Page 1
Instructions for Use
Advantix Vario shower channel
standing grate
INT
For Advantix Vario shower channel base unit model 4965.10,
4966.10
Model
4965.30
Page 2
Table of contents
Table of contents
1 About these instructions for use
1.1 Target groups 3
1.2 Labelling of notes 3
1.3 About this translated version 4
1.4 Other applicable documents 4
2 Product information 5
2.1 Standards and regulations 5
2.2 Certification 5
2.3 Product description 5
2.3.1 Overview 6
3 Handling 7
3.1 7
3.1.1 Installation dimensions 7
3.2 Assembly 8
3.2.1 Care 11
3
3.3 Disposal 11
Advantix Vario shower channel standing grate
2
Page 3
1 About these instructions for use
Trade mark rights exist for this document; for further information, go to
viega.com/legal.
1.1 Target groups
The information in this instruction manual is directed at the following
groups of people:
n Heating and sanitary professionals and trained personnel
Individuals without the abovementioned training or qualification are not
permitted to mount, install and, if required, maintain this product. This
restriction does not extend to possible operating instructions.
About these instructions for use
1.2
Labelling of notes
The installation of Viega products must take place in accordance with
the general rules of engineering and the Viega instructions for use.
Warning and advisory texts are set aside from the remainder of the text
and are labelled with the relevant pictographs.
DANGER!
This symbol warns of possible life-threatening injury.
WARNING!
This symbol warns of possible serious injury.
CAUTION!
This symbol warns of possible injury.
Advantix Vario shower channel standing grate
NOTICE!
This symbol warns of possible damage to property.
This symbol gives additional information and hints.
3
Page 4
1.3 About this translated version
This instruction for use contains important information about the choice
of product or system, assembly and commissioning as well as intended
use and, if required, maintenance measures. The information about the
products, their properties and application technology are based on the
current standards in Europe (e.g. EN) and/or in Germany
(e.g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/
Germany. These should serve as recommendations in the absence of
corresponding national regulations. The relevant national laws, stand‐
ards, regulations, directives and other technical provisions take priority
over the German/European directives specified in this manual: The
information herein is not binding for other countries and regions; as said
above, they should be understood as a recommendation.
About these instructions for use
1.4 Other applicable documents
This instruction for use describes the mounting of an accessory set for
an Advantix Vario shower channel in rough steps.
The instructions for use of the Advantix Vario shower
channel must also be strictly observed for the mounting of
the accessory set.
Advantix Vario shower channel standing grate
4
Page 5
2 Product information
2.1 Standards and regulations
The following standards and regulations apply to Germany / Europe and
are provided as a support feature.
2.2 Certification
Data acc. to DIN EN 1253, Table 7
Product information
manufacturer Viega Holding GmbH & Co.KG
manufacturer identification mark
Certificate of conformity
Address Viega Technology GmbH & Co.KG
Viega Platz 1
57439 Attendorn
Germany
Relevant standard DIN EN 1253-2
Load class K3
Product class with respect to
temperature behaviour
A
2.3 Product description
The standing grate set may only be mounted in Viega Advantix Vario
shower channels model 4965.10 and 4966.10.
Advantix Vario shower channel standing grate
5
Page 6
2.3.1 Overview
Product information
Model 4965.30
Article 686 284
Description Advantix Vario standing grate
Fig. 1: Scope of delivery
1 Standing grate
2 Adjusting screws
3 Grate support
4 Sieve insert
5 Cover caps
6 Standing grate holder
Advantix Vario shower channel standing grate
6
Page 7
3 Handling
3.1
3.1.1 Installation dimensions
Handling
Advantix Vario shower channel standing grate
Fig. 2: Installation dimensions
7
Page 8
3.2 Assembly
Handling
▶ Remove the site protection.
▶ Fit the sieve insert.
▶ Insert the adjusting screw.
Advantix Vario shower channel standing grate
8
Page 9
NN
-
m
ax. 1,5 mm
Handling
▶ Place the standing grate holder on the adjusting screw and adjust to
tile level.
INFO! The max. standing grate height is 20 mm above the
channel flange, using natural stone set (art. no. 686 321)
30 mm.
The upper edge of the standing grate holder must be approx. 1 mm
▶
below the upper edge of the tiles.
▶ Determine the standing grate length.
NOTICE!
The standing grate must not be shortened with a cut‐
ting disc (angle grinder).
▶ If required, shorten the standing grate with a handsaw and deburr.
Advantix Vario shower channel standing grate
9
Page 10
▶ Fix the grate support at the standing grate.
犄
▶ Insert the standing grate.
Handling
▶ The cover caps can be moved by up to 9 mm.
▶ Adjustability of the cover caps.
Advantix Vario shower channel standing grate
10
Page 11
3.2.1 Care
Handling
NOTICE!
Risk of damage due to unsuitable cleaning
agent.
The following cleaning agents can damage chrome-plated
surfaces and therefore may not be used:
n Scouring agent
n Abrasive sponges
n Lime, plaster or cement dissolver
n Solvents or other acidic cleaning agents
Normal soap or a mild cleaning agent can be used for regular care and
prevention of lime scale. Under no circumstances should scouring agent
or scratching objects be used.
Strong stains, even around the drain unit and the siphon, can be
removed using typical household cleaner. Please note that the cleaning
agent must be rinsed off thoroughly with clear water after the prescribed
soaking time. There should be no residue on the components.
3.3 Disposal
Separate the product and packaging materials (e. g. paper, metal,
plastic or non-ferrous metals) and dispose of in accordance with valid
national legal requirements.
Advantix Vario shower channel standing grate
11
Page 12
Viega Technology GmbH & Co. KG
service-technik@viega.de
viega.com
INT • 2020-08 • VPN200022
Loading...