Vidonn Smartband X6 Instruction Manual

User’s Manual

Vidonn™ Smartband X6

Thank you for choosing Vidonn™ Smartband which features advanced design and
technology skills, provides more better help and enjoyment for your daily activities
and sports to create a more healthier life for you. This manual is a brief
introduction of smartband functions & features.

Getting started

Download the Vidonn™ app:

A. Search in AppStore or GooglePlay for “Vidonn”, then download and install with your

smartphone;

B. Official website: http://www.vidonn.com/download.html;

C. Scan two-dimension code:

iOS app Android apk

*Remark: due to the built-in shield of WeChat explorer, WeChat scanning is not supported!

Charging Smartband

Contact the wire end with magnetic points onto Smartband bottom pins, plug the other end

with standard 5V/2A USB into power source to fully charge the Smartband for a few hours

before using.

Note: if cannot attach to bottom pins exactly just turn the contact direction around!

1

Pair with iOS® Device

1. Make sure your device’s Bluetooth is on.

2. Make sure your smartphone’s Bluetooth is on.

3. Launch Vidonn™ app and create a new account.

4. Select Smartband Model:

5. Then tap “Search” on your device:

Remark: when tap “Search”, please keep the Smartband within 5cm range with your

device.

6. When Smartband is found, there will be a pop-up request for Pairing, then tap “Pair”:

7. The app will direct to “Personal Information” page for you to set height, age, weight,

2