Videoswitch Vi400-G300-12e, Vi600, Vi400-G300-16e, Vi600-G320-9e, Vi600-G320-16e User Manual

...

Vi400/Vi600 Digital Recorder

User Manual

Models covered by this manual

Hard Drive

Capacity

12 Camera

Vi400

16 Camera

Vi400

9 Camera

Vi600

16 Camera

Vi600 160 Gbytes Vi400-G160-12e Vi400-G160-16e 250 Gbytes Vi400-G250-12e Vi400-G250-16e 300 Gbytes Vi400-G300-12e Vi400-G300-16e 320 Gbytes

Vi600-G320-9e Vi600-G320-16e 400 Gbytes Vi400-G400-12e Vi400-G400-16e 480 Gbytes

Vi600-G480-9e Vi600-G480-16e 500 Gbytes Vi400-G500-12e Vi400-G500-16e 750 Gbytes

Vi600-G750-9e Vi600-G750-16e 900 Gbytes

Vi600-G900-9e Vi600-G900-16e

1200 Gbytes

Vi600-G1200-9e Vi600-G1200-16e

1500 Gbytes

Vi600-G1500-9e Vi600-G1200-16e

Document Reference

Date Firmware

Vi604e.doc 27/10/2005 From Vi011b01/Vi013b01

Videoswitch

Telephone 01252-851510

Ocean House, Redfields Industrial Park Fax 01252-851296 Redfields Lane, Church Crookham Email sales@videoswitch.co.uk Hants GU52 0RD Web www.videoswitch.co.uk

Vi604e.doc

Digital Recorder

Contents:

1 Start Here ..................................................................1

1.1 Connecting Up Vi400.............................................................................................................2

1.2 Connecting Up Vi600.............................................................................................................3

1.3 Setting Date/Time ..................................................................................................................4

1.4 Recording...............................................................................................................................5

1.5 Routine Checks......................................................................................................................5

1.6 Care of the Hard Drive(s).......................................................................................................5

1.7 Critical Alerts..........................................................................................................................6

2 LIVE ...........................................................................7

2.1 Viewing Full Screen Images ..................................................................................................7

2.2 Quad Display..........................................................................................................................7

2.3 Multi-Screen...........................................................................................................................8

2.4 Spot monitor...........................................................................................................................8

3 FIND...........................................................................9

3.1 FIND-1 Date/Time..................................................................................................................9

3.2 FIND-2 Sweep......................................................................................................................10

3.3 FIND-3 Event List.................................................................................................................11

3.4 FIND-4 Incidents..................................................................................................................12

4 PLAY........................................................................13

4.1 Play Events..........................................................................................................................14

4.2 Play Incidents.......................................................................................................................14

5 BURN.......................................................................15

5.1 BURN-1 Edit Incident...........................................................................................................15

5.2 BURN-2 Multiple Incidents...................................................................................................16

6 PSW (Passwords)...................................................17

6.1 Log-On.................................................................................................................................17

6.2 Log-Off.................................................................................................................................18

7 FN (Functions)........................................................19

7.1 Using Functions ...................................................................................................................19

7.2 Repeating last used Function ..............................................................................................19

7.3 List of Functions...................................................................................................................20

8 INFO.........................................................................22

8.1 INFO-1 Configuration...........................................................................................................22

8.2 INFO-2 Status......................................................................................................................22

8.3 INFO-3 Drives......................................................................................................................22

8.4 INFO-4 Record.....................................................................................................................22

8.5 INFO-5 Play .........................................................................................................................22

9 MENU.......................................................................23

9.1 Date/Time.............................................................................................................................24

9.1.1 Date/Time ........................................................................................................................24

9.1.2 Summer/Winter Time....................................................................................................... 25

9.2 Record..................................................................................................................................25

9.2.1 Normal Record Mode.......................................................................................................25

9.2.1.1 Days ...............................................................................................................25

9.2.1.2 Cameras.........................................................................................................26

9.2.1.3 Quality ............................................................................................................26

9.2.1.4 Image Size Control.........................................................................................26

Digital Recorder

9.2.1.5 Audio Sensitivity.............................................................................................26

9.2.1.6 Record Timers................................................................................................27

9.2.1.6.1 Weekday 27

9.2.1.6.2 Weekend 27

9.2.2 Custom Record Mode......................................................................................................27

9.2.2.1 Rate................................................................................................................27

9.2.2.2 Cameras.........................................................................................................27

