How it Works
Videx
Loading...
318
User Manual
60 pgs6.09 Mb0

Videx VX2300, 4302N, 4303N, 4330N, 3181 User Manual

...
2.5
Edition 2010
Rev. 2.9
Index
INDEX ........................................................................................................................................................................... 3
ART.4302N .................................................................................................................................................................... 5
DIGITAL CALL PANEL ...................................................................................................................................................................................................................5
ART.4303N .................................................................................................................................................................... 8
SPEAKER UNIT MODULE WITH BUILT-IN FUNCTIONAL TO DIGITAL INTERFACE ....................................................................................................................................8
ART.4330N .................................................................................................................................................................. 11
CAMERA MODULE SPECIFIC FOR VX2300 DIGITAL SYSTEM ..........................................................................................................................................................11
ART.3181 .................................................................................................................................................................... 12
DIGITAL INTERCOM FOR VX2300 2 WIRE SYSTEM........................................................................................................................................................................12
ART.3381 .................................................................................................................................................................... 14
DIGITAL VIDEOPHONE FOR VX2300 2 WIRE SYSTEM ....................................................................................................................................................................14
ART.5488 .................................................................................................................................................................... 17
HANDS FREE VIDEOMONITOR FOR VX2300 .................................................................................................................................................................................17
ART.SL5488 ................................................................................................................................................................ 21
SLIM HANDS FREE VIDEOMONITOR ..............................................................................................................................................................................................21
ART.5188 .................................................................................................................................................................... 25
HANDS FREE INTERCOM FOR VX2300 .........................................................................................................................................................................................25
ART.317 ...................................................................................................................................................................... 29
FOUR WAY DISTRIBUTION BOX .....................................................................................................................................................................................................29
ART.318 ...................................................................................................................................................................... 30
TWO WAY PASSIVE DISTRIBUTION BOX .........................................................................................................................................................................................30
ART.2315 .................................................................................................................................................................... 31
BUS BOOSTER AND VIDEO SIGNAL AMPLIFIER ..............................................................................................................................................................................31
ART.2301N .................................................................................................................................................................. 32
ENTRANCES EXCHANGER FOR VX2300 DIGITAL SYSTEMS ............................................................................................................................................................32
ART.2306 .................................................................................................................................................................... 33
BLOCK EXCHANGER ....................................................................................................................................................................................................................33
ART.2305 .................................................................................................................................................................... 35
EXTENSION RELAY FOR VX2300 DIGITAL SYSTEMS .....................................................................................................................................................................35
ART.2380 .................................................................................................................................................................... 36
INTERFACE “2 WIRE” TO “4+1” AUDIO SYSTEM ...........................................................................................................................................................................36
ART.2321-2321/P ........................................................................................................................................................ 38
POWER SUPPLIES FOR VX2300 ...................................................................................................................................................................................................38
ART.2322 .................................................................................................................................................................... 39
POWER SUPPLY CONVERTER FROM BUS LINE TO 12 VDC ............................................................................................................................................................39
GENERAL DIRECTIONS FOR INSTALLATION ............................................................................................................ 40
VX2300 2 Wire Video Digital System
PrtCode:VX2300_2_9.doc – Pag.4 08/03/2011 Rev.2.9
Introduction
The VX2300 VIDEX Digital system is a complete video door entry system based on a two wire BUS. The main features are the following:
2 wire bus (not polarity conscious); Up to 200 meters VIDEX specific cable or 100 meters using standard telephone cable; Up to 8 video outdoor stations (b&w or colour camera); Digital or functional front panels; Digital front panels with speech playback and PC programming facilities; Up to 100 extensions (
maximum 100 units in total on the system, either intercoms, videointercoms or peripherals
);
Up to 4 devices on each extension (
maintaining the
maximum 100 units in total on the system);
Intercommunication between devices on the same extension or between devices with different extension; Local door bell facility; Active floor divider (With floor isolation); Availability of relay modules for extra services directly connected to the bus; Electric lock powered by the outdoor station.
VX2300 2 Wire Video Digital System
PrtCode:VX2300_2_9.doc – Pag.5 08/03/2011 Rev.2.9
Art.4302N
Digital Call Panel
4302N 4302NR
STEEL ALI
Made in Italy
Balance
RS232
NC
VLI
COM
NO
-
BUS
BUS
TRD
PTE
V.PB.CHIP
VLO
COLOR
a
b
c
d
e
f
g
h
i
VID2
+V2
GND
2
1
ON
Switch 2 = Not Used Switch 1 OFF = Main Camera internal Switch 1 ON = Main Camera External
j
SPB
Fig.1
DESCRIPTION
The digital call panel includes a B&W CCD camera (horizontal and vertical adjustment 10 degrees) with auto iris lens complete with LED’s for illumina­tion, a 2 x 16 character LCD display with back lighting, keypad illumination plus a keypad with 15 or 18 push buttons depending on the panel version. The panel with the repertory name has 15 buttons 3 of which for the repertory management, 10 numeric buttons ( 0..9) plus “ENTER & CLEAR”. While the standard panel has 18 buttons, 10 numeric buttons (0..9) plus “ENTER & CLEAR” and 6 alphabetic buttons (A..F). Both version have speech board (with volume adjustment) facility which guides the visitor through verbal messages. The panel allows the connection of an external coax camera for which provide also the 12Vdc power supply (150mA max). You can set, between the panel built-in camera and the external, which is the main camera by the switch 1 of the two way dip-switch bank located near the connection terminals: the main camera is the one from which the video came on a call or camera recall, anyway the other camera can be switched by the proper videophone push button. The panel is also available with colour camera (suffix “/color” to the product code). The camera illumination LEDs are infrared for B&W cameras and white light for colour cameras.
