Vidikron VL-26HD, VL-32HD User Manual

O W N E R ’ S O P E R A T I N G M A N U A L

VL-26HD and VL-32HD

HIGH DEFINITION FLAT PANEL LCD DISPLAYS

VERSION 2.3

ONE YEAR LIMITED WARRANTY

For LCD Displays

Congratulations on your purchase of a Vidikron video product and welcome to the Vidikron family! With proper installation, setup and care, you should enjoy many years of unparalleled video performance.

This is a LIMITED WARRANTY as defined in the Magnuson-Moss Warranty Act. Please read it carefully and retain it with your other important documents.

WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:

SERVICE LABOR: Vidikron will pay for service labor by a Vidikron Authorized Service Center when needed as a result of a manufacturing defect for a period of one (1) year from the effective date of delivery to the end user.

PARTS: Vidikron will provide new or rebuilt replacement parts for the parts that fail due to defects in materials or workmanship for a period of one (1) year from the effective date of delivery to the end user. Such replacement parts are then subsequently warranted for the remaining portion (if any) of the original warranty period.

WHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:

Image retention on LCD display panels is specifically excluded from coverage under this Limited Warranty. Image retention or staining of an image is the result of misuse of the product and therefore cannot be repaired under the terms of this Limited Warranty.

Normal viewing material such as television/satellite broadcasts, videotape or DVDs (not put into pause for extended periods of time) will not cause damage to your display under normal conditions. Many DVD players are also equipped with screen savers for this reason.

TO AVOID IMAGE RETENTION (Burn-in): Please ensure that still images are not left on your LCD display panel. Also ensure that images displayed in the 4:3 aspect ratio mode (black or gray stripes, but no picture information is present on the left and right edges of the screen) are used as infrequently as possible. This will prevent permanent retention on your LCD display panel, which can be seen permanently under certain conditions once burn-in has occurred.

The types of images to avoid include video games, still images and computer screens with stationary tool bars and icons. (This is why computers are equipped with screen savers – to prevent still images from burning into the monitor’s phosphors after being displayed continuously for an extended period of time).

This Limited Warranty only covers failure due to defects in materials and workmanship that occur during normal use and does not cover normal maintenance. This Limited Warranty does not cover cabinets or any appearance items; failure resulting from accident, misuse, abuse, neglect, mishandling, misapplication, faulty or improper installation or setup adjustments; improper maintenance, alteration, improper use of any input signal; damage due to lightning or power line surges, spikes and brownouts; damage that occurs during shipping or transit; or damage that is attributed to acts of God. In the case of remote control units, damage resulting from leaking, old, damaged or improper batteries is also excluded from coverage under this Limited Warranty.

CAUTION: THIS LIMITED WARRANTY ONLY COVERS VIDIKRON PRODUCTS PURCHASED FROM VIDIKRON AUTHORIZED DEALERS. ALL OTHER PRODUCTS ARE SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITED WARRANTY. MOREOVER, DAMAGE RESULTING DIRECTLY OR INDIRECTLY FROM IMPROPER INSTALLATION OR SETUP IS SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITED WARRANTY. IT IS IMPERATIVE THAT INSTALLATION AND SETUP WORK BE PERFORMED ONLY BY AN AUTHORIZED VIDIKRON DEALER TO PROTECT YOUR RIGHTS UNDER THIS WARRANTY. THIS WILL ALSO ENSURE THAT YOU ENJOY THE FINE PERFORMANCE OF WHICH YOUR VIDIKRON PRODUCT IS CAPABLE WHEN INSTALLED AND CALIBRATED BY VIDIKRON AUTHORIZED PERSONNEL.

Vidikron VL-26/VL-32 Owner’s Operating Manual

iii

RIGHTS, LIMITS AND EXCLUSIONS:

Vidikron limits its obligations under any implied warranties under state laws to a period not to exceed the warranty period. There are no express warranties. Vidikron also excludes any obligation on its part for incidental or consequential damages related to the failure of this product to function properly. Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages. So the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

EFFECTIVE WARRANTY DATE:

This warranty begins on the effective date of delivery to the end user. For your convenience, keep the original bill of sale as evidence of the purchase date.

