Vido.at AU-G35M-SB18, AU-G35M-SC18, AU-G35M-SB26, AU-G35M-SB36, AU-G35M-SB26WD User Manual

AU-G35M

USER'S MANUAL

v1.0

Mobile PTZ Camera Series

www.vido-europe.com

Preliminary

CONTENTS

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR
OTHER OPENINGSON THE EQUIPMENT.

FCC COMPLIANCE STATEMENT

CE COMPLIANCE STATEMENT

CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FORCOMPLIANCE COULD VOIDTHE USERS‘S AUTHORITY TO OPERATE THE
EQUIPMENT.

FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE
LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE
LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL
INTERFERENCE WHEN THE EQUIPMENT IS OPERATED INA COMMERCIAL ENVIRONMENT. THIS
EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT
INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE
HARMFUL INTERFERENCE TO RADIOCOMMUNICATIONS. OPERATION OFTHIS EQUIPMENT IN A
RESIDENTIAL AREA IS LIKELYTO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER
WILL BE REQUIREDTO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

WARNING: THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS
PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER MAY BE
REQUIRED TO TAKE ADEQUATE MEASURES.

CAUTION: TO REDUCETHE RISK

OF ELECTRICSHOCK, DO NOT

REMOVE COVER( OR BACK).NO

USER SERVICEABLEPARTS

INSIDE. REFERSERVICING TO

QUALIFIED SERVICE

PERSONNEL

This symbolindicates that dangerous
voltage constitutinga risk ofelectric
shock ispresent within thisunit.

This symbolindicates that thereare
important operatingand maintenance
instructions inthe literature
accompanying thisunit.

WARNING

CAUTION: BEFOREATTEMPTING TO CONNECTOR OPERATE THIS PRODUCT, PLEASE
READ THE LABEL ON THE BOTTOM AND USER'S MANUAL CAREFULLY

1. Precaution......................................................1

2. Features.........................................................2

3. Packing list.....................................................3

4. Installation...................................................... 4

5. Operation........................................................10

6. OSD................................................................11

7. Adress and Protocol Setting...............................19

8. Specifications..................................................23

Technical specification are subjects to change without
prior notice. Manual may contain mistake or print error.
All trademarks mentioned belong to their respective owners.

ENGLISH

1.PRECAUTION

Refer all work related to the installaion of this product to qualifiedservice
personnel or system installers.

Do not attemp to disassemble the appliance

Handle the appliance with Care

Do not use strong or abrasive detergents whencleaning the appliance body and
transparent cover.

Do not operate the apliance beyond its specified temperature, humidity or power
source ratings.

Do not point the camera lens directly to sunlight or any stronglight source.

Read this user's manual carefully before operating the appliance.

Do not install the camera in other orientation as designed.

Do not touch the Cover with bare hands or any object.

To prevent electric shock, do not remove screws or cover. There are no user­serviceable parts inside. Contact qualified service personnel for maintenance

Do not strike or shake, as this may damage the appliance. Itshould be protected
against extreme pressure, vibration and humidity during transportation and storage.
Damages caused by improper transportation avoid the warranty.

Use a dry cloth to clean the appliance when it is dirty. When the dirt is hardto remove,
use a mild detergent and wipe gently.

Do not use the dome camera in an extreme environment where hightemperature or
high humidity exists.

Take immediate action when the indoor speed dome becomes wet. Turn off the power
and refer servicing to qulified service personnel. Moisture may damage the appliance
and cause eletric shock.

This will cause permanent damage to the cameraand avoids the warranty.

Make sure that local electric safty standard are followed when using orinstalling the
appliance

And do not bend or squeez the sturctiure, as this may damagethe mechanic sturcture
of the appliance and avoids the warranty.

These will scratch the serface and affect the image qulaity.

Use the within -20°C to +60°C(-4°F to 140°F) and a humidity below
90%. The input power source is 12V DC, 50/60Hz and requires 2000mA.

outdoor models

Do not expose the indoor model of dome camera to water ormoisture, not try to
operate it in wet areas.

2.FEATURES

The G35M are

The integrated, motorized pan-tilt mechanic allows user to point
the camera to any position( 360° horizontal and 120° vertical). This series can be
equipped with digital zoom camera modules, which provide zooming functon from 18 to
36 times (optical) and advanced image features.

- 360° Pan and 120° Tilt range ( )

- Support most well-known camera modules

- 128 preset points memory

- 4 pattern tours

-4Scantour

- Basic setup directly from Keyboard.

- Advanced setup through OSD (On Screen Display) menu.

- up to 24 privacy masking zones ( despends on camera module)

- 7 alarm input & 2 output(4input&1outputpre-wired)

- Multi-Protocol through Rs485 or coaxial cable.

- Dirction Indicator on screen

- Aluminum Alloy structure with high intensity and heat-sinking

- High-precision step-motor for flicker-less image during movement.

-Shock resistance up to 10G

Wide-Range voltage input tolerance from 9 to 15V DC

-HighResolution with 520TVL and Wide-Dynamic*

- Auto-Focus

- Auto-Iris

- Auto- Brightness control,

- Auto-Balance

- IR cutter control, Day-Night mode switching.

