Videx KRV98, KRV96 Connections

66250905-EN - V1.0 - 06/02/14

1

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

112 42

155

182

29

LAN

+12Vdc

GND

Made in Italy

KRV98
KRV96

/W (white)
/B (black)

H

L

CAN BUS

Fig. 1 KRV96

120

190

839

189

119

LAN

+12Vdc

GND

Made in Italy

KRV98
KRV96

/W (white)
/B (black)

H

L

CAN BUS

Fig. 2 KRV98

DESCRIPTION

• Kristallo design with touch sensitive buttons;

• 3.5” LCD TFT High Denition Display

• Available in a ush mounting (handsfree) version or surface mount version with handset (for handsfree or conventional). A desk
mount kit is available for the surface with handset version,

• 10/100 Mbit Ethernet interface;

• PoE or 12Vdc power supply;

• Compatible with the SIP protocol (it can be connected with VOIP switchboard systems);

• Built in web server to set operation parameters;

• Firmware can be updated through a web server;

• Self search function and self setting of Videx IP devices connected on the same network;

• Integrated picture memory facility with automatic capture;

• Privacy function with programmable activation time from 30 min to 24 h or unlimited;

• History of events;

Art.KRV98-KRV96 3.5" IP Videointercom

Connection

66250905-EN - V1.0 - 06/02/14

2

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

• Intercommunication with other devices of the system (outdoor stations, videophones, tablet or PC with client installed) user can
be selected through a complete contacts list or through “favorites” (communication with outdoor stations is audio/video and it’s
possible to activate the relays);

• It is possible to activate the relays of the outdoor stations through a menu option;

• “Weather forecast” function through google weather service (an internet connection to the network is required);

• Melody and desktop can be customized by loading audio les and pictures.

BUTTONS OPERATION IN STANDBY MODE

With the video intercom in stand-by and the monitor switched o, press any button to switch on.

RAPID CALL BUTTON

By pressing this button you access directly into the “rapid call” submenu. If the list includes one contact only
the call starts directly.

LOCKS

By pressing this button you access directly into the “locks” menu (See LOCKS paragraph in Graphic Interface section).

PRIVACY FUNCTION

By pressing this button you enable the privacy service (the relevant LED switches on) and the videointercom
receives incoming calls but doesn’t switch on the audio or the video connection.
The service is disabled by the privacy time expiring or by pressing the same button again.

MENU NAVIGATION BUTTON

If the videointercom is in stand-by but the monitor is switched o, rst press any button to switch on the display.

or

With the videointercom in stand by and switched on it selects the previous menu icon

or

With the videointercom in stand by and switched on it selects the next menu icon

With the videointercom in stand by and switched on it enters in the currently selected menu icon

TERMINALS

L

Not used

H

LAN 10/100Mb Ethernet Interface RJ45 plug

+12Vdc 12Vdc - 500mA Power Supply Input

0Vdc Ground

TECHNICAL SPECIFICATION

• Power supply voltage: 12Vdc

• Power consumption: 500mA max

• Working temperature: -10° +50° C

IP VIDEOINTERCOM RESTORE TO FACTORY PRESET

To restore the settings to the factory preset proceed as follows:

1. Power down the video intercom (disconnect the power sup­ply connector or in case of POE switch/router disconnect the
Ethernet cable);

2. On the rear side of the video intercom, on the 28 way con­nector, put in short the two terminals as shown in Fig. 3;

3. Power on the video intercom and wait for the boot;

4. Remove the link when the video intercom emits an acoustic signal;

5. Once the boot is complete the video intercom is ready to work;

The video intercom settings are restored to the following:

Network Parameters

IP Address: 192.168.1.4
Net Mask: 255.255.255.0
Gateway: 192.168.1.1
DNS Server: 8.8.8.8

Login Credentials

Username: admin
Password: admin

Advanced Setup Password

Password: 0000

14
13
12
11
10

9
8

7
6

5
4
3
2
1

28
27
26
25
24
23
22
21
20
19
18
17
16
15

RESET
BUTTON

Fig. 3

Art.KRV98-KRV96 3.5" IP Videointercom

Connection

66250905-EN - V1.0 - 06/02/14

3

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

IP VIDEO INTERCOM MANUAL RESET

In case the system locks (touch sensitive buttons not recognized) you can reset manually the video intercom:

1. On the rear side of the video intercom, under the 28 way connector there is a small button see Fig. 3;

2. Using a thickness tool, press shortly the button and wait for the video intercom reboot;

3. Once the boot is complete the video intercom is ready to work;

This procedure reboots only the video intercom without aect any setting.

POWER SUPPLY & CONNECTION

In case of POE (Power Over Ethernet) Switch/Router, follow the connection shown in Fig. 4 otherwise, in case of standard Switch/
Router, follow the connection shown in gure Fig. 5.