IMPORTANT – WARRANTY REGISTRATION:

Please fill out and mail your warranty registration card. It is imperative that Vidikron knows how to reach you promptly if we should discover a safety problem or product update for which you must be notified.

CONTACT A VIDIKRON AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE:

Repairs made under the terms of this Limited Warranty covering your Vidikron video product will be performed at the location of the product, during usual working hours, providing location of product is within normal operating distance from a Vidikron Authorized Service Center. In some instances it may be necessary for the product to be returned to the Vidikron factory for repairs. If, solely in Vidikron’s judgment, location of product to be repaired is beyond normal operating distance of the closest Vidikron Authorized Service Center, or the repair requires the unit be returned to the Vidikron factory, it is the owner’s responsibility to arrange for shipment of the product for repair. These arrangements must be made through the selling Vidikron Dealer. If this is not possible, contact Vidikron directly for a Return Authorization number and shipping instructions. Vidikron will return product transportation prepaid in the United States, unless no product defect is discovered. In that instance, shipping costs will be the responsibility of the owner.

COPYRIGHT AND TRADEMARKS:

© Copyright 2007 Vidikron, a Runco International Company. This document contains proprietary information protected by copyright, trademark and other intellectual property laws. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer.

Vidikron, Vision, DVSI, Imagix, CineWide, AutoScope, V2 Aperture Control, CSMS and IntelliWide are trademarks of Runco, LLC. All other trademarks and registered trademarks used in this document are the property of their respective owners.

Vidikron products are manufactured under one or more of the following patents: US. Patent 6755540 and Other Patents Pending.

iv	Vidikron VL-26/VL-32 Owner’s Operating Manual

ADDITIONAL INFORMATION:

To locate the name and address of the nearest Vidikron Authorized Service Center, or for additional information about this Limited Warranty, please call or write:

VIDIKRON

Attn: Customer Service Department

2900 Faber Street

Union City, CA 94587

Ph: [phone]

Fax: [phone]

Toll Free: (888) 4VIDIKRON

VIDIKRON PRODUCT INFORMATION

RETAIN THIS INFORMATION FOR YOUR RECORDS

_________________________________________________________	________________________________________
Model Purchased	Date

____________________________________________________________________________________________________________

Serial Number

____________________________________________________________________________________________________________

Vidikron Authorized Dealer Name

____________________________________________________________________________________________________________

Address

____________________________________________	__________________	________________________
City	State/Province	Postal Code
____________________________________________	_________________________________________________________
Phone	Fax

Vidikron VL-26/VL-32 Owner’s Operating Manual

v

Safety Precautions

Thank you for your purchase of this quality Vidikron product! It has been designed to provide you with the quality of video that is expected in a home theater. For the best performance, please read this manual carefully as it is your guide through the menus and operation.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

To turn off main power, be sure to remove the plugs from power outlets. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

This equipment has been tested and found to comply with the limits for a Class ‘B’ digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Installation Manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference, in which case the user will be required to correct the interference at his own expense.

DOC Compliance Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Please read and follow the safety precautions listed below to ensure the equipment is free from damage, and to ensure that no injury will occur as a result of improper use.

•Do not insert any object, especially metal or liquids, into the LCD display.

•Do not place any objects containing water or any other liquid on top of the LCD display.

•Do not place the units in direct sunlight, near heaters or in extremely dusty or humid locations.

•Do not install this system outdoors or otherwise exposed to the elements.

•Do not place heavy objects on top of the LCD display.

•If the power cord is damaged or frayed in any way, electrical shock and/or fire may result. Do not place objects on the power cord, and keep the cord away from heat-emitting devices. Should the power cord become damaged in any way, please contact your Vidikron Dealer for a replacement cord.

