Advantix Vario shower channel
standing grate, wall
INT
for Advantix Vario shower channel base unit, wall model 4967.10,
4968.10
ModelYear built (from)
4967.3001/2016
Table of contents
Table of contents
1About these instructions for use
1.1 Target groups3
1.2 Labelling of notes3
1.3 About this translated version4
1.4 Other applicable documents4
2Product information5
2.1 Product description5
2.1.1 Overview5
3Handling6
3.1 6
3.1.1 Installation dimensions6
3.2 Assembly7
3.2.1 Care11
3.3 Disposal12
3
Advantix Vario shower channel standing grate, wall
2
1About these instructions for use
Trade mark rights exist for this document; for further information, go to
viega.com/legal.
1.1Target groups
The information in this instruction manual is directed at the following
groups of people:
n Heating and plumbing experts and trained personnel
Individuals without the abovementioned training or qualification are not
permitted to mount, install and, if required, maintain this product. This
restriction does not extend to possible operating instructions.
About these instructions for use
1.2
Labelling of notes
The installation of Viega products must take place in accordance with
the general rules of engineering and the Viega instructions for use.
Warning and advisory texts are set aside from the remainder of the text
and are labelled with the relevant pictographs.
DANGER!
This symbol warns of possible life-threatening injury.
WARNING!
This symbol warns of possible serious injury.
CAUTION!
This symbol warns of possible injury.
Advantix Vario shower channel standing grate, wall
NOTICE!
This symbol warns of possible damage to property.
This symbol gives additional information and hints.
3
1.3About this translated version
This instruction for use contains important information about the choice
of product or system, assembly and commissioning as well as intended
use and, if required, maintenance measures. The information about the
products, their properties and application technology are based on the
current standards in Europe (e.g. EN) and/or in Germany
(e.g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/
Germany. These should serve as recommendations in the absence of
corresponding national regulations. The relevant national laws, stand‐
ards, regulations, directives and other technical provisions take priority
over the German/European directives specified in this manual: The
information herein is not binding for other countries and regions; as said
above, they should be understood as a recommendation.
About these instructions for use
1.4Other applicable documents
This instruction for use describes the mounting of an accessory set for
an Advantix Vario shower channel in rough steps.
The instructions for use of the Advantix Vario shower
channel must also be strictly observed for the mounting of
the accessory set.
Advantix Vario shower channel standing grate, wall
4
2Product information
"
"
#
#
$
$
2.1Product description
The standing grate set may be mounted only in Viega Advantix Vario
shower channel base units, wall model 4967.10 and 4968.10.
Advantix Vario shower channel standing grate, wall
5
3Handling
3.1
3.1.1Installation dimensions
Handling
Advantix Vario shower channel standing grate, wall
Fig. 2: Installation dimensions
6
3.2Assembly
Handling
▶ Remove the site protection inserts.
▶ Fit the sieve insert in the area of the drain hole.
▶ Assembly example on left-hand side: Push the standing grate holder
onto the mounting tool.
Advantix Vario shower channel standing grate, wall
7
NN
NN
Handling
▶ Mount the standing grate holder on the tile edge profile using the
mounting tool.
▶ Push the grate holder until it is 10 mm away from the tile surface.
▶ Push the grate holder until it is 10 mm away from the tile surface.
▶ Check that the standing grate holder is correctly positioned.
Advantix Vario shower channel standing grate, wall
8
▶ Determine the length to be cut off.
9
9
X = length to be shortened
▶ Cut off length X.
Handling
▶ Insert the standing grade support.
▶ Push the standing grate support onto the mounting tool.
Select the standing grate support length from the list:
n Standing grate support A at surface height (tiles and adhesive)
10‑16 mm
n Standing grate support B at surface height (tiles and adhesive)
15‑23 mm
n Standing grate support C at surface height (tiles and adhesive)
23‑28 mm
Advantix Vario shower channel standing grate, wall
9
-
-
-
9
9
Handling
▶ Mount the standing grate support on the tile edge profile using the
mounting tool.
▶ Check the standing grate support is correctly positioned.
▶ Distribute the supports evenly.
▶ Determine the standing grate length.
▶ Shorten and deburr the standing grate.
NOTICE!
The standing grate must not be shortened with a
cutting disc (angle grinder).
If required, shorten the standing grate with a handsaw and deburr.
Advantix Vario shower channel standing grate, wall
10
▶ Insert the standing grate.
▶ Press the cover caps on.
Handling
3.2.1Care
NOTICE!
Risk of damage due to unsuitable cleaning
agent.
The following cleaning agents can damage chrome-plated
surfaces and therefore may not be used:
n scouring agent
n abrasive sponges
n lime, plaster or cement dissolver
n solvents or other acidic cleaning agents
Normal soap or a mild cleaning agent can be used for regular care and
prevention of lime scale. Under no circumstances should scouring agent
or scratching objects be used.
Strong stains, even around the drain unit and the siphon, can be
removed using typical household cleaner. Please note that the cleaning
agent must be rinsed off thoroughly with clear water after the prescribed
soaking time. There should be no residue on the components.
Advantix Vario shower channel standing grate, wall
11
3.3Disposal
Handling
Separate the product and packaging materials (e. g. paper, metal,
plastic or non-ferrous metals) and dispose of in accordance with valid
national legal requirements.
Advantix Vario shower channel standing grate, wall
12
Viega Technology GmbH & Co. KG
service-technik@viega.de
viega.com
INT • 2020-09 • VPN200026
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.