vidiline VIDI-AC-1C User Manual

Stand-alone Proximity Access Control

User Manual

INTRODUCTION

VIDI-AC-1C is a compact, waterproof stand-alone programmable access control system that provides
proximity entry for up to 2000 users. It uses Atmel microcontroller assures maximum performance in any
environment, and the low-power circuit makes its service life prolonged.
The product unique feature is simple in design, easy operation, and high reliability.

Features

 Waterproof, conform to IP66
 Read 125KHz EM&HID card
 One programmable relay operation
 Pulse mode, Latch mode
 Remote infrared programmer
 2000 users
 Card block enrolment
 Tri-colour LED status display
 Built in light dependent resistor (LDR) for anti tamper
 Buzzer for audible or silent mode
 Low temperature resistance (-40℃)

Specifications:

User Capacity

Card

2000

EM card

Operating Voltage

Idle Current

9~18V DC

＜40mA

Proximity Card Reader

Radio Technology

Read Range

EM

125KHz Proximity Card
3-10cm

Wiring Connections

Relay Output, Exit Button

Relay

Adjustable Relay Output Time
Lock Output Load

One (NO, NC, Common)

1-99 Seconds (5 seconds default)
2 Amp Maximum

Environment

Operating Temperature
Operating Humidity

Meets IP66

-40℃ ~60℃
20%RH-98%RH

Physical

Colour
Dimensions
Unit Weight
Shipping Weight

ABS Shell

Black
L103* W48 * H20 (mm)
100g
150g

Carton Inventory

INSTALLATION

 Remove the back cover from the unit
 Drill 2 holes(A,C) on the wall for the screws and one hole for the cable
 Knock the supplied rubber bungs to the screw holes(A,C)
 Fix the back cover firmly on the wall with 4 flat head screws
 Thread the cable through the cable hole(B)
 Attach the unit to the back cover

Wiring

Colour

Function

Notes

Red

Power +

9~18 Votes DC Regulated Power Input

Black

GND

Ground

White

NO

Normally Open Relay Output

Brown

COM

Common Connection for Relay Output

Green

NC

Normally closed Relay Output

Yellow

OPEN

Request to Exit input(REX)