Viega Easytop XL Series, Easytop 2238.5XL Instructions For Use Manual

Easytop XL CRV slanted seat valve (com‐ bined free flow valve with backflow pre‐ venter) with flange connection
Instructions for Use
for potable water installation
Model Year built:
2238.5XL from 04/2017
en_INT

Table of contents

1 About these instructions for use 4
Table of contents
1.1
1.2
1.3
Target groups 4
Labelling of notes 4
About this translated version 5
2 Product information 6
2.1
2.2
2.2.1
2.2.2
2.3
2.3.1
2.3.2
2.3.3
2.3.4
2.3.5
2.4
2.4.1
2.5
Standards and regulations 6
Intended use 8
Areas of use 8
Media 8
Product description 8
Overview 9
Markings on components 9
Compatible components 10
Operating mode 10
Technical data 10
Information for use 11
Corrosion 11
Optional accessories 11
3 Handling 13
3.1
3.1.1
3.2
3.2.1
3.3
3.4
Assembly information 13
Mounting instructions 13
Assembly 13
Leakage test 13
Maintenance 14
Disposal 14
About these instructions for use

1 About these instructions for use

Trade mark rights exist for this document; for further information, go to viega.com/legal.

1.1 Target groups

The information in this manual is directed at heating and sanitary pro‐ fessionals and trained personnel.
Individuals without the abovementioned training or qualification are not permitted to mount, install and, if required, maintain this product. This restriction does not extend to possible operating instructions.
The installation of Viega products must take place in accordance with the general rules of engineering and the Viega instructions for use.
1.2
Labelling of notes
Warning and advisory texts are set aside from the remainder of the text and are labelled with the relevant pictographs.
DANGER! This symbol warns of possible life-threatening injury.
WARNING! This symbol warns of possible serious injury.
CAUTION! This symbol warns of possible injury.
NOTICE! This symbol warns of possible damage to property.
This symbol gives additional information and hints.

1.3 About this translated version

This instruction for use contains important information about the choice of product or system, assembly and commissioning as well as intended use and, if required, maintenance measures. The information about the products, their properties and application technology are based on the current standards in Europe (e. g. EN) and/or in Germany (e. g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/ Germany. These should serve as recommendations in the absence of corresponding national regulations. The relevant national laws, stand‐ ards, regulations, directives and other technical provisions take priority over the German/European directives specified in this manual: The information herein is not binding for other countries and regions; as said above, they should be understood as a recommendation.
About these instructions for use
Loading...
+ 9 hidden pages