LAN

+12Vdc

GND

Made in Italy

KRV98
KRV96

/W (white)
/B (black)

H

L

CAN BUS

LAN

+12Vdc

GND

Made in Italy

KRV98
KRV96

/W (white)
/B (black)

H

L

CAN BUS

Connect to a POE (Power Over
Ethernet) Switch or Router

Connect to a POE (Power Over
Ethernet) Switch or Router

Fig. 4

LAN

+12Vdc

GND

Made in Italy

KRV98
KRV96

/W (white)
/B (black)

H

L

CAN BUS

LAN

+12Vdc

GND

Made in Italy

KRV98
KRV96

/W (white)
/B (black)

H

L

CAN BUS

230V

12Vdc

Art.AMR2-12

or

12Vdc 2A

PSU

230V

12Vdc

Art.AMR2-12

or

12Vdc 2A

PSU

Connect to a Switch,
Router or directly** to the
ethernet interface of the
Art.4503

Connect to door panel's
power supply unit*

Connect to a Switch,
Router or directly** to the
ethernet interface of the
Art.4503

Connect to door panel's
power supply unit*

To Art.4503

To Art.4503

Fig. 5

* When the devices are connected directly certain features which require the internet will not be available.
** If the videointercom is not connected to a POE switch or router, it is necessary to connect an external PSU (terminals “+12Vdc” & “GND”). If the videointercom is provided in a video kit, you can use

the PSU included in the video kit. For distances between the videointercom and the PSU up to 25 metres use 2 cables 1.0mm2 (AWG17).

Connection

Art.KRV98-KRV96 3.5" IP Videointercom

66250905-EN - V1.0 - 06/02/14

4

HARDWARE SETUP WITH CROSSOVER CABLE

Power up the Art.KRV98/96 and connect a crossover cable between the PC/Laptops network connection and the Art.KRV98/96
network connection (TCP/IP) as shown in Fig. 1.

HARDWARE SET UP WITH SWITCH AND PATCH CABLE

Power up the Art.KRV98/96 and connect a patch cable between the Art.KRV98/96 network connection (TCP/IP) and the Switch and
then connect a patch Ethernet cable between the PC/Laptops network connection and the Switch as shown in Fig. 2.

2

AMR2-12

12Vdc Power supply

Crossover cable

PC/Laptop

Art.KRV96/98

IP videophone

Fig. 1

2

Standard or

Wi-Fi Router

AMR2-12

12Vdc Power supply

Patch
Ethernet cable

Patch
Ethernet cable

PC/Laptop

Art.KRV96/98

IP videophone

Fig. 2

HARDWARE SET UP NOTES

These rst steps simply put your PC/laptop into the same IP range as the default Art.KRV98/96. There are many ways to reach the
“Local area connections” window depending on your windows set up. These steps present one of them (also see appendix for Win­dows Vista/Windows 2000/XP).

First click on the start menus Windows icon in the bottom left of the screen and select
“Control Panel” from the list on the right hand-side as shown in Fig. 3.

Fig. 3

Art.KRV98-KRV96 Hardware setup

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

66250905-EN - V1.0 - 06/02/14

5

The “Control Panel” window shown in Fig. 4 will appear. Click on
“Network and Sharing Center” option.

The window shown in Fig. 5 will appear. Select “Change adaptor
settings” option on the left hand-side.

The window shown in Fig. 6 will appear. Double click on the “Lo­cal Area Connection” icon.

Fig. 4

Fig. 5

Fig. 6

Art.KRV98-KRV96 Hardware setup

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

66250905-EN - V1.0 - 06/02/14

6

The “Local Area Connection Status” window shown in Fig. 7 will
appear. Click on the “Properties” button.

The “Local Area Connection Properties” window shown in Fig.
8 will appear. Highlight “Internet Protocol Version 4 (TCP/IPv4)”
from the list then click on the “Properties” button.

Fig. 7

Fig. 8

Art.KRV98-KRV96 Hardware setup

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

66250905-EN - V1.0 - 06/02/14

7

The “Internet Protocol Version 4 (TCP/IPv4) Properties” window shown in Fig. 9 will appear. Before changing settings in this window
rst make a note of the current IP Address, Subnet mask and default gateway settings as you will need to restore them once the task
is complete. Select “Use the following IP address:” and complete the following details as highlighted.

Use the following IP address:
IP address: 192.168.1.150
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1

Fig. 9

IMPORTANT NOTE!

The default IP address of the Art.KRV98/96 is preset as “192.168.1.4”. When entering the information in the “Internet Proto­col Version 4 (TCP/IPv4) Properties” window (as shown above) the IP address that is entered must be within the same range
as the default IP address “192.168.1.4” in this example we are using “192.168.1.150”. The range of IP addresses can be be­tween 1 to 255. Only the last set of digits of the IP address needs to be changed “192.168.1.n” where n = 1 to 255.

