Vidifox i3030 User Manual
1
i3030
Document Camera
USER MANUAL
Please read this manual carefully before operating the document camera and keep it for reference
2
PRECAUTIONS
NOTICES: PLEASE READ CAREFULLY BEFORE USE
u Use the document camera under the rated electric conditions.
u Do not place the document camera on any unstable surface. It may fall and cause injures
or damages.
u Do not place this device directly under sunlight or near heaters.
u Do not place this device near water.
u Keep the camera away from acid or alkali gas.
u Do not place this document camera in humid, dusty, windy or vibrant locations.
u The recommended operating environment is:
Temperature: 0ºC--45ºC(32ºF-113ºF)
Humidity: less than 75%
u Always unplug BEFORE cleaning the device. Use a damp soft-cloth for cleaning. Do not
use volatile solvent.
u When this equipment functions abnormally, such as smoke, smell, noise, immediately
unplug and call for professional assistance.
u Unplug the document camera or shut off the power when not in use.
3
CONTENTS:
USER MANUAL....................................................................................1
1. PARTS IDENTIFICATION..............................................................5
2. CONTROL PANEL...........................................................................6
3. INPUTS AND OUTPUTS..................................................................7
4. REMOTE CONTROL.......................................................................8
5. CONNECTIONS................................................................................9
5.1. COMPUTER CONNECTION...........................................................................................9
5.2. VGA OUTPUT CONNECTION......................................................................................10
5.3. C-VIDEO OUTPUT CONNECTION..............................................................................10
5.4. S-VIDEO OUTPUT CONNECTION..............................................................................11
6. RS232 SOFTWARE.........................................................................11
6.1 COMPUTER REQUIREMENTS.....................................................................................11
6.2. SOFTWARE INSTALLATION.......................................................................................11
6.3 SOFTWARE START AND SETTING.............................................................................14
6.4. BUTTON INSTRUCTION..............................................................................................16
7. USB FUNCTION.............................................................................17
7.1 COMPUTER REQUIREMENTS.....................................................................................17
7.2 PREPARATION FOR INSTALLATION..........................................................................18
7.3 SOFTWARE INSTALLATION........................................................................................21
7.4 SOFTWARE START........................................................................................................25
7.5 IMAGE CAPTURE AND VIDEO RECORDING...........................................................26
7.6 SETTING..........................................................................................................................27
8. FEATURES......................................................................................28
LIGHT....................................................................................................................................28
ZOOM IN AND ZOOM OUT................................................................................................28
FOCUS ADJUSTMENT.........................................................................................................28
BRIGHTNESS ADJUSTMENT.............................................................................................28
WHITE BALANCE ADJUSTMENT.....................................................................................29
TEXT/PICTURE MODE........................................................................................................29
IMAGE FREEZE....................................................................................................................29
IMAGE MIRROR...................................................................................................................29
SPLIT SCREEN.....................................................................................................................29
IMAGE SAVE........................................................................................................................29
4
IMAGE RECALL...................................................................................................................29
MULTIPLE INPUTS AND OUTPUTS..................................................................................30
USB 2.0 PORT........................................................................................................................30
USB IMAGE CAPTURE AND VIDEO RECORDING.........................................................30
RS232 CONTROL..................................................................................................................30
9. SPECIFICATION............................................................................31
10. TROUBLE-SHOOTING:..............................................................32
11. PACKING LIST.............................................................................32
5
1. PARTS IDENTIFICATION
1. Remote control IR receiver
2. Camera
3. LED light box
4. Upper mechanical arm
5. Main mechanical arm
6. Side panel
7. Back panel
8. Base unit
9. Control panel
6
2. CONTROL PANEL
1. POWER: Turn on/off the power.
2. HOME: Activate VGA output terminal, providing the image from camera.
3. LAMP: Turn on/off the LED light.
4. FREEZE: Freeze/unfreeze the image.
5.T/P: Switch the output image between text mode and picture mode.
6. SPLIT: Split screen, enable the comparison between the frozen image and live image.
7. COMPUTER: Activate the VGA input.
8. VIDEO: Activate the C-VIDEO&S-VIDEO output, providing the image from camera.
9. BRIGHT+/-: Image brightness control.
10.PAGE DOWN: Saved image page down when image recall mode is enabled.
11. AUTO: Carry out auto focus, color adjustment and white balance.
12. SAVE: Capture and save the current image.
13. RECAL: Image recall mode enabled, display the saved images.
14. FOCUS+/-: Adjust focus manually, focus far and focus near.
15. ZOOM+/-: Image zoom in and zoom out control.
In image recall mode:
1: Display the first image.
2: Display the second image.
3: Display the third image.
4: Display the fourth image.
7
3. INPUTS AND OUTPUTS
1. DC 12V: Power input.
2. RS 232: Serial port, to control the document camera by computer via this port.
3. AUDIO OUT: Audio output.
4. VGA OUT: VGA(RGB) signal output(15 pin D-SUB).
5. C-VIDEO: Composite video output.
6. S-VIDEO: S-Video output.
7. VGA IN: VGA(RGB) signal input(15 pin D-SUB).
8. AUDIO IN: Audio input.
9. USB: Capture image into a connected computer via provided software
8
4. REMOTE CONTROL
1. Save: Capture the image in display.
2. Recall: Image recall mode enabled, display the saved images.
3. Lamp: Toggle arm light, back light & no light.
4. Split: Split screen, enable the comparison between the frozen image and live image.
5. Page down: Saved image page down when image recall mode is enabled.
6. Mirror: Output right-and-left, up-and-down mirror image.
7. Freeze: Freeze/unfreeze the image.
8. T/P: Switch the output image between text mode and picture mode.
9. Red+/-: Image chroma control (red).
10. Blue+/-: Image chroma control (blue).
11. SXGA/XGA: Switch the output signal between XGA and SXGA. (available for the model
i3130).
12. Home: Activate VGA output terminal, providing the image from camera.
13. Sharp+/-: Image sharpness control.
9
14. Auto: Carry out auto focus, color adjustment and white balance.
15. Computer: Activate the VGA input.
16. Video: Activate the VIDEO&S-VIDEO output, providing the image from camera.
17. Zoom+/-: Image zoom in and zoom out control.
18. Focus+/-: Adjust focus manually, focus far and focus near.
19. Bright+/-: Image brightness control.
In image recall mode:
1: Display the first image.
2: Display the second image.
3: Display the third image.
4: Display the fourth image.
5. CONNECTIONS
5.1. COMPUTER CONNECTION
To RGB Output
USB
Audio Cable
To Audio Output
RS232 cable
To RS232
10
5.2. VGA OUTPUT CONNECTION
To RGB Input
To Audio Input
5.3. C-VIDEO OUTPUT CONNECTION
Loading...