9.2.2.3 Custom Record Timers ..................................................................................27

9.2.2.3.1 Weekday 27

9.2.2.3.2 Weekend 27

9.2.3 Activity/Alarm Record Mode.............................................................................................27

9.2.3.1 Rate................................................................................................................27

9.2.3.2 Cameras.........................................................................................................27

9.2.3.3 Record Options .............................................................................................. 28

9.2.3.4 Storage Allocation..........................................................................................28

9.3 Display .................................................................................................................................29

9.3.1 Keypad Brightness...........................................................................................................29

9.3.2 Titles ................................................................................................................................29

9.3.2.1 Digital Recorder Title......................................................................................29

9.3.2.2 Camera Titles.................................................................................................29

9.3.2.3 Text Alignment ...............................................................................................30

9.3.2.4 Time/date Alignment ......................................................................................30

9.3.3 Auto Seq Dwell - Main .....................................................................................................30

9.3.3.1 Sequence Mode .............................................................................................30

9.3.3.2 Camera List....................................................................................................30

9.3.3.3 Dwell Times....................................................................................................30

9.3.4 Auto Seq Dwell - Spot ......................................................................................................30

9.3.4.1 Sequence Mode .............................................................................................30

9.3.4.2 Camera List....................................................................................................30

9.3.4.3 Dwell Times....................................................................................................30

9.3.5 Pip Mode..........................................................................................................................30

9.3.6 Day/Night Options ............................................................................................................31

9.3.6.1 Day/Night Timers............................................................................................31

9.3.6.2 Day Settings...................................................................................................31

9.3.6.2.1 Spot Camera 31

9.3.6.2.2 Sequence Spot 31

9.3.6.3 Night Settings.................................................................................................31

9.3.6.3.1 Spot Camera 31

9.3.6.3.2 Sequence Spot 31

9.3.7 Power Up Options............................................................................................................31

9.3.7.1 Main Monitor Mode.........................................................................................31

9.3.7.2 Sequence Main ..............................................................................................31

9.3.7.3 Main Camera..................................................................................................31

9.3.7.4 PIP Camera....................................................................................................31

9.4 Alarms..................................................................................................................................32

9.4.1 Alarm Inputs.....................................................................................................................32

9.4.1.1 Alarm Polarities ..............................................................................................32

9.4.1.2 Camera Mapping............................................................................................32

9.4.1.3 Preset Mapping ..............................................................................................32

9.4.1.4 Alarm Timers..................................................................................................32

9.4.1.4.1 Weekday Alarm Times 32

9.4.1.4.2 Weekend Alarm Times 32

9.4.1.5 Enable All Day................................................................................................32

9.4.2 Activity Detection .............................................................................................................32

Digital Recorder

iii

9.4.2.1 Activity Zones.................................................................................................32

9.4.2.2 Activity Timers................................................................................................33

9.4.2.2.1 Weekday Alarm Times 33

9.4.2.2.2 Weekend Alarm Times 33

9.4.2.3 Enable All Day................................................................................................33

9.4.2.4 Display Active Pixels......................................................................................33

9.4.3 Wireless PIR Inputs .........................................................................................................33

9.4.3.1 Enable PIRs 1-16 ...........................................................................................33

9.4.3.2 Enable PIRs 17-32.........................................................................................33

9.4.3.3 Enable PIRs 33-48.........................................................................................33

9.4.3.4 Enable PIRs 49-64.........................................................................................33

9.4.3.5 Camera Mapping............................................................................................33

9.4.3.6 Preset Mapping ..............................................................................................34

9.4.3.7 Wireless PIR Timers.......................................................................................34

9.4.3.7.1 Weekday Wireless PIR Times 34

9.4.3.7.2 Weekend Wireless PIR Times 34

9.4.3.8 Enable All Day................................................................................................34

9.4.4 Critical Alerts....................................................................................................................34

9.4.4.1 Cameras.........................................................................................................34

9.4.5 Clear Event List................................................................................................................34

9.4.6 Pull-Up Settings...............................................................................................................34

9.4.6.1 Pull-Up Monitor...............................................................................................34

9.4.6.2 Pull-Up Hold Time ..........................................................................................34

9.4.6.3 Sequence Time ..............................................................................................34

9.4.6.4 Relay Hold Time.............................................................................................35

9.4.6.5 Restore after Activity/Alarm............................................................................35

9.5 Domes..................................................................................................................................36

9.5.1 Preset Programming........................................................................................................36