After completing the details (as shown above) click on “OK” and close all windows and exit “Control Panel”.
Your PC/laptop is now ready to change the Art.KRV98/96 default IP address to one suitable for your network.

Repeat these steps later to restore your PC/laptop back to its original settings.

Next click on the internet browser icon on your desktop and enter the following web address “http://192.168.1.4/” as shown then press enter.

NETWORK PARAMETERS CHANGES

Fig. 10 Fig. 11

The “LOGIN” web page shown on Fig. 10 should appear. Enter the default Username (in lower case) and Password then click on the
“Login” button.

Art.KRV98-KRV96 Hardware setup

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

66250905-EN - V1.0 - 06/02/14

8

The “Art.KRV98/96 Network Parameters” web page should appear as shown in Fig. 11.
The IP Address, SubnetMask and Gateway IP can now be changed. This information can be obtained from the network administrator.
Once all details have been updated on the “Art.KRV98/96 Network Parameters” web page press the “Congure” button followed by
“Apply conguration”.

IMPORTANT NOTE!

Once you change the IP address you may not be able to connect using the PC/Laptop without repeating the previous steps
to make the PC/Laptop part of the same subnet as the device.

APPENDIX

WINDOWS VISTA

1. Open the start menu from the Windows icon in the bottom left of the screen and select “control panel” from the list on the right
hand-side.

2. Select the option “View network status and tasks”.

3. Select “Manage network connections”.

4. Double click on “Local Area Connection”.

5. Select the button “Properties” at the bottom of the window.

6. Select “Internet Protocol Version 4 (TCP/IPv4)” from the list, then select “Properties”.

7. Before changing any settings in this window rst make a note of the current IP Address, Subnet mask and default gateway set­tings as you will need to restore them once the task is complete.

8. Complete the information as described on page 6.

9. After completing the details click on “OK” and close all windows and exit “control panel”.

10. Your PC/Laptop is now ready to change the Art.KRV98/96 default IP address to one suitable for your network.

11. Follow the steps as described on section “Network parameters changes” on page 7 to change the IP address of the Art.
KRV98/96.

WINDOWS 2000/XP

1. Open the start menu from the Windows icon in the bottom left of the screen and select “control panel”.

2. In the “control panel” window double-click on the “Network and Dial-Up” connections icon.

3. Click on “Local Area Connection” to bring up a “local area network status” window.

4. In the “components checked are used by this connection” area, highlight “Internet Protocol (TCP/IP)” and click on the “Properties”
button.

5. The Internet Protocol (TCP/IP) properties window will appear.

6. Before changing any settings in this window rst make a note of the current IP Address, Subnet

7. mask and default gateway settings as you will need to restore them once the task is complete.

8. Complete the information as described on page 6.

9. After completing the details click on “OK” and close all windows and exit “control panel”.

10. Your PC/Laptop is now ready to change the Art.KRV98/96 default IP address to one suitable for your network.

11. Follow the steps as described on section “Network parameters changes” on page 7 to change the IP address of the Art.
KRV98/96.

Art.KRV98-KRV96 Hardware setup

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

66250905-EN - V1.0 - 06/02/14

9

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

LOGIN

It is recommended that this device is installed by an engineer
with an understanding of Ethernet installations and TCP/IP
protocols. In the case of installations using existing networks it
maybe necessary to request information from the network ad­ministrator.
More than one unit can be installed on a system. Each unit must
have a unique IP address which is not currently in use on that
network.
The default network parameters are:

• Static IP Address: 192.168.1.4*

• Subnet mask: 255.255.255.0

• User Name: admin

• Password: admin

* If the videointercom is provided in a two way videokit the default ip address for the “videointercom 1” is “192.168.1.4” while for
the “videointercom 2” is “192.168.1.5”.
If the default IP address on the device is free and in range with your network then, from a PC, tablet or smartphone connected to
the same network, open a browser and enter the URL “http://192.168.1.4”.
Alternatively if the default IP address is not compatible with your network it will be necessary to change this rst. A guide to this
can be found under the “Art.KRV98-KRV96 Hardware setup” section on page 4. The internal webserver will show the login page
of Fig. 1
Enter the user name and password then start to setup the IP Videointercom through the dierent tabs.
In case of problems or mistakes, the videointercom can be restored to the factory preset following the procedure described in the
“IP videointercom restore to factory preset” section on page 2

NETWORK PARAMETERS

This tab allows the editing of all network parameters Fig. 2.