•Do not remove the cover of the LCD display for any reason. If any problems arise with the unit, please contact a Vidikron Dealer or Vidikron for service. Removing the covers will void the warranty.

vi	Vidikron VL-26/VL-32 Owner’s Operating Manual

		1Table of Contents
ONE YEAR LIMITED WARRANTY ..............................................................................................		iii
Safety Precautions ...................................................................................................................		vi
1.	Introduction ........................................................................................................................	1
	About This Manual ............................................................................................................................................	1
	Target Audience.........................................................................................................................................	1
	If You Have Comments About This Manual... ..................................................................................	1
	Textual and Graphic Conventions .......................................................................................................	1
	Using This Manual .............................................................................................................................................	2
	Description, Features and Benefits .............................................................................................................	3
	Key Features and Benefits.......................................................................................................................	3
	Parts List .......................................................................................................................................................	4
2.	Controls and Functions ......................................................................................................	5
	DView at a Glance ..............................................................................................................................................	5
	Controls and Indicators ...........................................................................................................................	5
	Connectors ..................................................................................................................................................	6
	DView Remote Control ....................................................................................................................................	8
3.	Installation ........................................................................................................................	13
	Remote Control ................................................................................................................................................	13
	Battery Installation ..................................................................................................................................	13
	Notes on Remote Control Operation................................................................................................	13
	Quick Setup .......................................................................................................................................................	14
	Installation Considerations ..........................................................................................................................	15
	Wall-Mounting the DView ....................................................................................................................	15
	Ambient Light ...........................................................................................................................................	15
	Other Considerations .............................................................................................................................	15
	Connections to the DView ...........................................................................................................................	16
	Rear Connector Access ..........................................................................................................................	16
	Connecting the DView to Source Components ...........................................................................	16
	MONITOR OUT Connection..................................................................................................................	20
	Connecting Headphones......................................................................................................................	20
	RS-232 Controller Connection ............................................................................................................	21

Vidikron VL-26/VL-32 Owner’s Operating Manual

vii

4.	Operation ..........................................................................................................................	23
	Turning on the Power ....................................................................................................................................	23
	Changing the OSD Language .....................................................................................................................	23
	Setting the PC Display Properties ..............................................................................................................	23
	Using the On-Screen Menus ........................................................................................................................	24
	Main Menu ................................................................................................................................................	26
	Source .........................................................................................................................................................	26
	Aspect Ratio ..............................................................................................................................................	26
	Picture Adjust ...........................................................................................................................................	28
	Audio ...........................................................................................................................................................	33
	Channel ......................................................................................................................................................	34
	Timer.............................................................................................................................................................	34
	Setup ...........................................................................................................................................................	35
	ISF Calibration ..........................................................................................................................................	37
	Using Picture-In-Picture (PIP) ......................................................................................................................	40
	Changing the PIP Position ....................................................................................................................	41
	Changing the PIP Size ............................................................................................................................	42
	Changing the PIP Aspect Ratio ...........................................................................................................	42
	Changing the PIP Image Mode...........................................................................................................	42
	Swapping the Main and PIP Images .................................................................................................	43
	Swapping the Main and PIP Audio Programs ...............................................................................	43
	Stereo Sound/SAP ...........................................................................................................................................	44
5.	Maintenance and Troubleshooting ................................................................................	45
	Cleaning ..............................................................................................................................................................	45
	Cleaning the Display Panel Body and Remote Control..............................................................	45
	Cleaning the Screen................................................................................................................................	45
	Cleaning the Vents ..................................................................................................................................	45
	Troubleshooting Tips .....................................................................................................................................	45
6.	Serial Communications ....................................................................................................	47
	RS-232 Connection and Port Configuration ..........................................................................................	47
	Serial Command Syntax ................................................................................................................................	47
7.	Specifications ....................................................................................................................	51
	DView Specifications ......................................................................................................................................	51
	DView Dimensions ..........................................................................................................................................	52
	Computer/Video Signal Compatibility ....................................................................................................	54

viii	Vidikron VL-26/VL-32 Owner’s Operating Manual

1List of Figures

2-1. DView Controls and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2-2. DView Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2-3. DView Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3-1. Antenna/Cable TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 3-2. DVI Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 3-3. Analog RGB Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 3-4. Component Video Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 3-5. Composite and S-Video Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 3-6. Monitor Output Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 3-7. Connecting Headphones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 3-8. RS-232 Control System Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 4-1. DView OSD Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 4-2. Typical PLUGE Pattern for Adjusting Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 4-3. Typical Gray Bar Pattern for Adjusting Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint . . . . . . . . . . . . . . . . . . . . . . . . 30 4-5. Typical Test Pattern for Adjusting Sharpness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 4-6. DView Splash Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 7-1. VL-26 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 7-2. VL-32 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Vidikron VL-26/VL-32 Owner’s Operating Manual