Panel details
a. Panel camera (colour or B&W) with illumination LEDs b. Panel loudspeaker c. Panel display d. Illumination LEDs for keypad e. Panel keypad f. Camera orientation adjustment g. Connection terminals and 2 way dip-switch (only switch 1 is used) h. Serial RS-232 connector (for PC connection) i. Balance, Loudspeaker volume and Microphone volume trimmers j. Speech board volume trimmer
CONNECTION TERMINALS Terminal Description NC
Built-in relay “normally closed” contact
VLI
Signal used for electric lock opening in “capacitor discharge” mode
VLO COM
Built-in relay “common” contact
NO
Built-in relay “normally open” contact
-
Ground signal
BUS
Bus connection terminals
BUS TRD
Active low “Time Clock” signal. When active the “trade code” is enabled
PTE
Active low “Push to Exit” signal. When activated switches the built-in “door open” relay
VID2
Video signal input (Coax centre core)
+V2
12Vdc 150mA max output to supply the external camera if necessary
GND
Video signal ground (Coax screen and 0V to camera)
VX2300 2 Wire Video Digital System
PrtCode:VX2300_2_9.doc – Pag.6 08/03/2011 Rev.2.9
PROGRAMMING
The programming of the unit can be carried out from the panel keypad or a PC via RS-232 serial connection and the PC programming software. The programming step 6.3 is only available if the panel is programmed as “MAIN” (main door panel in a system with main entrance and secondary entrances using Art.2306 exchangers). On systems with main and secondary entrances, panels at the main entrances must be set as “MAIN” while panels at the block entrances must be set as “STAND.” (standard). The main door panels call all the apartments on the system so for each apartment the block ad­dress (2306 address) must be programmed in addition to the device address.
PROGRAMMING VIA PANEL KEYPAD
Prg. Step
Display Operation
1
ENTER FLAT NR.
OR SEARCH
The panel is in stand-by
Press “0” button
2
CODE:******
Type the ENGINEER’s code (factory default six times “1”) to access to the programming menù (the display will show a star for each digit typed).
Press “ENTER”
3
CODE:****** NEW:
If required type a new ENGINEER’s code (up to 6 digits).
Press “ENTER”
4
TRADE C.: xxxx NEW:
Type the new TRADE CODE (up to 6 digits)
1
or leave unchanged (if existing).
Press “ENTER”
5
0 = STAND. 1=MAIN 0 NEW:
Type 0 if the panel is used on system with 1 or more entrances on the same level or on secondary entrances on systems with main and secondary entrances. Type 1 if the panel is used as main entrance on a system with main entrances and secondary entrances.
Press “ENTER”
6
MEM.LOCATION:
Type a memory location to program (1..998)
2
or nothing to jump to programming step 6.
Press “ENTER”
6.1
FLAT:ffffff NEW:
Type the new “FLAT CODE” (up to 6 digits) or leave unchanged (if existing). The “FLAT CODE ” is the number used by the visitor to call the flat by typing the number into the door panel keypad and pressing enter.
Press “ENTER”
6.2
ID PHONE:iii NEW:
Type the new “ID PHONE” (up to 3 digits)
3
or leave unchanged (if existing). The “ID PHONE” is the ID of the unit
(intercom or videophone) located inside the flat.
Press “ENTER”
6.3
ID BLOCK:bb NEW:
Type the new “ID BLOCK” (2 digit) or leave unchanged (if existing). The “ID BLOCK” is the ID of the block (set on the Art.2306 relative to the block) to which the unit (intercom, videophone or relay) is connected. This setting is available only when main mode is set..
Press “ENTER”
6.4
DOOR CODE:dddddd NEW:
Type the new “DOOR CODE” (up to 6 digits) or leave unchanged (if existing). The “DOOR CODE” is the code that allows the user to open the door from the outside by typing it in at the door panel keypad. (Pressing CODE followed by the code and then enter).
Press “ENTER”
6.5
USER NAME:
uuuuuuuuuuuuuuuu
Type the new “USER NAME” (up to 16 characters) or leave unchanged (if existing). The “USER NAME” is the name shown when the visitor use the repertory name facility (only on 4302R)
Press “ENTER”, the programming goes back at the beginning of point 6
7
SPEECH TIME:sss
Type the new “SPEECH TIME” (up to 3 digits in seconds)or leave unchanged (if existing). This is the duration of the conversation time. When the speech time expire the conversation is automatically closed.
Press “ENTER”
8
DOOR TIME:ddd
Type the new “DOOR TIME” or leave unchanged (if existing). This is the duration of door open relay actuation. The relay will activate for the time specified by this value.
Press “ENTER”
9
DEVICE n:n
Type the new “DEVICE NO” or leave unchanged (if existing). This is an unique identifier for the panel. It is used for camera recall operation (see videophone instructions)
Press “ENTER”
10
1=ENG, 2=IT, 3=ESP 4=POR, 5=FR, 6=GER
The display shows the selected language by the relevant number underlined. Type the number relevant to the required language or leave it unchanged.
Press “ENTER”
11
1=NO, 2=ST, 3=CMB
SPEECH BOARD
The display shows the selected speech board operation mode
4
by the relevant number underlined. Leave un-
changed or type the number relevant to the operating mode required.
Press “ENTER”
12
TEST MODE: 1-2, ENTER=END
Choose the required test mode
5
to test or press “ENTER” to exit programming
Notes
1
The trade code is the door opening code reserved to periodic visitors like postman, milkman etc. The trade code only works if the TRD input is shorted to ground.
2
Memory locations “0” and “999” are reserved to store respectively the “stand-by logo” and the “switched logo” that are two message of 16 charac­ters each that are alternatively shown on the display when the unit is in stand-by mode. These messages may be customized to provide help to the visitors.
3
The ID PHONE is the binary address of the unit set on the 8 way dip-switch.
4
In mode one the speech board is disabled, in mode 2 the numbers are said digit by digit while in mode 3 the numbers are said as per pronu ncia­tion.
5
Each of the 2 test modes make a call to the intercoms/videophones stored in memory to check if it answers. In mode 1 the unit performs a quick test without switching on the intercoms/videophones and exits the test when the first error is encountered (the display shows the related error code (see table below). In mode 2 it makes the same tests as mode 1 but when an error is encountered it is sig­nalled for 5 seconds with the error code then the test continues until all apartments are tested.
VX2300 2 Wire Video Digital System
PrtCode:VX2300_2_9.doc – Pag.7 08/03/2011 Rev.2.9
Test Mode: Error Codes Table
Code Message / Description
1 Called User not available in the system: the device related to the user is not recognized in the system 2 Called User is present but does not answer: the device related to the user is recognized in the system but does not answer 3 Other transmissions recognized on the BUS: because of an intercommunicating conversation or a call from another door panel. 4 Called User in privacy mode: the intercom/videophone called is in “privacy” mode. 5 The end of conversation is not recognized: The intercom/videophone related to the user does not recognize the end of conversation
TO SET MAIN CAMERA
To set the main camera, operate the switch 1 on the two way dip-switch bank Switch Position Description
ON
2
1
=OFF
=ON
ON
SW
The main camera is the door panel built-in camera: during a call or a camera recall the video shown by the monitor is the video com ­ing from the door panel built in camera. To switch to the external camera (if connected) operate the videophone proper button.
