Vidy V-IRN1HD-W User Manual

V-IRN1HD-W Color Camera

Weatherproof IR Color Camera

Specification

Packing List

No Name Model Number

1. Weatherproof IR Color Camera V-IRN1HD-W 1

2. User Guide V-IRN1HD-W 1

Franchiser：

Notes:Before providing power for the

camera, please read this User Guide in
detail!

Do not attempt to disassemble the camera.
If the camera can not work, please contact
local franchiser or our company.

Model

V-IRN1HD-W

Pick up Element 1/3" SONY 1.3Megapixel CMOS Sensor

Effective Picture Elements

(H×V)

1305(H) X1049(V)

Resolution 720P

Minimum Illumination

0.01Lux /F1.2

S/N Ratio

More than 50dB

Scanning System

2:1 interface

Synchronous System

Internal, Negative sync.

Auto Electronic Shutter

NTSC: 1/60s~1/100, 000s, PAL: 1/50s~1/100,000s

Gama Characteristic

0.45

IR Distance

40 Meters (with ￠5X42PCS Infrared LED)

IR Status

Under 10Lux by CDS

IR Power On

CDS AUTO Control

Video Output

1Vpp, 75Ω

Auto Gain Control

Auto

Power/Current

DC12V (+/-10%)/500mA

Lens

2.8-12mm Manual Zoom Lens

Dimension (mm)

275(W) x 91(H) x 80(D)

Weight (g)

1400

Storage Temperature

-30~+60℃ RH95% MAX

Operating Temperature

-10~+50℃ RH95% MAX

INTRODUCTION

Congratulations on your purchase of this product.

This User Guide suits V-IRN1HD-W product. We adopt
the latest CMOS technical of sensor and driver. The most
attractive characteristics are small and easy hidden, suits
the elevator and corridor. In addition, it owns the charac­ters of high definition and stability, strong anti-jamming,
rich and real color. Fixing and using this model are con­venient too. It is very good for you to apply to your CCTV
system.

Please read this instruction manual carefully to en-

sure proper use of the product.

CONNECTING

BRIEF OF PRODUCT

* Sensor (CMOS)

Adopt SONY 1/3" CMOS Sensor.
* Auto Gain Control (AGC)

Built-in auto gain control (AGC) circuit. The color camera
can get high definition picture in low Lux condition.

* Scanning Mode
NTSC or PAL mode.

* Water Resistance

IP66

* OSD SETTING

DC12V Power Supply

Monitor

V-IRN1HD-W

TROUBLE AND SOLUTION

Link wire rule：

Power

Video

Note:

● Please note the camera’s operating temperature and its using

environment requirement. Avoid using the camera at too high
or too low temperatures. The operating temperature is -

30~+60℃. (Recommendatory operati ng temperature is ­10~+50℃.)

● Never make the camera face the sun or bright object. Other-

wise, it will damage the CMOS.

● Do not mount the camera near by the radiator or heater.

1. No Picture after providing power

. May be the power supply voltage abnormity, please check the power
supply voltage and pole whether exactitude.
. Please check all the connecting cable and monitors whether be connected
correctly or not.

2. The picture level direction have flowing interference ripples

. May be caused by the power supply AC ripples, it need filter the wave of the
power supply.
. Check the monitor and peripheral equipments used.

3. The picture background color changes continuously

. The fluorescent lamp’s electromagnetic field cause color roll. This is proper
phenomenon of the cameras.
. Reduce the fluorescent lamp numbers or increase the distance between the
camera and the fluorescent lamps can improve it.
. Use power supply external sync. camera can solve it.

4. The picture smear too mass

. The power supply’s voltage unstable.
. Connecting cables not connect correctly or have high impedance.

The symbol is intended to alert the user to the presence of

The symbol is intended to alert the user to the presence of

important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.

uninsulated ‘dangerous voltage’ within the product’s

enclosure that may be of sufficient Magnitude to consti­a risk of electric shock to persons.

Video

DC12V

CAUTION:

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK
DO NOT REMOVE COVER OR BACK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING

RISK OF ELECTRIC. DO NOT OPEN

CAUTION: TO PREVENT ELECTRIC SHOCKS AND RISK OF

FIRE HAZARDS, DO NOT USE OTHER THAN
SPECIFIED POWER SOURCE.

OSD

SET

IMAGE

3D-NR ON/OFF

AE MODE

GLOBAL/CENTE R/CENTERWEIGHT/BLACK
LIGHT/FRONT LIGHT/DISTINGUISH

IMAGE ENHANCE SHARPNESS/CONTRAST/SATURATION

MIRROR ON/OFF

FLIP ON/OFF

BRIGHTNESS 0.10.20......250

ZOOM IN 50. 60. 70. 80. 90. 100

DAY&NI

GHT

AUTO

IR-CUT

WB

AWB-PRO

AWB-TEMPORAL

AWB-AI

AWB-SZ

AWB-GW

AWB-CCT

ZONE

MASK-

ING

COLOR

MOS AIC/W HITE/ YELLOW /CYAN /GREE N/
MAGENTA/RED/BLUE/BLACK

AREA NO.0 - AREA

NO.7

DIREC-

TION

AREA NO.0 - AREA

NO.3

ENGLISH

LAN-

GUAGE

CHINESE

LOAD DEFAULT

SOFT VERION

SAVE&EXIT

MENU

UP

DOWN

RIGHT

LEFT

PRESS

KEY BOARD