element 3 from 26
1 About this instruction for use
Trade mark rights exist for this document, further information can be
found at www.viega.com/legal-notices.
1.1 Target groups
The information in this instruction manual is directed at the following
groups of people:
n Heating and sanitary professionals and trained personnel
n Operators
n Consumers
n Drywall builder
It is not permitted for individuals without the abovementioned training or
qualification to mount, install and, if required, service this product. This
restriction does not extend to possible operating instructions.
The installation of Viega products must take place in accordance with
the general rules of engineering and the Viega instructions for use.
1.2
Labelling of notes
Warning and advisory texts are set aside from the remainder of the text
and are labelled with the relevant pictographs.
DANGER!
This symbol warns against possible life-threatening injury.
WARNING!
This symbol warns against possible serious injury.
CAUTION!
This symbol warns against possible injury.
NOTICE!
This symbol warns against possible damage to property.
About this instruction for use
Viega Eco WC element 4 from 26
Notes give you additional helpful tips.
1.3 About this translated version
This instruction for use contains important information about the choice
of product or system, assembly and commissioning as well as intended
use and, if required, maintenance measures. The information about the
products, their properties and application technology are based on the
current standards in Europe (e. g. EN) and/or in Germany
(e. g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/
Germany. These should serve as recommendations in the absence of
corresponding national regulations. The pertinent national laws, standards, regulations and guidelines, as well as other technical guidelines,
have priority over German/European guidelines in this manual: The
information is not binding for other countries and territories and should,
as mentioned, be considered as support.
About this instruction for use
Viega Eco WC element 5 from 26
2 Product information
2.1 Intended use
2.1.1 Areas of use
The Viega Eco Plus WC element is suitable for mounting on wall constructions in acc. with DIN EN 1996-1-1, DIN 1045 and support profiles
in acc. with DIN 18183.
2.2 Product description
2.2.1 Overview
The WC element is equipped as follows:
Fig. 1: Components
1 - Viega Eco WC element
2 - threaded rods for fixing sanitary objects
(gauges for bore hole 180 mm)
3 - adjustable feet
4 - drain elbow
5 - fixing height for the WC ceramic 330 mm
6 - Viega concealed cistern 2S
7 - water connection
8 - fixing set (not included in the scope of delivery model 8173)
9 - flush actuation site protection
Product information
Viega Eco WC element 6 from 26
2.2.2 Compatible components
The WC element is compatible with all common WC ceramics, even
with larger projection (barrier-free).
WCs with a fixing gauge for bore holes of 230 mm are not included.
The WC element can be extended by the following compatible components:
n odour extraction via flushing pipe (model 8310.26)
n connection installation set (model 8350.14)
n drain valve set (model 8180.0)
Mount the components in accordance with the instructions for use of
the components.
The odour extraction is suitable for the reduction of odour nuisance in
inside bathrooms and heavily frequented toilet facilities. The odour
extraction is directly connected to the ventilation system.
The installation set is suitable for the connection of an electrical actuation. The installation set consists of an empty pipe, a cavity wall socket
and the relative, required clip. The empty pipe connects the cavity wall
socket with the concealed cistern.
The drain valve set is suitable for the conversion to a flush plate from
the Visign for Style or Visign for More series. The drain valve set consists of the drain valve with drain valve seat and bow, an actuating
mechanism (dual-flush function) and an actuating rod set. The new
fixing panel can be used after the installation of the drain valve set.
Product
Name Model number
Standard Flush plate Standard 1 8180.1
Visign for Style Flush plate
Visign for Style 10
8315.1
Flush plate
Visign for Style 13
8333.1
Flush plate
Visign for Style 14
8334.1
Odour extraction
Connection installation set
Drain valve set
Compatible flush plates
Product information
Viega Eco WC element 7 from 26
Product Name Model number
Visign for Public Flush plate
Visign for Public 1
8326.1
cover plate 8326.9
Further compatible flush plates if using drain set 8180.0:
Product Name Model number
Visign for Style Flush plate
Visign for Style 11
8331.1
Flush plate
Visign for Style 12
8332.1
Flush plate
Visign for Style 12
8332.4
Visign for More Flush plate
Visign for More 100
8352.1
Flush plate
Visign for More 101
8351.1
Flush plate
Visign for More 102
8353.1
Flush plate
Visign for More 103
8355.1
Flush plate
Visign for More 104
8354.1
2.2.3 Sound protection
The WC element fulfils the requirements in acc. with DIN 4109 as well
as the increased requirements in acc. with
DIN 4109 (supplementary sheet 2) and the requirements in acc. with
VDI 4100 SSt I-SSt III.
2.2.4 Technical data
Small flush volume Factory setting approx. 3 l
Setting range approx. 3–4 l
Large flush volume Factory setting approx. ca. 6 l
adjustable to approx. 9 l
Flush volume
Product information
Viega Eco WC element 8 from 26