ON
2
1
=OFF
=ON
ON
SW
The main camera is the external camera: during a call or a camera recall the video shown by the monitor is the video coming from the external camera. To switch to the door panel built-in camera operate the videophone proper button.
SPECIFICATION
Housing/Mounting
Size of two modules 4000 Series / 4000 Series Modular System
Push Buttons
12 buttons Keypad
Programming
Yes, carried out through the panel keypad or via PC through serial RS-232 connection
Controls
Yes, balance trimmer plus microphone, loudspeaker volume trimmer
Interfaces
Yes, one serial RS-232 interface for pc connection
Memory
Yes, can be stored up to 250 users for a maximum of 100 flats
Power Supply
Supplied by the bus
Working Temperature
-10 +50ºC
CUSTOMER SUPPORT INFORMATION
All Countries Customers UK Customers VIDEX Electronics S.p.A.
www.videx.it – technical@videx.it
Tel.+39 0734 631669
Fax +39 0734 632475
VIDEX Security LTD
www.videx-security.com
Tech Line 0191 224 3174
Fax 0191 224 1559
The product is CE marked demonstrating its conformity and is for distribution within all member states of the EU with no restrictions. This product follows the provisions of the European Directives 89/336/EEC & 92/31/EEC (EMC), 73/23/EEC (LVD) and 93/68/EEC (CE marking).
Il prodotto è marchiato CE a dimostrazione della sua conformità e può essere distribuito liberamente all’interno dei paesi membri dell’unione europea EU. Questo prodotto è conforme alle direttive Europee 89/336/EEC & 92/31/EEC (EMC), 73/23/EEC (LVD) e 93/68/EEC (Marca tura CE).
VX2300 2 Wire Video Digital System
PrtCode:VX2300_2_9.doc – Pag.8 08/03/2011 Rev.2.9
Art.4303N
Speaker unit module with built-in functional to digi­tal interface
Fig.1 Fig.2
DESCRIPTION
Functional speaker module for up to 64 traditional call buttons. The unit circuitry incorporates :
The transmitting amplifier with condenser microphone and volume control; The receiving amplifier with volume control; The audio balance circuit with the “BALANCE” control; The enslavement relay to enable the electric lock (3 contacts: common, normally open and normally closed). It can also operate as capacitor dis-
charge to power directly the electric lock;
The call buttons from 0 to a maximum of 2 depending on the module version; The illumination LEDs for the card name holder.
The module is available in 3 versions according to the number of built-in push buttons.
Module Details:
a. Loudspeaker; b. Call push button (0 up to 2 according to the model); c. Card name holder; d. Microphone; e. Balance control; f. Loudspeaker volume Control; g. Microphone volume control; h. Door relay operating mode jumper;
- Lower position for capacitor discharge;
- Upper position for dry contacts;
i. Connector to supply button expansion modules
- 3 modules can be connected between LD1 and GND;
- 3 modules can be connected between LD2 and GND;
- +V is 30V output with no current regulation to supply 3 button expansion modules connected in series
j. Dip-switch to carry out the following programming:
- Door station ID (switches 1 to 3);
- Door opening time (switch 4);
- Conversation time (switch 5);
- Offset (switch 6);
- Camera selection order (switch 7);
- 2306 block mode (switch 8);
k. System connection terminals; l. CNV connector to link to Art.4330N camera module; m. Wires to configure built-in buttons:
- White = Common;
- Red = P1;
- Blue = P2
AVAILABLE MODULE VERSIONS
Art.4303N-0
Art.4303N-1
Art.4303N-2
VX2300 2 Wire Video Digital System
PrtCode:VX2300_2_9.doc – Pag.9 08/03/2011 Rev.2.9
BUTTONS LAYOUT
As factory preset, built-in buttons are configured to call address 1 or 1 & 2 but the setup may be changed by altering the position of the 3 wires shown in figure 2 with reference “m”.
Art.4303N-1 Art.4303N-2
FRONT LEDS SIGNALLING DESCRIPTION
Symbol Description
When illuminated, indicates that it is not possible to make a call because a call or a conversation is in progress (from the out­door station from which you are calling or from another outdoor station on systems with multiple entrances). The LED will be off when the system is in stand-by If illuminated, indicates that the call from the outdoor station is in progress. The LED will switch OFF when the call is an­swered or after the programmed number of rings.
If illuminated, indicates that it is possible to speak because the call has been answered. The LED will switch OFF at the end of a conversation (or at the end of the conversation time).
If illuminated, indicates that the door lock has been released. It will switch OFF at the end of the programmed “door opening” time.
PROGRAMMING
The programming consists of the following settings:
- Unit ID (1..8);
- Door Opening Time (2 or 6 seconds);
- Conversation Time (1 or 2 minutes);
- Buttons Matrix start address (1 or 65);
- Default Camera (4330N or External);
- Door Open Relay operating mode (capacitor discharge or dry contacts). First 5 settings are carried out through the first 7 switches of the 8 way dip-switch (reference j on figure 2) while the 6
th
setting is carried out through the
jumper (reference h on figure 2) both accessible from the rear side of the module.
Unit ID
Switches
Position
4
5
3
2
1
876
ON
8 = OFF
4
5
3
2
1
876
ON
8 = ON
1 2 3 ID ID
OFF OFF OFF 1 9
ON OFF OFF 2 10
OFF ON OFF 3 11
ON ON OFF 4 12
OFF OFF ON 5 13
ON OFF ON 6 14
OFF ON ON 7 15
ON ON ON 8 16
Door Opening Time
Switches
Seconds
4
OFF 2 ON 6
Conversation Time
Switches
Minutes
5
OFF 1 ON 2
Matrix Button Start Address
Switches
Start
Address
6
OFF 1 ON 65
*Main Camera
Switches
Main Camera
7
OFF 4330N ON External
Door Open Relay
Operating Mode
Jumper Position
Operating Mode
Upper
Dry contacts
Lower
Capacitor ** Discharge
* This setting, when the door station includes the camera module 4330N and a second external camera, establishes which camera is the main camera from which the video signal will come from at the beginning of the call. The video signal can be switched to the secondary ca mera at any time by press­ing the specific button on the videophone or videomonitor. ** When set as capacitor discharge, connect the electric lock between terminals “GND” and “NO”.
