Viega 2230.12, 2230.52 Instructions For Use Manual
Easytop mounting unit with SC-Contur
Instructions for Use
for water meters
Model Year built:
2230.12 from 02/2008
en_INT
Easytop mounting unit with SC-Contur 2 from 24
Table of contents
1 About these instructions for use 4
Table of contents
1.1
1.2
1.3
Target groups 4
Labelling of notes 4
About this translated version 5
2 Product information 6
2.1
2.2
2.2.1
2.2.2
2.3
2.3.1
2.3.2
2.3.3
2.3.4
2.3.5
2.3.6
2.3.7
2.4
2.4.1
Standards and regulations 6
Intended use 9
Areas of use 9
Media 9
Product description 9
Overview 9
Press connection with SC-Contur 10
Sealing elements 11
Threaded connection 12
Markings on components 12
Compatible components 12
Technical data 13
Information for use 13
Corrosion 13
3 Handling 14
3.1
3.1.1
3.1.2
3.1.3
3.2
3.2.1
3.2.2
3.2.3
3.2.4
3.2.5
3.2.6
3.2.7
3.3
3.4
Easytop mounting unit with SC-Contur 3 from 24
Assembly information 14
Permitted exchange of sealing elements 14
Mounting instructions 14
Required tools 15
Assembly 16
Replacing the sealing element 16
Shortening the pipes 16
Pressing the connection 17
Mounting preparation 19
Horizontal installation 19
Vertical installation 22
Leakage test 23
Maintenance 23
Disposal 24
About these instructions for use
1 About these instructions for use
Trade mark rights exist for this document; for further information, go to
viega.com/legal.
1.1 Target groups
The information in this manual is directed at heating and sanitary pro‐
fessionals and trained personnel.
Individuals without the abovementioned training or qualification are not
permitted to mount, install and, if required, maintain this product. This
restriction does not extend to possible operating instructions.
The installation of Viega products must take place in accordance with
the general rules of engineering and the Viega instructions for use.
1.2
Labelling of notes
Warning and advisory texts are set aside from the remainder of the text
and are labelled with the relevant pictographs.
DANGER!
This symbol warns of possible life-threatening injury.
WARNING!
This symbol warns of possible serious injury.
CAUTION!
This symbol warns of possible injury.
NOTICE!
This symbol warns of possible damage to property.
This symbol gives additional information and hints.
Easytop mounting unit with SC-Contur 4 from 24
1.3 About this translated version
This instruction for use contains important information about the choice
of product or system, assembly and commissioning as well as intended
use and, if required, maintenance measures. The information about the
products, their properties and application technology are based on the
current standards in Europe (e. g. EN) and/or in Germany
(e. g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/
Germany. These should serve as recommendations in the absence of
corresponding national regulations. The relevant national laws, stand‐
ards, regulations, directives and other technical provisions take priority
over the German/European directives specified in this manual: The
information herein is not binding for other countries and regions; as said
above, they should be understood as a recommendation.
About these instructions for use
Easytop mounting unit with SC-Contur 5 from 24
2 Product information
2.1 Standards and regulations
The following standards and regulations apply to Germany / Europe and
are provided as a support feature.
Regulations from section: Fields of application
Scope / Notice Regulations applicable in Ger‐
Product information
many
Planning, execution, operation
and maintenance of potable water
installations
Planning, execution, operation
and maintenance of potable water
installations
Planning, execution, operation
and maintenance of potable water
installations
Planning, execution, operation
and maintenance of potable water
installations
Planning, execution, operation
and maintenance of potable water
installations
Planning, execution, operation
and maintenance of potable water
installations
Planning, execution, operation
and maintenance of potable water
installations
DIN EN 806, part 1
DIN EN 806, part 2
DIN EN 806, part 3
DIN EN 806, part 4
DIN EN 806, part 5
DIN EN 1717
DIN 1988
Planning, execution, operation
and maintenance of potable water
installations
Planning, execution, operation
and maintenance of potable water
installations
Regulations from section: Media
Scope / Notice Regulations applicable in Ger‐
Suitability for drinking water Trinkwasserverordnung (TrinkwV)
Easytop mounting unit with SC-Contur 6 from 24
VDI/DVGW 6023
Trinkwasserverordnung (TrinkwV)
many
Regulations from section: Product description
Scope / Notice Regulations applicable in Ger‐
Product information
many
Suitability for drinking water
installations
Suitability for drinking water
installations
Requirements in plastic compo‐
nents in drinking water installa‐
tions
Regulations from section: Overview
Scope / Notice Regulations applicable in Ger‐
Compliance with the inspection
requirements (fittings group I)
Regulations from section: Threaded connection
Scope / Notice Regulations applicable in Ger‐
Threaded pair DIN EN 10226-1
Trinkwasserverordnung (TrinkwV)
DIN 50930-6
DVGW-Arbeitsblatt W270
many
DIN EN 1213
many
Permitted sealants DIN 30660
Permitted sealants DIN EN 751-2
Regulations from section: Marking on components
Scope / Notice Regulations applicable in Ger‐
Designation noise class I DIN EN 1213
EA marking for classification DIN EN 1717
many
Easytop mounting unit with SC-Contur 7 from 24
Regulations from section: Compatible components
Scope / Notice Regulations applicable in Ger‐
Permitted pipe types DVGW-Arbeitsblatt W 534
Permitted copper pipes DVGW-Arbeitsblatt GW 392
Permitted copper pipes DIN EN 1057
Permitted stainless steel pipes DVGW-Arbeitsblatt GW 541
Permitted stainless steel pipes DIN EN 10312
Permitted stainless steel pipes DIN EN 10088
Regulations from section: Corrosion
Product information
many
Scope / Notice Regulations applicable in Ger‐
External corrosion protection DIN EN 806-2
External corrosion protection DIN 1988-200
External corrosion protection DKI-Informationsdruck i. 160
Regulations from section: Leakage test
Scope / Notice Regulations applicable in Ger‐
Leakage test for potable water
installations
Leakage test for potable water
installations
Regulations from section: Maintenance
many
many
DIN EN 806, part 4
ZVSHK-Merkblatt
„Dichtheitsprüfungen von Trink‐
wasserinstallationen mit Druckluft,
Inertgas oder Wasser‟
Scope / Notice Regulations applicable in Ger‐
many
Operation and maintenance of
DIN EN 806-5
potable water installations
Easytop mounting unit with SC-Contur 8 from 24
Loading...