9.5.1.1 Dwell/Speed/Tour Settings.............................................................................36

9.5.1.1.1 Dwell Time 36

9.5.1.1.2 Speed 36

9.5.1.1.3 Include preset in tour 36

9.5.1.2 Go to Preset ...................................................................................................36

9.5.1.3 Set Preset.......................................................................................................36

9.5.2 Tour Programming...........................................................................................................36

9.5.2.1 Dwell/Speed Settings .....................................................................................36

9.5.2.1.1 Dwell Time 36

9.5.2.1.2 Speed 36

9.5.2.2 Start Programming Tour.................................................................................36

9.5.2.3 Add preset to Tour..........................................................................................36

9.5.2.4 Finish Programming Tour...............................................................................36

9.5.3 Protocol Set-Up................................................................................................................36

9.5.3.1 DOMES-1 protocol (twisted pair)....................................................................36

9.5.3.2 DOMES-2 protocol (twisted pair)....................................................................37

9.5.3.3 Up-the-coax Protocol......................................................................................37

9.5.3.4 Type of control for each camera.....................................................................37

9.6 Network................................................................................................................................37

9.6.1 IP Address .......................................................................................................................37

9.6.2 Port ..................................................................................................................................37

9.6.3 Sub-Net mask ..................................................................................................................37

9.6.4 Gateway...........................................................................................................................37

9.6.5 PSTN Rings .....................................................................................................................38

9.6.6 RS232 Baud Rate............................................................................................................38

Configuration........................................................................................................................................39

Digital Recorder

9.6.7 Passwords .......................................................................................................................39

9.6.7.1 Logged-Off Access Rights..............................................................................39

9.6.7.2 User 1.............................................................................................................39

9.6.7.2.1 User 1 Password 39

9.6.7.2.2 User 1 Access Rights 40

9.6.7.3 User 2.............................................................................................................40

9.6.7.3.1 User 2 Password 40

9.6.7.3.2 User 2 Access Rights 40

9.6.7.4 User 3.............................................................................................................40

9.6.7.4.1 User 3 Password 40

9.6.7.4.2 User 3 Access Rights 40

9.6.7.5 User 4.............................................................................................................40

9.6.7.5.1 User 4 Password 40

9.6.7.5.2 User 4 Access Rights 40

9.6.8 Camera Inputs .................................................................................................................40

9.6.8.1 Brightness ......................................................................................................40

9.6.8.2 Colour Boost...................................................................................................41

9.6.8.3 Termination ....................................................................................................41

9.6.9 Camera Inputs .................................................................................................................42

9.6.9.1 Record Brightness..........................................................................................42

9.6.9.2 Record Colour Boost......................................................................................42

9.6.10 Record Audio...................................................................................................................42

9.6.11 Restore Factory Config....................................................................................................43

9.6.12 Erase Hard Drive .............................................................................................................43

9.6.13 Multi-Unit Configuration ...................................................................................................44

9.6.13.1 Unit Number ...................................................................................................44

9.6.13.2 Number of Linked unit ....................................................................................44

9.6.13.3 Connection of multiple units...........................................................................44

10 Connections............................................................45

10.1 Audio....................................................................................................................................45

10.2 Ethernet connection to a PC................................................................................................46

10.3 Ethernet connection to a LAN..............................................................................................46

10.4 Ethernet connection to Broadband ......................................................................................47

10.5 Remote Keyboard................................................................................................................47

10.6 Dial-Up Access.....................................................................................................................48

10.6.1 Vi-PSTN...........................................................................................................................48

10.6.2 Vi-ISDN and Vi-ISDN/TA .................................................................................................48

10.6.3 Connecting a Dial-up Adaptor..........................................................................................48

10.7 Wireless PIR........................................................................................................................49

11 Technical Data........................................................50

11.1 Power-On Reset ..................................................................................................................50

11.2 Accessories Included...........................................................................................................50

11.3 Changing the Hard Drive .....................................................................................................50

11.4 Connector Pin-Outs.............................................................................................................51

11.4.1 Alarms..............................................................................................................................51

11.4.2 Relays..............................................................................................................................52

11.4.3 Remote Keyboards ..........................................................................................................53

11.4.4 PSTN/ISDN Modem.........................................................................................................54

11.5 Specifications.......................................................................................................................55

11.5.1 Storage ............................................................................................................................55

11.5.2 Digital recording/Replay...................................................................................................55