- Auto Slow-Shutter

-Optional WDR or Electronic Image Stabilzer*

depends on camera module type.

Key features:

Camera Features:

*

Temperature monitoring and protection

Other features:

- Alarm notification will be displayed once the inner temperature exceeds the limit

- In low temperature area, the dome camera will only start afterthe operation
temperature is reached.

- Cooling fan activity is managed by the CPU ( extends theduration)

- Proportional pan for Focus / Speed on different zoom factor.

- Auto-resuming user-defined action, such as tour, pattern or scan after selectable idle
time.

- Power-up Action activates tour or pattern by default.

mobile PTZ camera series designed for vehicle and outdoor video

surveillance application.

-30° to +90°

-

12

ENGLISH

Some productsmay not beavailable in yourcountry, pleasecontact our distributorfor more details Some productsmay not beavailable in yourcountry, please contact our distributorfor more details

3.PACKING LIST

Safety Instructions before starting

- Do not install and operate this appliance in a flammable and explosive environment.

- Make sure that the installation is done according to the local electricity safety regulation
of your country.
.

- Before installation and mentainence, make sure that the appliance is disconnected
from the power source.

- Do not use any power source other than 15V DC, inorder to prevent damages tothis
device. For details, please refer to the section "Precaution" in previous chapter for
more details.

- Handle the device during the installation carfully. Falls or extreme vibration may cause
irrepairable damages and avoid the warranty.

- Do not install or operate the appliance near any high-voltage devicesor high-voltage
cable. The safety distance should remain at least 50 m.

- To archive best image quality, its recommanded to use underground cable shielded with
steel tube. Do not install the cable without any protection.

- In a thunderstorm area or region with high inductive voltage, such as high voltage
transformer stations, it is necessary to use additional lighning-proof equipments or
lightning rob for protection.

- For outdoor installation, lightning-proof and grounding of the device should be
considered. Please refer to the industrial saftey regulation and request of your country
.

- Grounding of the appliance should consider anti-interference and fulfill the saftey
requirements. Do not connect the ground with short-circuited or other high-voltage
electric network.

- The resistance of down conductor should not exceed 4 Ohm, and its thickness should
be at least 25mm²

- This appliance has the lightning-proof function which can prevent damages caused by
high-voltage pulse, such as lightning strike below 1500.

- This appliance meets the Ip66 standard for water and dust proof. Do not install the in­door model for out-door application which is not designed with water protection.Make
sure that the installation is protected from long-time water-drop or spatter, which may
damage the appliance.

- Make sure that the enviroment of installation meets the requirement of the appliance,
such as holding the weight, enough spaces for bracket and power supply.

4.INSTALLATION

G35M

G35M
PTZ Camera

AU-G35M

USER'SMANUAL

www.vido-europe.com

Instruction and
operation manual
1 piece

Some modelsmay not beavailable in yourcountry, pleasecontact VIDO distributorfor more details

3

4

ENGLISH

Some productsmay not beavailable in yourcountry, pleasecontact our distributorfor more details

4.INSTALLATION

OpenthechassisofPTZ
camera withwrench. Fix the
base onthe vehicle with4
screws.

Installing G35M

Install thePTZ camera atthe top ofvehicle.

4.INSTALLATION

Connector description

The wiring cable of G35M series provides connectors for power supply, video andI/O
interface

Video output
BNC

Inner Conn: Signal +
Outer Conn: Ground

Video Output to monitor or DVR

Using optional accessories

The G35M series can be connected to various optional accessories through the
standard connector types, which simplifiy the cable handling and avoids possible
mistakes. All accessories are tested for max. compatibility and best performance.

DC 12V

Power input

AU-KB3N

3-Axis keyboard

controller

RS 485

Telemetriccontrol
camera setup

Monitor

BNC videoinput

DVR

Video signal

RS 485 cable

The telemetric control of the appliance uses Rs485 serial communication with half­duplex transmission technology.
Depends on the cable typeand baud rate, the transmission distance could vary. The
following table shows max. distances based on cable with 0,56mm (24AWG) twisted
pair:

2400 bps

1100 m

700m

4oom

4800 bps

1700m

9600 bps

19200 bps

Baud Rate

Max. Distance

Due theenvironmental interferences, suchas
eletromagnetic andinduction fields, ornumber of
connected applianceon the RS-485bus, the
transmission rangemay be less,e.g with cablethinner
than than 24AWG.

4.INSTALLATION

56

ENGLISH

KB3N

Power
Connector

RS485
Connector
RJ-11

Alarm I/O 1

RED: DC 12V +
BLACK: V -

To power supply

DC 12

Green:RS485+
Yellow:RS485-

To Keyboard or DVR decives for
telemetric control

RED: Alarm in 1
PINK: Alarm in 2
YELLOW:
GREEN:
BLACK: COM
WHITE: Alarm output - N.O
BLUE: Alarm output - N.C

Alarm in 3

Alarm in 4

I/O interface to additional alarm sensor
or control devices

Some productsmay not beavailable in yourcountry, pleasecontact our distributorfor more details Some productsmay not beavailable in yourcountry, pleasecontact our distributorfor more details

(power fromvehicle)