NETWORK CONFIGURATION

“Enable DHCP Client” allows the unit to obtain a dynamic IP ad­dress from the network. It is better to leave it disabled and use
a xed IP address.
Edit the elds of the subsection “Network conguration” (Refer
“Network conguration” sections on page 19 and 13 of this
manual) according to the network requirements then press the
“Congure” button followed by “Apply conguration”.
A short countdown signals that the device is updating the
changes.

NETWORK CONTROL

“Enable Check Alive” enables the device to constantly check the
ethernet connectivity.
When this option is set, the module will repeatedly check con­nection with the IP address entered and if connection is lost will
force a reboot of the unit. If you enable this setting you must set
the IP address to ping, the number of connection attempts and
the time interval between the attempts. Enable this function
when network connection problems could exist.
After changing this setting, press then the “Congure” button followed by “Apply conguration”.
A short countdown signals that the device is updating the changes.

Fig. 1 Login

Fig. 2 Network Parameters

Art.KRV98-KRV96 3.5" IP Videointercom

Web Server

66250905-EN - V1.0 - 06/02/14

10

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

SIP PARAMETERS

In this section it is possible the enable SIP server communica­tion (Fig. 3).
The use of the module in combination with a SIP server is an ad­ditional feature, if you are not using the IP speaker unit module
with a SIP server you don’t need to set the relevant elds.
For the correct setup of the “SIP SERVER CONNECTION” elds, it
is necessary to know the specic parameters of the SIP server to
which you are connecting the device.
Note: You need to press the edit button if you are changing pre­viously stored settings.
If you are using a simplied SIP registration ( “setup advanced
logging” unchecked) the following parameters are requested:

• Username: it is the username used during the SIP account/
extension generation on the SIP server.

• Password: it is the password for the username above used
during the SIP account/extension generation on the SIP
server.

• Server/Outbound proxy: is the server machine with name of
DNS:port or IP:port

• Realm server: is the SIP protocol used

If you check “setup advanced logging” the following additional
parameters are required:

• Extension: it is the numeric extension code generated on
the SIP server for the username above.

• Domain: it is the domain of the service where you will try
to register with. It can be an IP address or a fully qualied
domain.

After completing the SIP server connection elds remember to
check the “Enable registration to server”.
Press the “Congure” button followed by “Apply conguration”.
A short countdown signals that the device is updating the
changes.
If the setup is correct, after a while, the “Registration Status” indicator should switch from RED to GREEN.

SETTINGS

This tab has 3 subsections:

• "Weather" (Fig. 4) to set the weather services;

• "General settings" (Fig. 5) to set language and monitor back­light options;

• "Modify Password" (Fig. 6 to set the password required for
the advanced settings;

WEATHER

If an internet connection is available on the network, it is pos­sible to enable the weather forecast service through Google
Weather. The videointercom will show the weather forecast for
the selected area.

• Check "Enable weather forecast" to enable the service;

• Complete "Enter a location" eld entering the name of the
location. While entering the name, the system will suggest
the possible cities. This setup also aects the automatic date

& time correction.

Press the “Congure” button followed by “Apply conguration”.
A short countdown signals that the device is updating the
changes.

Fig. 3 SIP parameters

Red

Registration to SIP server not enabled

Gray

Registration to SIP server enabled but the
status is still not recognized

Orange

Registration to SIP server enabled but the
server has still not conrmed the registration

Green

Registration to SIP server enabled and the
server has conrmed the registration.

Fig. 4 Settings - Weather

Art.KRV98-KRV96 3.5" IP Videointercom

Web Server

66250905-EN - V1.0 - 06/02/14

11

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

GENERAL SETTINGS

• Language: set the language to be used in the user graphic
interface of the videointercom, click on the eld then select
the required language from the listbox.

• Backlight duration: it is the time in seconds before which
the display goes into energy saving mode. In energy saving
mode the display is switched o.

Press the “Congure” button followed by “Apply conguration”.
A short countdown signals that the device is updating the
changes.

MODIFY PASSWORD

The password that you can modify in this tab is the protection
password required to access the advanced settings from the
graphical interface of the videointercom. It is a numeric code

composed of 4 digits. The default password is 0000.

• Old Password: Enter the old password ;

• New Password: Enter the new password;

• Conrm new password: Repeat the new password.

Press the “Congure” button followed by “Apply conguration”.
A short countdown signals that the device is updating the
changes.

Fig. 5 General Settings

Fig. 6 Modify Password

Art.KRV98-KRV96 3.5" IP Videointercom

Web Server

66250905-EN - V1.0 - 06/02/14

12

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

INFO & UPDATES

This tab (Fig. 7) provides information about the rmware ver­sion, allows rmware updates and to upload les to be used for
melody or as the background picture.

UPLOAD FIRMARE

Under this section you can update the videointercoms rmware:
rst select the le then press the upload button and follow the
on screen instructions.