1.1.1 Display.............................................................................................................................55

1.1.2 Control and Interface .......................................................................................................55

Digital Recorder

11.5.3 Dome Control...................................................................................................................56

11.5.4 Remote Viewing...............................................................................................................56

11.5.5 Power, Physical & Environmental....................................................................................57

1.1.3 Upgrades .........................................................................................................................57

11.5.6 CE Marking......................................................................................................................58

11.5.7 Ventilation........................................................................................................................58

11.5.8 Safety...............................................................................................................................58

12 Warranty Fax-Back.................................................61

Digital Recorder

1 Start Here

Please fill in the warranty fax-back form on page 61 and return it to Videoswitch

• The Vi400/Vi600 is designed to be easy to use whilst offering high quality digital video recording and playback, primarily for CCTV security applications.

• The video images from all connected cameras are continuously recorded onto the built-in hard drives. When the drives are full, the Vi400/Vi600 keeps on recording, overwriting the oldest images.

• Images are retained for a specified user programmable number of days, typically

31. All images recorded within the period will be available for replay. Older image are no longer available.

• Several methods are provided for finding the recorded images you want quickly.

• The built-in CD writer allows a selected part of the recorded information to be

written onto a CD, typically to back-up an incident for use as evidence by the Police.

• The recording process continues all the time, even when playing back or writing to CD.

• An optional dial-up module allows images to be viewed on a PC (with a modem) via a telephone line.

• Audio and ethernet are standard features.

• The main differences between the Vi400 and the Vi600 is that the latter has 3 hard

drives instead of one and also has video loop-through BNC connectors.

Digital Recorder

1.1 Connecting Up Vi400

For a standard digital recording system you will need  The Vi400 recorder  Some cameras with lenses  A video monitor (with S-video or BNC composite video input).  BNC cables

ETHERNET

RELAYS/DOMES

ALARM

INPUTS

ISDN/PSTN

RS232 PORT

MAINS

VOLTAGE

SELECTOR

MAINS

POWER

INPUT

MICROPHONE

INPUT

LINE

INPUT

LINE

OUTPUT

CAMERA

INPUT 16

CAMERA

INPUT 1

SPOT

MONITOR

MAIN

MONITOR

(BNC)

LOOP TO MAIN KEYBOARD OF

NEXT UN I T

LOOP TO

SPOTKEYBOARD

OF NEXT UNIT

MAIN MONITOR (S-VIDEO)

IBM

KEYBOARD

GPS

RECEIVER

NOT

USE D

NOT

USE D

NOT

USE D

MAIN

KEYBOARD

SPOT

KEYBOARD

 Connect the monitor output (MAIN) of the Vi400 to a Video Monitor using a BNC or S-

Video cable (supplied).  Make sure that the monitor termination is switched on (i.e. to 75 Ohms)  Connect a camera to Camera Input 1 on the Vi400 using a BNC cable  Connect further cameras to Inputs 2,3,4 etc  Make sure that the voltage select switch is set to suit the mains supply. The setting

required in UK and Europe is normally 230Vac.  Connect the mains power using the mains cable provided

Digital Recorder

1.2 Connecting Up Vi600

For a standard digital recording system you will need  The Vi600 recorder  Some cameras  A video monitor (with S-video or BNC composite video input).  BNC cables

MAINS

POWER

INPUT

MICROPHONE

INPUT

LINE

INPUT

LINE

OUTPUT

CAMERA INPUT 16

CAMERA

LOOPTHROUGHS

1-16

CAME RA

INPUT 1

SPOT

MONITOR

LOOP TO MAIN

KEYBOARD OF

NEXT UNIT

IBM

KEYBOARD

NOT

USED

SPOT

KEYBOARD 2

TILL IN PUTS

MAIN

KEYBOARD

SPOT

KEYBOARD 1

ET HERNET

RELAYS/DOMES

ALARM

INPUTS

ISDN/PSTN

RS232 PORT

MAIN

MONITOR

(BNC)

LOOP TO SPOT

KEYBOARDS OF

NEXT UNIT

MAIN MONITOR (S-V IDEO)

GPS

RECEIVER

MICROPHONE

LINE IN

LINE OU T

 Connect the monitor output (MAIN) of the Vi600 to a Video Monitor using a BNC or S-

Video cable (supplied).  Make sure that the monitor termination is switched on (i.e. to 75 Ohms)  Connect a camera to Camera Input 1 on the Vi600 using a BNC cable  Connect further cameras to Inputs 2,3,4 etc  Make sure that the voltage select switch is set to suit the mains supply. The setting

required in UK and Europe is normally 230Vac.  Connect the mains power using the mains cable provided

Digital Recorder

1.3 Setting Date/Time

For proper operation of the Vi400/Vi600 Digital Recorder it is essential that the date and time are set correctly.