ix

List of Figures

Notes:

x	Vidikron VL-26/VL-32 Owner’s Operating Manual

1Introduction

This Owner’s Manual describes how to install, set up and operate the Vidikron VL-26 and	1.1
VL-32 LCD Displays. Throughout this manual, the Vidikron VL-26 and VL-32 LCD Displays are	About This Manual
referred to simply as the “DView.”
Vidikron has prepared this manual to help home theater installers and end users get the	Target Audience
most out of the DView.
Vidikron has made every effort to ensure that this manual is accurate as of the date it was
printed. However, because of ongoing product improvements and customer feedback, it
may require updating from time to time. You can always find the latest version of this and
other Vidikron product manuals on-line, at www.vidikron.com.
Vidikron welcomes your comments about this manual. Send them to [e-mail].	If You Have Comments About
	This Manual...
Text Conventions: The following conventions are used in this manual, in order to clarify the	Textual and Graphic
information and instructions provided:	Conventions

•Remote control button identifiers are set in upper-case bold type; for example, “Press EXIT to return to the previous menu.”

•All keys with functional names are initial-capped, set in bold type and enclosed in angle brackets. These keys are the following: <Enter>, <Spacebar>, <Control>, <Esc> and <Tab>.

•<Enter> indicates that you may press either the RETURN or ENTER key on your computer keyboard if it has both keys.

•Computer input (commands you type) and output (responses that appear on-screen) is shown in monospace (fixed-width) type; for example: “To change the aspect ratio to Letterbox, type [S4E0002.”

In addition to these conventions, underlining, boldface and/or italics are occasionally used to highlight important information, as in this example:

A carriage return must be used after each command or string.

Note

Vidikron VL-26/VL-32 Owner’s Operating Manual

1

Introduction

Graphic Conventions: These symbols appear in numerous places throughout the manual, to emphasize points that you must keep in mind to avoid problems with your equipment or injury:

TIPS highlight time-saving short cuts and helpful guidelines for using

Tip	certain features.

NOTES emphasize text with unusual importance or special significance.

	Note	They also provide supplemental information.
	Caution	CAUTIONS alert users that a given action or omitted action can degrade
		performance or cause a malfunction.

WARNINGS appear when a given action or omitted action can result in

WARNING damage to the equipment, or possible non-fatal injury to the user.

DANGER appears when a given action can cause severe injury or death.

DANGER!

1.2

Using This Manual

Use the following table to locate the specific information you need in this manual.

If you need...	... Turn to page:
Information about obtaining service	iv
General information about the VL-26 and VL-32	3
LCD Displays
Installation instructions	13
First-time configuration instructions	23
Advanced configuration instructions	37
Troubleshooting tips	45
Specifications for the VL-26 and VL-32 LCD Displays	51

2	Vidikron VL-26/VL-32 Owner’s Operating Manual

Introduction

Vidikron presents the high performance DView™ Series VL-26 and VL-32 LCD Displays, perfect for those who demand our award-winning flat panel performance in a more intimate size than we offer with our larger plasma monitors. The new DView™ high definition capable LCD displays are ideal for close-in viewing where picture quality remains a high priority, but larger displays cannot be accommodated.

The DView™ Series VL-26 and VL-32 LCD Displays incorporate the superb Imagix™ digital video processing that produces outstanding picture quality with a wide range of both standard and high definition source material. In addition, the handsome, pewter-finish television is engineered with ISF™ calibration standards for the purest video performance.

The VL-26 and VL-32 LCD Displays also feature a built-in ATSC tuner that receives terrestrial DTV broadcasts, in addition to an advanced, 185 channel, cable-ready NTSC stereo tuner. The DView offers PIP, PBP, closed captioning, Parental Control (V-Chip) functionality and multi-language support. The display includes an integrated stereo audio system incorporating surround sound technology with two-way speakers and generous power amplification.

The advanced TFT active-matrix LCD display panel offers 1366 x 768 resolution and includes Vidikron’s discrete aspect ratio control with IntelliWide™ mode to fill the 16:9 screen with standard 4:3 images without loss of picture quality. Also included are discrete source, aspect ratio and power selection and an RS-232 interface for whole house or automated control system integration.