UPLOAD FILE

Under this section you can upload a le: rst select the le then
press the upload button and follow the on screen instructions.
The le size must be no more than 2Mb, if the le extension is
“JPG” or “PNG” the le can be used as background picture while
if the extension is “WAV” or “MP3” the le will be used as melody.
From the video intercoms user interface it will be possible to
select these les.

LOG FILES

This tab is for technical support purposes. If necessary, it is pos­sible to download the log le to send to the technical support in
case of malfunctioning.

CHANGE LOGIN DATA

If necessary you can change the access credentials (username
& password).
To change the access credentials, from the login page (Fig. 1)
rst enter the current user name and password then click on the
button “Change login data” .
In the page “Changing user data” ll in the required elds:

• New username: Enter the new user name

• New password: Enter the new password

• Conrm new password: Enter again the password above

After completing, click on the “Change login data” and wait to
be redirected to the login page. The new access credentials
must be used to enter.

Fig. 7 Info & Updates

Fig. 8 Log les

Fig. 9 Change Login Data

Art.KRV98-KRV96 3.5" IP Videointercom

Web Server

66250905-EN - V1.0 - 06/02/14

13

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

NETWORK SETTINGS

Network settings (IP Address, Gateway, Subnet Mask and DNS) must be set according to the local area network (LAN).

This information will normally be available from the network administrator but may also be retrievable using a PC, smart phone or
tablet already connected to the network:-

This example uses Microsoft Windows 7 (Other versions of Windows may dier slightly):

• Open the “Control Panel” then double click on the “Network
and Sharing Center” icon;

• Click on “Local Area Connection” then click on the “Details”
Button

• The new window will show the network details, make a note
of the “IPv4 Address”, “IPv4 Subnet Mask”, “IPv4 DNS Server”
and “IPv4 Gateway”.

Fig. 10

Fig. 11

Web Server

Art.KRV98-KRV96 3.5" IP Videointercom

66250905-EN - V1.0 - 06/02/14

14

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

• These details can now be used to setup your Videx devices.
Ensure you use a free IP address for each device (This should
be obtained from the network administrator or for a simple
home network it should be selected from outside the pool
of DHCP addresses (Use the ping command from the com­mand prompt to check if the IP address is currently in use. i.e.
To test IP address 192.168.2.50, from the command prompt
type ‘ping 192.168.2.50’ and press return. If you receive a
timeout then the IP address is likely to be available. If you re­ceive replies then the IP address is in use and another should
be used). Finally, use the details obtained above to complete
the “Subnet Mask”, “Gateway” and “DNS Server” elds.

The “Gateway” and “DNS Server” settings are particularly im­portant for internet services. For example, the use of domain
names, SIP settings and the weather application. For a simple
system such as a home setup with a single router this informa­tion can be obtained from the web server page on the router.
(You will need the IP address for this web page and it may also
be password protected). On larger networks you should always
obtain this information from the network administrator.

Fig. 13 Fig. 14

Fig. 12

Art.KRV98-KRV96 3.5" IP Videointercom

Web Server

66250905-EN - V1.0 - 06/02/14

15

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

MENU NAVIGATION BUTTONS

Fig. 1 shows the videointercom’s default screen, if the display is
switched o, press any button to switch it on.

By pressing the

or button you select the next menu

icon while by pressing the

or button you select the
previous menu icon.
By pressing the

button you enter the submenu of the cur-

rently selected icon.

By pressing the

button, you enter directly into the “rapid
call” submenu. If the list includes one contact only the call starts
directly.

By pressing the

button, you enter directly into the “locks”

submenu.

By pressing the

button, you enable the privacy service. It

remains enabled according to the settings made.

This icon on the top left of the screen indicates

a missed call.

SIP SERVER REGISTRATION STATUS ICON

The dierent colours have the following meanings:

RED: registration to SIP server not enabled;
GREY: registration to SIP server enabled but the status is still not recognized;
ORANGE: registration to SIP server enabled but the server has still not conrmed the registration;
GREEN: registration to SIP server enabled and the server has conrmed the registration.

DATE & TIME

If an internet connection is available, the date & time are automatically congured according to the location set in the “settings”->
“weather” section of the internal webserver.

MENU ICONS

Contact Rapid Call Locks Chronology App Settings

Select one of the menu icons above using the buttons and or and then press the button.

CONTACT

This submenu allows you to call the stored contacts.
The stored contacts can be Videx IP Speaker Units,
other Videx IP Videointercoms, PCs using XN.Client-

Sip software or smartphones/tablets using XeroSip
android client. A video call is only possible with the videx door
panel.

• The display shows the list of stored contacts (Fig.2);

• Highlight the contact to call using the

or but-

tons then press the

button.

• The call starts (see CALL & CONVERSATION section)

Press the

button to go back to the main menu.

10:30

Contact

Rapid Call

Locks

Settings

Apps

Tuesday, December 4, 2013

Fig. 1 - Standard videointercom screen

XN-Panel

IP:192.168.1.5

XN-ViPh2

IP:192.168.1.2

XN-ViPh3

IP:192.168.1.3

10:30

Back

Contact

Fig. 2 - Contacts

Art.KRV98-KRV96 3.5" IP Videointercom

Graphic Interface

66250905-EN - V1.0 - 06/02/14

16

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

RAPID CALL

This submenu allows you to call your favourite con-

tacts (Videx IP Speaker Units, other Videx IP Videoint-

ercoms, PCs using XN.ClientSip software or smart-

phones/tablets using XeroSip android client):

• If there is only one contact in the favourites list, the call starts

immediately (Fig. 16) otherwise the display shows the con­tacts stored in the favourites list (Fig. 3);

• Highlight the contact to call using the

or but-

tons then press the

button.

• The call starts (see CALL & CONVERSATION section)

Press the

button to go back to the main menu.

LOCKS

This submenu allows you to activate the door panels

built-in relays. This screen shows the list of available

door panels (Fig. 4).

• First highlight he door panel using the

or buttons.

• Press the

button to enable relay 1 or the button

to enable relay 2 (If both relays are connected).

• The display signals the relay activation status

Relay 1

Relay 2

Press the

button to go back to the main menu.

CHRONOLOGY

This submenu shows the list of call events. The icon

on the left of the event species the event type:

Incoming Call, Outgoing Call and

missed call. If the event shows the icon
this means that there is a picture stored. The picture is captured
from the door panel camera to show the caller.

• Highlight the event using the

or buttons then

press the

button to recall (see CALL & CONVERSA-

TION section) the device or press the

button to view the

stored picture when available.

• To delete the complete chronology list press the

but-

ton. A conrmation of this request is required. Press the

button to conrm or the

button to cancel the deletion.

Press the

button to go back to the main menu.

XN-ViPh2

IP:192.168.1.2

XN-ViPh3

IP:192.168.1.3

10:30

Back

Rapid Code

Fig. 3 - Rapid Call

XN-ViPh2

IP:192.168.1.2

XN-ViPh3

IP:192.168.1.3

10:30

Back

Rapid Code

Fig. 4 - Locks

XN-Panel

IP:192.168.1.5

00:05
18:19:39
04-12-2013

XN-ViPh2

IP:192.168.1.2

01:35
19:16:46
04-12-2013

XN-ViPh3

IP:192.168.1.3

00:35
22:45:13
04-12-2013

10:30

Back

Chronology

DeletePhoto

Fig. 5 - Chronology

Art.KRV98-KRV96 3.5" IP Videointercom

Graphic Interface

66250905-EN - V1.0 - 06/02/14

17

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

APPS

This section displays the icons for installed apps.

• Select the APP using the

or buttons then press

the

button twice.

FORECAST (requires internet connectivity)

If correctly congured under the videointercom web server sec­tion “general settings->weather”, this APP will show the weather
forecast for the next 3 days.

Press the

button to go back to the main menu.

SETTINGS

This submenu includes 5 subpages and allows the following settings:

• Audio 1/5

• Display 2/5

• Date & Time 3/5

• Network 4/5

• Search 5/5
Without any active selection, navigate among the subpages using the

or buttons.

Press the

button to go back to the main menu.

AUDIO SETTINGS

This subpage (Fig. 7) allows you to change the ringtone melody,
the ringtone volume and the microphone & loudspeaker
volumes.

• Highlight the parameter to change using the

or

buttons.

• Change the value of the selected parameter using the

or buttons.

• Press the

button to go back to the sub page navigation

(no parameters highlighted).

Press the

button to go back to the main menu or navigate

among the subpages by pressing the

or buttons.

1/1

10:30

Back

Apps

Forecast

Fig. 6 - Apps

1/5

10:30

Short_ring.mp3

200 40 60 80 100

200 40 60 80 100200 40 60 80 100

Back

Settings

Audio

Ringtone Microphone

SpeakerRingtone

Fig. 7 - Audio settings

Art.KRV98-KRV96 3.5" IP Videointercom

Graphic Interface

66250905-EN - V1.0 - 06/02/14

18

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

DISPLAY SETTINGS

This subpage (Fig. 8) allows you to change the screen brightness
(lighiting), the background picture (Wall paper), the “privacy
time” and enables a cleaning mode.

• Highlight the parameter to change using the

or

buttons.