If the system clock has an invalid date or time when the Vi600 is powered up (or at any time during operation), the date and time setting window will be automatically displayed

If this occurs, use the number keys to enter the date and time.

The arrow keys may be used to move the cursor to different positions if only some digits need changing:

Press OK to finish:

If you need to adjust the time and date at any other time, refer to section 9.1. Note that the time is automatically adjusted forwards or backwards by an hour at the appropriate dates to take account of British Summertime so no user action is required.

The format for the date and time is DD/MM/YY HH:MM:SS where:

• DD is the day of the month (00 to 31),

• MM is the month (01 to 12),

• YY is the year (e.g. 04 for the year 2004),

• HH is the hour in 24-hour format (00 to 23),

• MM is the number of minutes past the hour (00 to 59)

and

• SS is the number of seconds past the minute (00 to 59).

Digital Recorder

1.4 Recording

The Vi600 Digital Recorder should now be fully operational and recording images from all cameras. The default image retention period is 31 days unless set otherwise in the menu (see section 9.2.1).

1.5 Routine Checks

If the Vi600 is not recording, the message RECORDING STOPPED will be displayed on the video monitor. This should only happen if there is no video, if no hard drive is fitted or if it is faulty, or if record timers have been set to disable recording.

Although the system is intended for continuous un-attended operation, it is recommended that the user regularly check that images from all cameras replay correctly. Any potential problems with the cameras or recording system will then be detected as soon a possible, rather than continuing un-noticed until a critical incident needs to be recalled from the system.

Similarly, w hen a CD has been created you should check that it plays back correctly

, before the images on the hard drive in the Vi600 become over-written. The CD may be checked by either by playing it on the Vi600 or on a PC.

1.6 Care of the Hard Drive(s)

The hard drive is a delicate mechanical item that should be handled with care. Before moving a Vi400/Vi600 that has been powered up, remove power and wait for 30 seconds for the drive to stop spinning. This is a precaution to avoid possible damage to the hard drive.

Digital Recorder

1.7 Critical Alerts

The Vi400/Vi600 constantly monitors the hard drive, camera inputs and system so that detected fault conditions will be reported to the user as soon as possible by means of a “critical alert” message on the screen. Alerts are also added to the event list.

• FailTest This alert indicates that the self-test has failed – try the following

 Press the INFO key to call up the “INFO-2 Status” screen.

One of a number of fault conditions may be noted.

 Enter the menu, change any setting and return to LIVE

mode so that settings are saved.

 Switch off the Vi400/Vi600, wait 10 seconds and switch on

again.

 Try a power-on reset  If the problem persists, contact your supplier.

• HD1,2,3 Fail This alert indicates that the hard drive is not working.

 Check that the drive drawer is correctly fitted  Check the lock in the drive drawer is turned full counter-

clockwise

 Check the DISC ACTIVITY LED is flickering  Check that the red DISC POWER led it lit.

• HD1,2,3 SMART This alert indicates that the hard drive may stop working soon

• The SMART monitoring detects imminent failure of a hard

drive, so if this warning occurs, the drive should be changed at the earliest opportunity.

To cancel a critical alert, press the FIND key several times until the “FIND-3 Event” screen is displayed.

FIND

The time of alert will be displayed on the list (see section 3) and the alert will be cancelled. Note that if the alert condition persists, the alert message will re-appear.

Digital Recorder

2 LIVE

Press this key to view live images on the main monitor.

LIVE

This key may be pressed at any time to exit from any other screen.

2.1 Viewing Full Screen Images

Select full screen views of different cameras on the main monitor by pressing the NUMBER keys:

To step forwards or backwards through the cameras displayed on the main monitor, press one of these keys:

DEC

INC

2.2 Quad Display

Select quad display on the main monitor by pressing the QUAD key. Cameras 1, 2, 3 and 4 will be displayed together.

Press again to see cameras 5, 6, 7 and 8. Successive presses will select the next set of four camera images.

Press a number key to revert to full screen display of one camera.

To select cameras 1 to 9 either press the required number and wait a moment for the camera to select, Alternative, enter 01, 02, 03 etc.