VX2300 2 Wire Video Digital System
PrtCode:VX2300_2_9.doc – Pag.10 08/03/2011 Rev.2.9
SIGNALS ON SYSTEM CONNECTION TERMINALS
Terminal Description Terminal Description 1 Common terminal for addresses 1..8 (switch 6 = OFF) or
65..72 (switch 6 = ON)
E
Addresses 5,13,21,29,37,45,53, 61 (switch 6 = OFF) Addresses 69,77,85,93,101,109,117, 125 (switch 6 = ON)
2 Common terminal for addresses 9..16 (switch 6 = OF F) or
73..80 (switch 6 = ON)
F
Addresses 6,14,22,30,38,46,54, 62 (switch 6 = OFF) Addresses 70,78,86,94,102,110,118, 126 (switch 6 = ON)
3 Common terminal for addresses 17..24 (switch 6 = OFF) or
81..88 (switch 6 = ON)
G
Addresses 7,15,23,31,39,47,55, 63 (switch 6 = OFF) Addresses 71,79,87,95,103,111,119, 127 (switch 6 = ON)
4 Common terminal for addresses 25..32 (switch 6 = OFF) or
89..96 (switch 6 = ON)
H
Addresses 8,16,24,32,40,48,56, 64 (switch 6 = OFF) Addresses 72,80,88,96,104,112,120, 128 (switch 6 = ON)
5 Common terminal for addresses 33..40 (switch 6 = OFF) or
97..104 (switch 6 = ON)
BUS
BUS Connection terminals
6 Common terminal for addresses 41..48 (switch 6 = OFF) or
105..112 (switch 6 = ON)
BUS
7 Common terminal for addresses 49..56 (switch 6 = OFF) or
113..120 (switch 6 = ON)
PTE Active low input push to exit signal
8 Common terminal for addresses 57..64 (switch 6 = OFF) or
121..128 (switch 6 = ON)
GND Ground
A
Addresses 1,9,17,25,33,41,49, 57 (switch 6 = OFF)
C Door open relay common contact
Addresses 65,73,81,89,97,105,113, 121 (switch 6 = ON)
B
Addresses 2,10,18,26,34,42,50, 58 (switch 6 = OFF)
NC Door open relay normally closed contact
Addresses 66,74,82,90,98,106,114, 122 (switch 6 = ON)
C
Addresses 3,11,19,27,35,43,51, 59 (switch 6 = OFF)
NO Door open relay normally open contact
Addresses 67,75,83,91,99,107,115, 123 (switch 6 = ON)
D
Addresses 4,12,20,28,36,44,52, 60 (switch 6 = OFF)
VAUX
35Vdc power supply input (if used, the module is powered locally and not from the BUS)
Addresses 68,76,84,92,100,108,116, 124 (switch 6 = ON)
BUTTONS MATRIX
The button, when pressed, will generate a call to a specific address according to the terminals to which the button is connected: i.e. a button con­nected between terminals “2” and “B”, when pressed will generate a call to the address 10 if the dip-switch 6= OFF or a call to the address 74 if the switch 6=ON.
SW6
OFF
1 2 3 4 5 6 7 8
A 1 9 17 25 33 41 49 57 B 2 10 18 26 34 42 50 58 C 3 11 19 27 35 43 51 59 D 4 12 20 28 36 44 52 60
E 5 13 21 29 37 45 53 61
F 6 14 22 30 38 46 54 62 G 7 15 23 31 39 47 55 63 H 8 16 24 32 40 48 56 64
SW6
ON
1 2 3 4 5 6 7 8
A 65 73 81 89 97 105 113 121 B 66 74 82 90 98 106 114 122 C 67 75 83 91 99 107 115 123 D 68 76 84 92 100 108 116 124 E 69 77 85 93 101 109 117 125 F 70 78 86 94 102 110 118 126 G 71 79 87 95 103 111 119 127 H 72 80 88 96 104 112 120 128
UNIT SPECIFICATION
Housing/Mounting
One 4000 Series Module / 4000 Series Modular System
Push Buttons
Yes, from 0 to 2 call buttons according to the model
Programming
Yes, carried out by the 8 way dip-switch located on the rear of the module
Controls
Microphone and Loudspeaker volume trimmers plus balance trimmer
Front plate Finishes
Mirror stainless steel (standard) and Anodized aluminium (add /a after the product code)
Power Supply
Supplied by the BUS line
Working Temperature
-10 +50ºC
CUSTOMER SUPPORT INFORMATION
All Countries Customers UK Customers VIDEX Electronics S.p.A.
www.videx.it – technical@videx.it
Tel.+39 0734 631669
Fax +39 0734 632475
VIDEX Security LTD
www.videx-security.com
Tech Line 0191 224 3174
Fax 0191 224 1559
The product is CE marked demonstrating its conformity and is for distribution within all member states of the EU with no restrictions. This product follows the provisions of the European Directives 89/336/EEC & 92/31/EEC (EMC), 73/23/EEC (LVD) and 93/68/EEC (CE marking).
Il prodotto è marchiato CE a dimostrazione della sua conformità e può essere distribui­to liberamente all’interno dei paesi membri dell’unione europea EU. Questo prodotto è conforme alle direttive Europee 89/336/EEC & 92/31/EEC (EMC), 73/23/EEC (LVD) e 93/68/EEC (Marcatura CE).
VX2300 2 Wire Video Digital System
PrtCode:VX2300_2_9.doc – Pag.11 08/03/2011 Rev.2.9
Art.4330N
Camera module specific for VX2300 Digital System
Fig.1 Fig.2
DESCRIPTION
This module is equipped with a CCD camera with auto iris lens complete with LED’s for illumination . The module is available in black and white or col­our version (put “/color” after the product code). The illumination LED’s are infrared for B&W cameras and white light for colour cameras. The camer a has horizontal and vertical adjustment (10 degrees). The module has a coax video signal input for an external additional camera (switched from the vid­eophone or video monitor) with a facility to power the external camera directly.