The DView is multimedia ready, with simple computer connections making gaming, Internet browsing and other computer activities quick and easy.

The DView offers these key features and benefits:

•Native Resolution: 1366 x 768 (16:9 Native Aspect Ratio)

•Multiple Aspect Ratios with IntelliWide™ Mode

•Less than 4 inches thin

•DVI Input with High-bandwidth Digital Content Protection (HDCP)

•Built-in HDTV Tuner

•Exceptional detail and artifact-free video enhancement

•Vidikron video processing with 3:2 film detection circuitry

1.3

Description, Features and Benefits

Key Features and Benefits

Vidikron VL-26/VL-32 Owner’s Operating Manual

3

Introduction

Parts List Your DView is shipped with the following items. If any items are missing or damaged, please contact your Vidikron dealer or Vidikron Customer Service at (888) 4VIDIKRON.

•VL-26 or VL-32 LCD Display (with Table Stand)

•Remote Control Unit and two (2), AAA-size batteries

•AC Power Cord

•Warranty information and registration card

•Vidikron VL-26/VL-32 Owner’s Operating Manual (this document)

Optional Accessories:

• Wall Mount kit

4	Vidikron VL-26/VL-32 Owner’s Operating Manual

2Controls and Functions

Figure 2-1 and Figure 2-2 show the locations of the DView controls, indicators and connectors.

Right Side
TV/AV	1
	2
8
	3

5

4

6

7

2.1

DView at a Glance

Controls and Indicators

Figure 2-1. DView Controls and Indicators

1.TV/AV Button (Input Source Selection)

2.MENU Selection Button

3.Volume Adjustment Buttons

4.Channel Selection Buttons

5.Remote Control Sensor

6.Power Indicator

Lights red to indicate that the DView is in standby mode; lights green to indicate normal operation; flashes green when the DView receives a signal from the remote control.

7.Power Button

8.Speakers

Vidikron VL-26/VL-32 Owner’s Operating Manual

5

Controls and Functions

Connectors

Left Side

Right Side

	INPUT2
VIDEO	1
S-
Audio R	2
L
VIDEO	3
	4

Rear

5

6

7

8

9

18

19

	SERVICE		17
			16
	MONITOR-OUT	INPUT1	15
			14
			13
	INPUT3		12
			11
	ANT		10

Figure 2-2. DView Connectors

1.INPUT 2 S-Video Input

Standard S-Video input for connecting a DVD player, satellite receiver or Super VHS (S-VHS) VCR.

2.INPUT 2 Audio Input

3.INPUT 2 Composite Video Input

Standard composite video input for connecting a VCR, camcorder, laser disc player or other composite video source.

4.Headphone Jack

5.Main Power Switch (VL-32 only)

6.Power Input (100 to 240 VAC)

Connect the DView to power here.

7.RGB HD

A 15-pin VGA connection to a personal computer. The DView automatically detects the signal resolution: 480i, 480p, 576i, 576p, 720p or 1080i.

8.DVI/Computer Input (Digital)

HDCP-compliant digital video input for connecting a DVD player, personal computer or HD tuner with a DVI or HDMI output.

For best results, do not run your DVD player in progressive mode.

Tip

6	Vidikron VL-26/VL-32 Owner’s Operating Manual

Controls and Functions

9.Audio Input (RGB/DVI)

Connect the audio output from your RGB or DVI source here.

10.ATSC DTV Input

75-ohm coaxial input for connecting a TV antenna or CATV system to the digital TV tuner.

11.INPUT 3 Component Video (RCA connectors)

Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component input. This is the input for component video from sources such as DVD players.

12.INPUT 3 Composite Video Input

13.INPUT 3 Audio Input

Connect the audio output from your Input 3 source here.

14.INPUT 1 COMPOSITE VIDEO INPUT

15.INPUT 1 Audio Input

Connect the audio output from your Input 1 source here.

16.INPUT1 S-Video Input

17.RS-232 CONTROL PORT

A male, 9-pin D-sub connector for interfacing with a PC or home theater automation/control system.