To select cameras 10 to 16, enter the number 10 to 16;

If you select a camera number above 16, this will select cameras on other linked V i400’s if they are present.

Digital Recorder

2.3 Multi-Screen

Select 9-camera Multi-Screen display on the main monitor by pressing the MULTISCREEN key. Press again to display a 16-camera multi-screen image.

Press a number key to revert to full screen display of one camera.

2.4 Spot monitor

To step forwards or backwards through the cameras displayed on the spot monitor, press one of these keys:

BACK

DEF

Digital Recorder

3 FIND

If there is a CD in the CD drive with previously stored images on it, the Vi400/Vi600 will replay from the CD. Otherwise, the Vi400/Vi600 will replay from the built-in hard drive.

3.1 FIND-1 Date/Time

This mode finds images by date and time. Press this key to enter the Date/Time search mode:

FIND

Use the NUMBER keys to enter any date and time for which there is still video available.

Scroll through dates and times using the ARROW keys:

When you have found what you want, use the play keys to view the video:

Note that as any digit of the date and time is changed, the corresponding image is immediately found on the hard drive and displayed.

This is the “active search” facility.

The format for the date and time is DD/MM/YY HH:MM:SS where:

• DD is the day of the month (00 to 31),

• MM is the month (01 to 12),

• YY is the year (e.g. 04 for the year 2004),

• HH is the hour in 24-hour format (00 to 23),

• MM is the number of minutes past the hour

(00 to 59) and

• SS is the number of seconds past the minute (00 to 59).

Sometimes it is useful to press the DEF key when in search mode, to call up the latest available recorded images

Digital Recorder

3.2 FIND-2 Sweep

An alternative to the date/time search is the sweep facility. Press this key until the sweep mode is displayed:

FIND

Use these keys to scan through the whole range of recorded images:

To quickly step between start, middle and end, press this key:

DEF

When you have found what you want, use the play keys to view the video:

To step in finer time increments, press the OK key to access the fine mode.

Note that the slider changes from a solid block to a magnifying glass icon.

Press again to cancel.

Digital Recorder

3.3 FIND-3 Event List

When activity detection or alarm contacts are being used, events will be created in the event list. This screen allows you to quickly find an event and play the video associated with it.

Press the FIND key until the FIND-3 screen is displayed:

FIND

Use the up/down keys to scroll through events and the left/right keys to select different pages of events.

Press this key to go to the latest event:

DEF

When you have found what you want, use the play keys to view the video:

Up to 480 events can be recorded before older ones are over-written.

As events are highlighted, the corresponding image will be immediately recalled and displayed.

System events and critical alerts also appear in the event list.

Entering the EVENT screen clears any critical alert conditions. If a critical alert problem still exists, new alert events will be created.

Digital Recorder

3.4 FIND-4 Incidents

If one or more incidents have been set (refer to BURN, section 5) they can be selected and replayed via this screen. This is particularly relevant when playing a CD.

Press the FIND key until the FIND-4 screen is displayed:

FIND

To select the incident you wish to replay, use these keys:

To play the incident forwards from the start, press the “play forward” key:

To play the incident backwards from the end, press the “play backwards” key:

When playing from a CD, all the stored video is within one or more incidents. This screen allows you to select which incident to play.

Digital Recorder

4 PLAY

• If there is a CD in the CD drive with previously stored images on it, the

Vi400/Vi600 will replay from the CD. If the CD has more than one incident, use the FIND-4 screen to select each incident (see section 3.4).

• If there is no CD in the CD drive, the Vi400/Vi600 will replay from the built-in

hard drive.

Having found what you want using the FIND key, you can use these keys to move forwards and backwards through the recorded video images.

The function of each key is:

Step backwards one image

Step forwards one image

Play backwards (press again to increase speed)

Play forwards (press again to increase speed)

Pause at currently displayed image

When unit is in playback mode you can also using the function menu 15 zoom command to zoom in on a specific area of replay.

View different cameras by pressing the NUMBER keys:

Press the forward or reverse play keys repeatedly to increase the replay speed.

Digital Recorder

4.1 Play Events

Press these keys to step backwards or forwards through events in the event list:

4.2 Play Incidents

Press these keys to step backwards or forwards through incidents in the incidents list:

+ 49 hidden pages

Videoswitch Vi400-G300-12e, Vi600, Vi400-G300-16e, Vi600-G320-9e, Vi600-G320-16e User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual