Aurora,Ohio 44202
Fax: 330-562-1999
VPI
VIDEO
PRODUCTS
INCORPORATED
1275 Danner Drive
Tel: 330-562-7070
www.vpi.us
INSTALLATION GUIDE FOR THE
SE-SV-2-LC
INTRODUCTION
The SE-SV-2-LC S-Video Switch allows two S-Video sources to be switched between a single S-video display. The S-video may come from
sources such as a PC, DVD player, satellite receiver, or VCR to name a few. With 150 MHz bandwidth, the SE-SV-2-LC supports standard Svideo resolution–up to 800 x 600.
INSTALLATION
1. Turn OFF power to sources and display.
2. Connect the SVEXT-3-MM S-video cable (supplied) from the display to the female connector labeled "S-VIDEO OUT" on the SE-SV-2-LC.
3. Install one male end of another SVEXT-x-MM cable (not supplied) into a source’s S-video output connector.
4. Install the other male end of the same SVEXT-x-MM cable into the female connector labeled "S-VIDEO IN 1" on the SE-SV-2-LC.
5. An additional S-video source may be plugged into the remaining female connector labeled "S-VIDEO IN 2" as required.
6. Plug in the AC adapter and connect it to the SE-SV-2-LC.
7. Turn ON power to the sources and display.
Note: Additional S-video cable lengths (SVEXT-xx-MM where xx is the length of the cable in feet) may be ordered from Video Products
Inc by calling (800) 626-7801 (U.S) or 330-562-7070 or visit our website at www.vpi.us.
PC, DVD, Satellite,
or VCR
S-Video Cable
(not supplied)
PC, DVD, Satellite,
or VCR
Left End View of SE-SV-2-LC
S-Video Cable
(not supplied)
S-VIDEO
IN 1
R
VPI
S-VIDEO
IN 2
Video Prod ucts I nc
SE-SV-2-LC
Top View of SE-SV-2-LC
Right End View of SE-SV-2- LC
5V
0.5A
OUT
S-VIDEO
SVEXT-3-MM
(supplied)
SELECT
AC Adapter
(supplied)
OPERATION
Press the select button to switch between connected S-video sources.
TROUBLESHOOTING
PROBLEM SOLUTION
No Video • Connect power to SE-SV-2-LC
Poor Resolution • Make sure the display is plugged into S-
• Cable connections not secure
VIDEO OUT on the SE-SV-2-LC
Technical Specifications
General
Description Specification
Signal Type S-Video
Connector 4-pin miniDIN
Max. Input Levels Y:
C:
Max. Output Levels Y:
C:
Input / Ouput Impedance 75 Ohms
Maximum Resolution 800 x 600
Power 110 or 220VAC at 50 or 60 Hz-
Size (In.) W x D x H 3.7 x 2.1 x 1.15
1.0 Vp-p
0.286 Vp-p
1.0 Vp-p, +/- 2%
0.286 Vp-p +/- 2%
5VDC/.5A AC adapter
Input / Output Signals
Pin # Signal Pin # Signal
1 Y-Ground 3 Y
2 C-Ground 4 C
WARRANTY INFORMATION
The warranty period on this product (parts and labor) is one (1) year from date of purchase. Please contact Video Products Inc at (800) 626-7801
or 330-562-7070 for information regarding repairs and/or returns. A return authorization number is required for all repairs/returns.
COPYRIGHT
Copyright 2003 by Video Products Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of Video
Products Inc, 1275 Danner Drive • Aurora, OH 44202.
CHANGES
The material in this guide is for information only and is subject to change without notice. Video Products Inc reserved the right to make changes in
the product design without reservation and without notification to its users.
MODEL NO: SE-SV-2-LC
SERIAL NO: _________________________
DATE: _________________________
INSPECTED BY: _________________________
MAN043 Revised 7/29/2003