18.MONITOR-OUT (Audio)

19.MONITOR-OUT (Composite Video)

Vidikron VL-26/VL-32 Owner’s Operating Manual

7

Controls and Functions

2.2

DView Remote Control

Figure 2-3 shows the DView remote control, and the paragraphs that follow describe its functionality.

1	OFF									ON
	1				2					3
2	4				5					6
	7				8					9
	100				0					_
		SOURCE								SLEEP
	INPUT	INPUT				INPUT				TIMER	3
	1	2			3					OFF
4
	DVI			RGB						TV
					HD
				MEMORY
	CUST				ISF					ISF	5
					NT					DAY
			ASPECT RATIO
6	ANA		4X3			LET				I-WIDE
						BOX
						CH
	VOL -			ENTER						VOL +	7
8	MENU					CH				EXIT	9
	ASPECT		SIZE			POSITION				PIP
10	P.MODE	S.SWAP				SWAP				TV/AV
	S.MODE	SURRND				MTS/SAP				MUTE	11

12

FC1

FC2

FC3

FC4

Figure 2-3. DView Remote Control

8	Vidikron VL-26/VL-32 Owner’s Operating Manual

Controls and Functions

1.OFF / ON

Use these buttons to turn the DView on or off.

2.Numeric Buttons

Use these buttons to enter TV channel numbers or menu pass codes. Use the 100 button to enter channel numbers above 99. Use the - button to enter DTV sub-channel numbers.

3.TIMER OFF Button

Press this button to set the sleep timer. Press it repeatedly to scroll through the available options (Off, 10, 30, 60, 120 or 180 minutes).

4.Source Selection Buttons:

INPUT 1

Press this button to switch to Input 1.

INPUT 2

Press this button to switch to Input 2.

INPUT 3

Press this button to switch to Input 3.

DVI

Press this button to switch to the Digital Video input.

RGB HD

Press this button to switch to the RGB HD input.

TV

Press this button to switch to the Antenna/DTV/CATV input.

Note	Input 1 and Input 2 have both S-Video and composite video connectors.
	Input 3 has both component and composite video connectors.

To specify which connection type you are using – or to switch from one to the other if equipment is connected to both – use the Input Selection menu under Setup (refer to Input Selection on page 37).

5.Memory Preset Buttons:

CUST

Press to recall settings for the current input from the “Custom” memory preset.

ISF NT (Night)

Press to recall settings for the current input from the “ISF Night” memory preset.

ISF DAY

Press to recall settings for the current input from the “ISF Day” memory preset.

Vidikron VL-26/VL-32 Owner’s Operating Manual

9

Controls and Functions

6.Aspect Ratio Selection Buttons:

ANA (Anamorphic)

For 16:9 DVDs or HDTV program material.

4X3 (Standard 4:3)

The input signal is scaled to fit 4:3 display mode in the center of the screen.

LETBOX (Letterbox)

Image in letterbox format is enlarged to fit 16:9 full screen display and the upper/lower portions are “blanked off.”

I-WIDE (IntelliWide)

4:3 image is enlarged NON-linearly in horizontal direction to fit 16:9 full screen display.

7.Arrow Buttons (, ,, )

Use these buttons to select items or settings, adjust settings, change TV channels or adjust sound volume.

ENTER

Press to select a highlighted menu item or confirm a changed setting.

8.MENU

Press this button to access the on-screen display (OSD) controls, or to exit the current menu and return to the previous one.

9.EXIT

Press this button to hide the OSD controls, or display program information (when available) if the OSD controls are already hidden.

10.Picture-In-Picture (PIP) Function Buttons

ASPECT

Press to change the aspect ratio of the PIP window from 4:3 to 16:9 or vice versa.

SIZE

Press to choose from three PIP window sizes.

POSITION

Press to choose the PIP window position (top left, top right, bottom left or bottom right corner).

PIP

Press to change the PIP mode (picture-in-picture, picture-by-picture or off).

P.MODE

Press to recall settings for the PIP input from either the “ISF Night” or “ISF Day” memory preset.

S.SWAP

Press to switch between the main and PIP audio programs.

SWAP

Press to swap the main and PIP windows.

TV/AV

Press to switch to a different PIP video source.

10	Vidikron VL-26/VL-32 Owner’s Operating Manual