TD 1632
VIDEO DISTRIBUTION AMPLIFIER
OPERATING INSTRUCTIONS
v1.0
CONTENTS
Safety precautions....................................................................................................................2
Preface......................................................................................................................................3
Features....................................................................................................................................3
Precautions...............................................................................................................................3
Controls and connectors...........................................................................................................4
Front panel.........................................................................................................................4
Rear panel .........................................................................................................................4
Connections..............................................................................................................................4
Specifications............................................................................................................................5
Installation.................................................................................................................................5
Jumper settings..................................................................................................................5
Trimmer adjustments.........................................................................................................7
SAFETY PRECAUTIONS
In order to prevent any fatal accidents caused
by misoperation or mishandling of the video
distribution amplifier, be fully aware of all the
following precautions.
WARNING:
THIS APPARATUS MUST BE EARTHED
WARNING:
To prevent fire or shock hazard, do not
expose this appliance to rain or moisture.
This unit is produced to comply with
Directives 93/68/EEC (IEC Publ.65) and
89/336/EEC.
2
PREFACE
The TD 1632 is a high quality video
distribution amplifier with thirty-two video
outputs. Internal jumpers allows the
distribution of four video input to eight video
outputs, eight video inputs to four video
outputs or sixteen video inputs to two video
outputs.
Standard BNC type input and output
connectors enables the TD 1632 to be used
with other CCTV amplifiers, switchers,
cameras, monitors and video recorders.
FEATURES
•
4 (8, 16) video inputs
• 4 x 8 (8 x 4, 16 x 2) video outputs
• internal programmable
• linear gain adjustment
• universal power supply
• rack mountable
PRECAUTIONS
Use only the power source specified on the
•
rating label located on rear of the cabinet.
• When not using this unit for a long period
of time, or when cleaning it, be sure to
disconnect the power plug from the AC
outlet.
• Do not drop metallic parts through slots.
This action could permanently damage this
unit. Do turn power off immediately and
refer servicing to qualified service
personnel.
• Avoid using this unit under the following
conditions:
-in extremely hot, cold or humid places,
-in dusty places,
-near appliances generating strong
magnetic fields,
-in places subject to direct sunlight, and
-in badly ventilated places.
• Unplug this unit from the AC outlet and
refer servicing to qualified service personnel
under the following conditions:
-when the power cord is frayed or plug is
damaged
-If the unit does not operate normally
following the operating instructions
-if the unit has been dropped or the cabinet
has been damaged
-when the unit exhibits a distinct change in
performance.
3