• With exception of “Clean mode”, change the value of the se-

lected parameter using the

or buttons. If you have

selected “Clean Mode”, press the

button to start. It
Starts a 30 seconds countdown during which you can clean
the videointercom surface without accidently activating any
of the services.

• Press the

button to go back to the sub page navigation

(no parameters highlighted).

Press the

button to go back to the main menu or navigate

among the subpages by pressing the

or buttons.

SETTINGS CURRENT TIME

This subpage (Fig. 9) allows you to change the “date & time” set­tings.

• Highlight the parameter to change using the

or

buttons.

• Change the value of the selected parameter using the
or buttons.

• Press the

button to go back to the sub page navigation

(no parameters highlighted).

Press the

button to go back to the main menu or navigate

among the subpages by pressing the

or buttons.

NETWORK SETTINGS, SIP, REBOOT

This sub page (Fig. 10) doesn't allow any settings to be
editedbut provides informations concerning the ethernet and
SIP connections and has an option to reboot the device.

• To Reboot the videointercom, Highlight the

icon using

the

or buttons then press the .

• Conrmation is required: press

button to reboot or the

to cancel.

Press the

button to go back to the main menu or navigate

among the subpages by pressing the

or buttons.

2/5

10:30

automaH.png

200 40 60 80 100

2 Hours - 30 Min.

Back

Settings

Display

Wallpaper Privacy time

Clean mode

Start

Lighting

Fig. 8 - Display settings

4

3/5

10:30

2013 10 31

Back

Settings

Current time

Day Month

Dec

Year Hour Min

Fig. 9 - Date & Time settings

4/5

10:30

Back

Settings

Network SIP

Reboot

IP Address: 192.168.1.4 SIP User: Not Registered

IP Gateway: 192.168.1.1 SIP Server: Not Registered

Subnet: 255.255.255.0

MAC: :00:1F:7B:15:F7:BC

Fig. 10 - Network settings, SIP, Reboot

Art.KRV98-KRV96 3.5" IP Videointercom

Graphic Interface

66250905-EN - V1.0 - 06/02/14

19

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

Art.KRV98-KRV96 3.5" IP Videointercom

SEARCH

This subpage (Fig. 11) allows you to search and add all the VIDEX
devices to the contact list.

• Highlight the

icon using the or buttons

then press the

button to start the search.

• This operation deletes the current contacts list so the
unit requests (Fig. 12) the setup protection code (it is the
numeric 4 digit password which can be changed from the
webserver->settings->modify password, the default is

"0000"). Highlight the digit to change using the

or

buttons then change it using the or buttons.

• Conrm the code by pressing the

button or cancel the

operation by pressing the

button.

• Once conrmed the search begins automatically (Fig. 13).
The display shows the progress and a counter shows the
number of devices found. While in progress you can inter­rupt the search by pressing the

button.

• Once the search is complete (Fig. 14), the unit shows the
search results and asks for conrmation. The “new” are de­vices that were not listed in the contacts list, the “conrmed”
are devices that were listed in the contact list, and the “not
conrmed” are devices that were listed in the contacts list
but were not found during the search procedure.

• Conrm the changes by pressing the

button or cancel

the operation by pressing the

button.

Press the

button to go back to the main menu or navigate

among the subpages by pressing the

or buttons.

5/5

10:30

Back

Settings

Search

Search Cancel

Fig. 11 - Search settings

10:30

0 00 0

Back

Settings

Insert code

OK

Fig. 12 - Search insert code settings

5/5

10:30

65%

Settings

Search

Search Cancel

Found: 0

Fig. 13 - Search in progress settings

10:30

NoYes

Info

1 new, 0 confirmed and 0 not confirmed
Do you want to save changes?

Fig. 14 - Search results settings

Graphic Interface

66250905-EN - V1.0 - 06/02/14

20

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

DOOR PANEL INCOMMING & OUTGOING CALLS

INCOMMING CALLS

The videophone can receive calls from a door panel (standard
use), from another videointercom (intercommunication) or
from a PC and/or smartphone/tablet using the relevant clients
(intercommunication).

• When the videointercom receives a call it starts to ring (Fig.

15) and the display switches on showing the video (only for
door panel call).

• Press the

button to answer and start the conversation

(Fig. 15) ;

• Press the

to enable the door panel relay 1(only for

door panel connections);

• Press the to enable the door panel relay 2 (only for door
panel connections);

• Press the

button to store a picture from the currently

shown video.

• Press the

button to enable or disable the microphone

mute. When muting (“call on mute” message) the

but-

ton icon changes from this

to this and goes back

to this

when disabling (“conversation...”) message.