Module Details:
a. Camera window; b. Illumination LEDs (white light or infrared depending on camera type); c. Camera horizontal and vertical adjustment; d. CNV connector to link between the camera and the Art.4303N using the supplied cable; e. External camera power supply setup jumper:
- In left position (factory preset) the external camera is powered from an external power supply
- In right position, the external camera is powered from the terminal +V2 (12Vdc) & GND
f. External camera connections:
- VID2 Video signal input (Coax centre core);
- GND Video signal ground (Coax screen and 0V to camera);
- +V2 12Vdc 150mA max output to supply the external camera if necessary.
SPECIFICATION
Housing/Mounting
One 4000 Series Module / 4000 Series Modular System
Push Buttons
N/A
Programming
N/A
Controls
Camera orientation adjustment
Front plate Finishes
Mirror stainless steel (standard), Anodized Aluminium (add /a after the product code) or High Brass (add /HB)
Power Supply
Supplied by the relevant speaker unit module
Working Temperature
-10 +50ºC
CUSTOMER SUPPORT INFORMATION
All Countries Customers UK Customers VIDEX Electronics S.p.A.
www.videx.it – technical@videx.it
Tel.+39 0734 631669
Fax +39 0734 632475
VIDEX Security LTD
www.videx-security.com
Tech Line 0191 224 3174
Fax 0191 224 1559
The product is CE marked demonstrating its conformity and is for distribution within all member states of the EU with no restrictions. This product follows the provisions of the European Directives 89/336/EEC & 92/31/EEC (EMC),
73/23/EEC (LVD) and 93/68/EEC (CE marking).
VX2300 2 Wire Video Digital System
PrtCode:VX2300_2_9.doc – Pag.12 08/03/2011 Rev.2.9
Art.3181
Digital intercom for VX2300 2 Wire System
Fig.1 Fig.2
DESCRIPTION
Intelligent intercom with “door open/intercommunicating call” push button (key), bus relay (Art.2305) activation button (dot), “privacy ON-OFF” switch, “door open” and “privacy on” LEDs and call tone volume control (3 levels). To reduce bus current all apartment devices are in a sleep mode when not used. In case a user forgot to replace the handset, each operation must be executed within 10 seconds of lifting the handset otherwise the handset re­turns to its sleep state. To then perform an operation it would be necessary to hang up the handset and pick it up again.
PUSH BUTTONS, LEDS AND CONTROLS (FIG.1)
a Door open push button – Intercommunicating call. For an intercommunicating call, pick up the han dset and press as many times as the
extension or address value to call (see SW3 Intercommunication Settings).
b Activate bus relay board Art.2305 push button. To activate a bus relay pick up the handset and press as many times as the address val-
ue of the relay. c Door Open LED. Switched ON if the door is open. Its operation depends on additional connections. d Privacy ON LED. Switched ON when the privacy service is active e Privacy ON-OFF switch. The privacy duration time can be programmed. If the intercom is programmed for a specific privacy duration,
after the service is enabled to “ON” (red LED ON), the service will automatically turn off when the time expires. f Call tone volume control (3 levels)
DIP-SWITCHES AND JUMPERS (FIG.2)
SW1 Switches from 1 to 7 are used for unit address (from 1 to 127 binary coded). Last switch (8) is not used SW2 Switches 1,2 and 3 are used to set privacy duration time. Switch 4 is not used. SW3 Switches 1,2 and 3 are used to for intercommunication settings. Switch 4 is not used. S1 Impedance terminator. The jumper must be normally closed. When more videophones/intercoms are connected in parallel (from a pe-
ripheral to another and so on until the last) the jumper must be open for all the intercoms except for the last following the connection or-
der.
PROGRAMMING
After each programming operation carried out through dip-switches or jumpers it is necessary to temporary disconnect the phone from the BUS or from the power supply if locally powered.
SW1 – INTERCOM ADDRESS
Switches Status Binary Code – Decimal Value
Decimal
Code
7 6 5 4 3 2 1 64 32 16 8 4 2 1
OFF OFF OFF OFF OFF OFF ON 0 0 0 0 0 0 1 1 OFF OFF OFF OFF OFF ON OFF 0 0 0 0 0 1 0 2 OFF OFF OFF OFF OFF ON ON 0 0 0 0 0 1 1 3 OFF OFF OFF OFF ON OFF OFF 0 0 0 0 1 0 0 4
OFF ON OFF OFF ON OFF ON 0 1 0 0 1 0 1 37
ON ON OFF OFF OFF ON ON 1 1 0 0 0 1 1 99
The table above shows how to set the address of the phone. Considering that ON = 1 and OFF = 0, multiply each digit for the relevant decimal weigh t then add values obtained to get the address: E.g. as highlighted in the table OFF,ON,OFF,OFF,ON, OFF,ON in binary is equal to 0100101 then adding each digit for the relevant decimal weight you obtain the address 37.
Note
The maximum number of units allowed is 100 but the address of each unit can be a value between 1 and 127
VX2300 2 Wire Video Digital System
PrtCode:VX2300_2_9.doc – Pag.13 08/03/2011 Rev.2.9
SW2 – PRIVACY DURATION TIME
Switches Status
Privacy Mode
(switch 1)
Privacy Duration
(switches 2,3)
4 3 2 1
OFF OFF
OFF
The privacy duration time is set by switches 2 and 3. When enabled the privacy ser­vice will be disabled when the set time expires or the switch is moved back to off.
15 minutes OFF ON 1 hour ON OFF 4 hours ON ON 8 hours
ON
No privacy time expiration: the privacy service is enabled or disabled only by the slide switch.
SW3 – INTERCOMMUNICATION SETTINGS
Switches Status
Intercommunication Mode
(switch 1)
Videophone
Extension
(switches 2,3)
4 3 2 1
OFF OFF
OFF
Intercommunication allowed between videophones (same unit address) inside the same flat. To call an extension pick up the handset then press the “door open” button as many times as the extension value (Eg. extension 2 two times, 3 three times etc).
Each intercom/videophone in the same apartment must have a different ex ten­sion address, the master address must always be set except when one of the intercom/videophone is set for apartment intercommunicati on (i.e. in a 3 inter­com/videophone installation, one of the intercom/videophone must have the extension address 1 while the others must have different addre sses)
1 (master) OFF ON 2 (slave) ON OFF 3 (slave)
ON ON 4 (slave)
OFF OFF ON
Intercommunication allowed between videophones (different apartment). To call an extension pick up the handset then press the “door open” button as many times as the address value (Eg. extension 10 ten times, 12 twelve times etc)
On installations where there are more than one intercom/videophone in the same apartment and intercommunication between different apartments is required, only one intercom/videophone may be set wit h this function (SW3.1=ON, SW3.2=OFF, SW3.3=OF F). The other inter­com/videophones in the apartment must be set for local intercommunication with extension addresses “2-4” (slaves). From the inter­com/videophone set for intercommunication wi th ot her apartm ents it will be not possible to i ntercom munica te wit hin the apartme nt but slave extensions 2-4 will be able to intercommunicate with each other.
NUMBER OF RINGS
The number of rings can be set to 3 (factory preset) or 6. To change the number of rings proceed as follow:
- Disconnect the power supply from the system;
- Short the terminals “LB” and “GND”;
- Reconnect the power supply to the system checking the privacy on LED and then remove the short between terminals “LB” and “GND”;
- The number of LED flashes will be 1 for 3 rings or 2 for 6 rings.
Each time this operation is carried out the number of rings is switched between the values 3 and 6.
SIGNALS ON CONNECTION TERMINALS Signal Description BUS
Bus contacts
BUS LED-
Door open LED ground signal input
LED+
Door open LED power supply input (+12Vdc)
GND
Ground signal
GND
Ground signal
AL
Alarm input (not implemented)
LB
Local Bell contact (put a push button between this terminal and the relevant GND terminal)
SPECIFICATION
Housing/Mounting
3000 Series Intercoms / direct wall mounting
Push Buttons
Yes, two
Programming
Yes, carried out by the dip-switches inside the intercom
Controls
Call tone volume and privacy ON-OFF switch
Power Supply
Supplied by the BUS line
Working Temperature
-10 +50ºC
CUSTOMER SUPPORT INFORMATION
All Countries Customers UK Customers VIDEX Electronics S.p.A.
www.videx.it – technical@videx.it
Tel.+39 0734 631669
Fax +39 0734 632475
VIDEX Security LTD
www.videx-security.com
Tech Line 0191 224 3174
Fax 0191 224 1559
The product is CE marked demonstrating its conformity and is for distribution within all member states of the EU with no restrictions. This product follows the provisions of the European Directives 89/336/EEC & 92/31/EEC (EMC), 73/23/EEC (LVD) and 93/68/EEC (CE marking).
Il prodotto è marchiato CE a dimostrazione della sua conformità e può essere distribuito liberamente all’interno dei paesi membri dell’unione europea EU. Questo prodotto è conforme alle direttive Europee 89/336/EEC & 92/31/EEC (EMC), 73/23/EEC (LVD) e 93/68/EEC (Marca tura CE).
VX2300 2 Wire Video Digital System
PrtCode:VX2300_2_9.doc – Pag.14 08/03/2011 Rev.2.9
Art.3381
Digital videophone for VX2300 2 Wire System
Fig.1 Fig.2
DESCRIPTION
Intelligent videophone with 4” flat screen B&W monitor with “door open” and “camera recall” push buttons, bus relay enable button, service button, “pri ­vacy ON-OFF” button plus “privacy on” and “door open” LEDs. Controls: 3 levels of call tone volume (both main and local) plus contrast and brightness. The videophone is available also in colour version Art.3481 which uses a 3,5” active matrix LCD monitor. To reduce bus current all apartment devices are in a sleep mode when not used. In case a user forgot to replace the handset, each operation must be executed within 10 seconds of lifting the handset otherwise the handset returns to its sleep state. To then perform an operation it would be necessary to hang up the handset and pick it upagain.
PUSH BUTTONS, LEDS AND CONTROLS (FIG.1)
a Door open push button – Intercommunicating call. For an intercommunicating call, pick up the han dset and press as many times as the
extension or address value to call (see SW3 Intercommunication Settings).
b Camera recall push button. Pick up the handset and press as many times as the DEVICE N. of the door station to switch on.
If the door station uses the Art.4303N plus the Art.4330N, pressing this button during a conversation switches the video signal coming from the camera module to the video signal coming from the camera module input for external camera.
c Activate bus relay board Art.2305 push button. To activate a bus relay pick up the handset and press as many times as the address val-
ue of the relay. d Service push button. e Privacy ON-OFF push button. The privacy duration time can be programmed. f Privacy ON LED. Switched ON when the privacy service is active. g Door Open LED. Switched ON if the door is open. Its correct operation depend from correct connection (terminals 1 and 18) h Call tone volume control (3 levels) i Contrast control (left decrease, right increase) l Brightness control (left decrease, right increase)
DIP-SWITCHES AND SWITCHES (FIG.2)
SW1 Switches from 1 to 7 are used for unit address (from 1 to 127 binary coded). Last switch (8) is not used SW2 Switches 1,2 and 3 are used to set privacy duration time. Switch 4 is not used. SW3 Switches 1,2 and 3 are used for intercommunication settings. Switch 4 is used to set the slave mode. SW Impedance terminator. The standard position is “close”. When more videophones are connected in parallel (from a vi deophone to an oth-
er and so on until the last) it must be set to “open” for all the videophones except for the last following the connection order.
VX2300 2 Wire Video Digital System
PrtCode:VX2300_2_9.doc – Pag.15 08/03/2011 Rev.2.9
PROGRAMMING
After each programming operation carried out through dip-switches or jumpers it is necessary to temporary disconnect the videophone from the BUS or from the power supply if locally powered.
NUMBER OF RINGS
The number of rings can be set to 3 (factory preset) or 6. To change the number of rings proceed as follow:
- Unplug the flat cable from the pcb connection board;
- Put in short the terminals 13 and 14;
- Plug-in the flat cable checking the privacy on LED and remove the short between terminals 13 and 14;
- The number of LED flashes will be 1 for 3 rings or 2 for 6 rings.
Each time this operation is carried out the number of rings is switched between the values 3 and 6.
SW1 – VIDEOPHONE ADDRESS
Switches Status Binary Code – Decimal Weight
Address
7 6 5 4 3 2 1 64 32 16 8 4 2 1
OFF OFF OFF OFF OFF OFF ON 0 0 0 0 0 0 1 1 OFF OFF OFF OFF OFF ON OFF 0 0 0 0 0 1 0 2 OFF OFF OFF OFF OFF ON ON 0 0 0 0 0 1 1 3 OFF OFF OFF OFF ON OFF OFF 0 0 0 0 1 0 0 4
OFF ON OFF OFF ON OFF ON 0 1 0 0 1 0 1 37
ON ON OFF OFF OFF ON ON 1 1 0 0 0 1 1 99
The table above shows how to set the address of the videophone. Considering that ON = 1 and OFF = 0, multiply each digit for t he relevant decimal weight then sum values obtained to get the address: E.g. as highlighted in the table OFF,ON,OFF,OFF,ON, OFF,ON in binary is equal to 0100101 then multiplying each digit for the relevant decimal weight you obtain the address that is 37.
Note
The maximum number of units allowed is 100 but the address of each unit can be a value between 1 and 127.
SW2 – PRIVACY DURATION TIME
Switches Status
Privacy Mode
(switch 1)
Privacy Duration
(switches 2,3)
4 3 2 1
OFF OFF
OFF
The privacy duration time is set by switches 2 and 3. When enabled the privacy ser­vice is disable when the time set expires or the relevant button is pressed again.
15 minutes OFF ON 1 hour ON OFF 4 hours ON ON 8 hours
ON
No privacy time expiration: the privacy service is enabled or disabled only by the pri­vacy button.
SW3 – INTERCOMMUNICATION SETTINGS
Switches Status
Intercommunication Mode
(switch 1)
Videophone
Extension
(switches 2,3)
4 3 2 1
OFF OFF
OFF
Intercommunication between videophones in the same apartment. To call an exten­sion pick up the handset then press the “door open” button as many times as the ex­tension (Eg. extension 2 two times, 3 three times etc). Each intercom/videophone
must have a different extension address, the master address must al ways be set (i.e. in a 3 intercom/videophone installation, one of the inter­com/videophone must have the extension address 1 while the others must have different addresses included from 2 to 4)
1 (Master) OFF ON 2 (Slave) ON OFF 3 (Slave)
ON ON 4 (Slave)
OFF OFF ON
Intercommunication between videophones in different apartments. To call an exten­sion pick up the handset then press the “door open” button as many times as the ad­dress (Eg. extension 10 ten times, 12 twelve times etc)
Slave Mode (switch 4) for Extensions 2, 3 and 4
OFF Factory preset, during a call the slave videophones will only ring while the master will also show the video picture). The picture will only
appear on the slave when answered.
ON During a call, the videophone will ring and show the video picture: in this case the videophone must be powered locally using an Art.2321
and connecting BUS+ to “Vin” (9) and BUS- to “–“ (10) (the local power supply is required for each black & white slave videophone or starting from the third slave videophone when are used all colour videophones). If you set ON this switch for one slave vi deophone,
you must set ON the same switch also for the relevant master videophone.
NOTE: Extension 1 is mandatory. On systems with more than one device in an apartment, each device must have a unique extension ID.
On installations where there are more than one intercom/videophone in the same apartment and intercommunication between different apartments is required, only one intercom/videophone may be set wit h this function (SW3.1=ON, SW3.2=OFF, SW3.3=OF F). The other inter­com/videophones in the apartment must be set for local intercommunication with extension addresses “2-4” (slaves). From the inter­com/videophone set for intercommunication wi th ot her apartm ents it will be not possible to i ntercom munica te wit hin the apartme nt but slave extensions 2-4 will be able to intercommunicate with each other.
VX2300 2 Wire Video Digital System
PrtCode:VX2300_2_9.doc – Pag.16 08/03/2011 Rev.2.9
VIDEOPHONE CONNECTION BOARD ART.3980
As 3000 series videophones also this version uses the Art.3980 connection board.
Fig.3
SIGNALS ON TERMINALS OF ART.3980 CONNECTION BOARD
Terminal Signal Description 1 -LD
Door open LED ground signal input
2 AL
Alarm input (not implemented)
3 S
Contacts for “S” service push button. Linked together when the button is pressed
4 S 5 GND
Ground signal
6 7 8 9 Vin
Auxiliary power supply input (for local power supply)
10 ­11 BUS
Bus contacts
12 BUS 13 -
Local bell contacts
14 LB 15 16 17 18 +LD
Door open LED power supply (12Vdc)
SPECIFICATION
Housing/Mounting
3000 Series Videophones / mounting plate plus connection board
Push buttons
Yes, 5
Programming
Yes, carried out by the dip-switches located on the rear of the videophone
Controls
Call tone volume, contrast and brightness
Power Supply
Supplied by the BUS line
Working Temperature
-10 +50 ºC
CUSTOMER SUPPORT INFORMATION
All Countries Customers UK Customers VIDEX Electronics S.p.A.
www.videx.it – technical@videx.it
Tel.+39 0734 631669
Fax +39 0734 632475
VIDEX Security LTD
www.videx-security.com
Tech Line 0191 224 3174
Fax 0191 224 1559
The product is CE marked demonstrating its conformity and is for distribution within all member states of the EU with no restrictions. This product follows the provisions of the European Directives 89/336/EEC & 92/31/EEC (EMC), 73/23/EEC (LVD) and 93/68/EEC (CE marking).
Il prodotto è marchiato CE a dimostrazione della sua conformità e può essere distribuito liberamente all’interno dei paesi membri dell’unione europea EU. Questo prodotto è conforme alle direttive Europee 89/336/EEC & 92/31/EEC (EMC), 73/23/EEC (LVD) e 93/68/EEC (Marca tura CE).
VX2300 2 Wire Video Digital System
PrtCode:VX2300_2_9.doc – Pag.17 08/03/2011 Rev.2.9
Art.5488
Hands Free Videomonitor for VX2300
164
130,00
53
1
2
3
4
Fig.1 Fig.2
DESCRIPTION
An intelligent Hands-free (surface or flush mounting) video monitor employing a colour 3.5” active matrix LCD display, with push buttons for “door open/intercommunicating call”, “answer/camera recall”, “privacy on/off”, “BUS relay activation” and 2 service buttons plus 4 LED’s associated with 4 main buttons. In addition to the above the unit has controls for loudspeaker volume, call tone volume, brightness and hue with programmable number of rings, privacy duration and intercommunication mode.
PUSH BUTTONS, LEDS AND CONTROLS (FIG.1)
Service push button - When pressed, shorts terminal “S1” to terminal “GND” (ground). Bus Relay Button to Activate bus relay board Art.2305. To activate a bus relay press as many times as the address value of the relay. Answer button - On an incoming call, operation of this button allows the user to answer and converse with the visitor. LED 2 will illumi­nate. Camera recall button - Press as many times as the DEVICE N. of the door station to switch on. Switch off button - With the system switched on (monitor on), momentary operation of the button will switch the video monitor off. The videomonitor will also automatically switch off after a time delay if the button is not pressed. LED 2 will switch off. Simplex button - Pressing and holding the button for more than 3 seconds will switch the videomonitor into SIMPLEX speech mode. Press and hold the button to speak to the caller (LED 2 will flash rapidly), release the button to listen (LED 2 will flash slowly). If the but­ton is not pressed for 10 seconds the videomonitor will switch off. The videomonitor will revert to duplex speech when another call is made. When pressed, shorts terminal “S2” to Terminal “GND” (ground). Privacy on-off button: If the monitor is switched on, press and keep pressed this button for more than 3 seconds to enable/disable the service. The re lative
LED will illuminate when the privacy service is enabled.
If the monitor is switched off, keep this button pressed together with the “speak” button
until the privacy LED switches ON. Camera select button - With a conversation in progress, press to switch from door station camera to external camera (requires Art.4330N and external camera) and viceversa. Intercommunicating call button - For an intercommunicating call, when the videomonitor is in stand-by, press as many times as the ex­tension or address value to call. Door open button - During a call, operation of this button will activate the “door open” relay (NO1, NC1, COM1). LED 4 will illuminate if terminal 6 has been connected to a door contact.
1
LED for programming purposes
2
LED relating to the operation of the answer/switch off/camera recall/simplex button
3
LED relating to the operation of privacy button
4
LED relating to the operation of door open button(powered from the connection terminal “6” of Art.5980) Loudspeaker volume control Call tone volume control
Brightness control Colour intensity control
VX2300 2 Wire Video Digital System
PrtCode:VX2300_2_9.doc – Pag.18 08/03/2011 Rev.2.9
PROGRAMMING
The videomonitor setup consists of the following settings:
- Number of Rings;
- Melody selection;
- Unit address (1..127, switches 1 to 7 of SW1);
- Bus Termination (open or close, switch 8 of SW1);
- Intercommunication mode (between apartments or within apartment switch 1 of SW3);
- Extension address (1..4, switches 2,3 of SW3);
- Slave mode (switch 4 of SW3);
- Privacy duration (switches 1,2 and 3 of SW2)
The programming of the number of rings and melody are carried out through the videomonitor push buttons , all other settings are carried out on the three dip-switch banks (SW1, SW2 and SW3) on the rear side of the video monitor.
Except the number of rings programming, it is necessary to remove temporary the power supply after making any other programming changes.
NUMBER OF RINGS AND MELODY SELECTION
First of all make a camera recall to switch on the unit then proceed with the programming operation.To alter the number of rings and select the melody, the videomonitor must be in program mode. This is achieved by operating the two following buttons at the same time (left button of the volume control and the right button of the colour intensity control) see Fig.1A 8 small buttons towards the bottom of the face plate (far left button and far right button together). When the programming mode is entered LED 1 (Fig.1A) starts flashing. This will automatically reset after 20 seconds of idle time.
Number of rings
When in the programming mode press and hold the “
” button, LED 1 will stop flashing and LED 3 (Fig.1A) will start to flash showing the number of
rings (each flash = 1 ring i.e. 6 flashes = 6 rings)
Once the value of rings has been reached release the “
” button.
Wait approx 10 seconds for LED 1 to stop flashing to signal that the new value is stored and program mode has exited.
Melody selection
When in the programming mode, press left or right call tone volume control buttons
(press the left button to navigate backward or the right button to navigate forward in the melodies selection menù) until the videomonitor plays the selected melody (during the melody play the LED1 stops flash­ing);
Before press again one of the two buttons to select previous (left button) or next (right button) melody, wait for LED1 starts flashing again then press
and hold pressed one button until the selected melody is played;
Once reached the required melody, Wait approx 10 seconds for LE D 1 to stop flashing to signal that the new value is stored and program mode has
exited.
Notes
The second melody increases its volume at each ring: first ring starts at minimum volume level up to the maximum volume level on the last ring. Are available 4 levels of volume: if are set 6 rings, the fourth, the fifth and the sixth will be emitted at the maximum volume level.
VIDEOMONITOR ADDRESS – SW1.1..7
The table above shows how to set the address of the videophone. Considering that ON = 1 and OFF = 0, mul­tiply each digit for the relevant decimal weight then sum values obtained to get the address: E.g. as highlighted in the table OFF,ON,OFF,OFF,ON, OFF,ON in binary is equal to 0100101 then m ultiplying each digit for the relevant decimal weight you obtain the address that is 37.
Switches Status Binary Code – Decimal Weight
Address
7 6 5 4 3 2 1 64 32 16 8 4 2 1
OFF OFF OFF OFF OFF OFF ON 0 0 0 0 0 0 1 1 OFF OFF OFF OFF OFF ON OFF 0 0 0 0 0 1 0 2 OFF OFF OFF OFF OFF ON ON 0 0 0 0 0 1 1 3 OFF OFF OFF OFF ON OFF OFF 0 0 0 0 1 0 0 4
OFF ON OFF OFF ON OFF ON 0 1 0 0 1 0 1 37
ON ON ON ON ON ON ON 1 1 1 1 1 1 1 127
Note
The maximum number of units allowed is 100 but the address of each unit can be a value between 1 and 127.
BUS TERMINATION - SW1.8
The factory preset for this switch is ON: termination enabled. In case of more units (intercoms, videophones or video monitors) in a parallel connection (bus wires are connected to the terminals of the first unit then from this to the second and so on up to 4 units max) switch 8 must be set to ON only for the last unit in the chain while on all other units must be set to OFF (bus termination disabled).
INTERCOMMUNICATION MODE – SW3.1
This switch establishes the intercommunication mode: in OFF position (default) intercommunication is between units in the same apartment (same addresses but different extension); in ON position the intercommunication is between units in different apartments (different addresses).
On installations where there are more than one intercom/videophone in the same apartment and intercommunication between different apartments is required, only one intercom/videophone may be set wit h this function (SW3.1=ON, SW3.2=OFF, SW3.3=OF F). The other inter­com/videophones in the apartment must be set for local intercommunication with extension addresses “2-4” (slaves). From the inter­com/videophone set for intercommunication wi th ot her apartm ents it will be not possible to i ntercom munica te wit hin the apartme nt but slave extensions 2-4 will be able to intercommunicate with each other.
Loading...
+ 42 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use