• Press the

or buttons to open the volume adjustments

submenu (Fig. 17):

• Select the microphone

or loudspeaker icon using

the

or buttons, increase or decrease volume by

the

or buttons then to go back (Fig. 16) do not press

any button

• Press the

button to close the connection (Fig. 16);

INCOMMING CALLS

the “Contact”, “Rapid Call” or “Chronology” submenus start a call
as described in the relevant section then once answered contin­ue in the same way as an incoming call. (Fig.16).

10:30Call

From VN-ViPh1 - 00:08

Answer

Fig. 15 - Ingoing Call

10:30Call

To VN-ViPh1 - 00:08

Conversation...

Close

Fig. 16 - Conversation in progress

10:30Call

To VN-ViPh1 - 00:08

Ringing...

Close

200 40 60 80 100

200 40 60 80 100

Fig. 17 - Volume adjustments

Art.KRV98-KRV96 3.5" IP Videointercom

Graphic Interface

66250905-EN - V1.0 - 06/02/14

21

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

Kristallo Series Flush and surface videomonitor wall mounting instructions

135cm

135cm

g. 1 g. 1a

g. 2a

g. 4

g. 4a g. 4b

g. 3 g. 3a

g. 1b

g. 2

66250905-EN - V1.0 - 06/02/14

22

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

Kristallo Series Flush and surface videomonitor wall mounting instructions

FLUSH MOUNT KRISTALLO VIDEOPHONE

1. Protect the holes to x the videophone to the ush mounting box then embed the ush mounting box in line with the wall in a
vertical position at 135cm height from the oor as shown in gure 1.

2. As shown in gure 2, connect the wires using a at screw driver then setup the dip-switches as per provided connection dia­gram or instruction sheet.

3. As shown in gure 3, once the wires are connected, x the videophone to the ush mounting box using a Phillips screwdriver
and the two screws provided.

In order to avoid malfunctions, please do not over tighten the xing screws shown in gure 3.

4. Once the videophone is xed to the ush mounting box, place the front plate against the videophone by inserting the hooks in
the corresponding openings and hook the plate by pushing it down as shown in gure 4.

5. Test the system for correct operation.

SURFACE MOUNT KRISTALLO VIDEOPHONE

6. As shown in gure 1a, place the videophone against the wall at 135cm height from the oor and mark the xing holes. Make the
holes (5mm diameter) and insert the provided wall plugs as shown in gure 1b.

7. As shown in gure 2a, connect the wires using a at screw driver then setup the dip-switches as per provided connection dia­gram or instruction sheet.

8. As shown in gure 3a, once the wires are connected, x the videophone to the wall using a Phillips screwdriver and the two
screws provided.

In order to avoid malfunctions, please do not over tighten the xing screws shown in gure 3a.

9. Once the videophone is xed to the wall, place the front plate against the videophone by inserting the hooks in the correspond­ing openings and hook the plate by pushing it down as shown in gure 4a and hang the handset as shown in gure 4b.

10. Test the system for correct operation.

66250905-EN - V1.0 - 06/02/14

23

Kristallo Series

Art.KRV98-KRV96 - Installation instructions

Note

COSTUMER SUPPORT

All Countries:

VIDEX ELECTRONICS S.P.A.

www.videx.it - [e-mail]
Tel: [phone]
Fax: [phone]

UK Customers:

VIDEX SECURITY LTD

www.videx-security.com
Tech Line: 0191 224 3174
Fax: [phone]

The product is CE marked demonstrating its conformity and is for distribu­tion within all member states of the EU with no restrictions. This product
follows the provisions of the European Directives 2004/108/ECC (EMC);
2006/95/ECC (LVD) and 93/68/ECC (CE marking).

Main UK oce:

VIDEX SECURITY LTD

1 Osprey Trinity Park
Trinity Way
LONDON E4 8TD
Phone: [phone]
Fax: [phone]
www.videx-security.com
[e-mail]

Northern UK oce:

VIDEX SECURITY LTD

Unit 4-7
Chillingham Industrial Estate
Chapman Street
NEWCASTLE UPON TYNE - NE6 2XX
Tech Line: ([phone]
Phone: [phone]
Fax: [phone]

Greece oce:

VIDEX HELLAS Electronics

48 Filolaou Str.
11633 ATHENS
Phone: [phone]
([phone]
Fax: [phone]
www.videx.gr
[e-mail]

Danish oce:

VIDEX DANMARK

Hammershusgade 15
DK-2100 COPENHAGEN
Phone: [phone]
Fax: [phone]
www.videx.dk
[e-mail]

Benelux oce:

VIDEX BENELUX

E3 Iaan, 93
B-9800 DEINZE
Phone: [phone]
Fax: [phone]
www.videxbenelux.be
[e-mail]

VIDEX ELECTRONICS S.P.A.

Via del Lavoro, 1 - 63846 Monte Giberto (FM) Italy
Tel [phone] - Fax [phone]
www.videx.it - [e-mail]