VIDEOMAN VS-747, VS-747M, VS-747C, VS-747PS User Manual
VS-747 Kit VS-747M
Inc. VS-747M, VS-747C,VS-747PS Inc. VS-747M, VS-747PS
VIDEMAN is a registered trade mark of EOS Australia Pty Ltd
Designed, imported and distributed by Videoman Systems Co.
VS-747
FEATURES
■ 15 DIFFERENT RINGTONE
■ UP TO 4 MONITORS, 4 OUTDOOR STATIONS AND 4 AUDIO
HANDSETS
■ INTERCOMMUNICATION IN BETWEEN HANDSETS
- Page 1 –
Indoor monitor VS-747M installation guide
Install the indoor monitors about 1.55M ~ 1.60M from
the floor.
VS-747C Door station inst allation guide
Surface mount with optional VS-747C
4B3Y2W1R LB
1
2
3
155 Cm
Fig. 3
Flush mount with optional VS-747CS
Fig. 4
160 Cm
1
3
0
m
m
200mm
175mm
7
0
m
m
1
0
0
m
m
Ref. No: VS-902EB
Install the door stations about 1.55M ~ 1.60M from the
ground.
Keep the units away from snow, rain and direct sunlight.
Fig 1
Fig 3
Fig 2
- Page2 -
Description of monitor VS-747M features
Dim ensions：166(W)×210(H)×49(D ) mm
1. Microphone
2. Blue LED
3. TALK Button
4. CALL Button
5. UNLOCK Button
6. MONITOR Button
7. FUNCTION Button
8. LED for Door Release
9. LED for IN-use
10. Speaker
11. B&w CRT Screen
12. Image adjustment
13. Talk volume adjustment
14. Ring volume adjustment
15. Wiring Terminals
16. Mounting Blacket Hold
Fig 4
Dimension: 166(W) x 210(H) x 49(D) mm
Descriptions of Door Station VS-747 C features
3
5
4
2
2W1R 3Y 4B LB
8
7
6
Dimension: 128(H)x98(W)x43(D)
1
Fig. 9
4B3Y2W1R LB
1
2
3
Common - Black
N.O. - Red
N.C. - White
1R +12V DC presents when outdoor station being called or
supervised.
2W Ground (GND)
3Y Video signal (1Vp-p)
4B Audio and control signal
1. Camera
2. IR LEDs for night vision
3. Speaker
4. CALL button
5. Microphone
6. Cable terminal to monitor
7. Unlock port LB – The characteristic of this
port out is determined by JP-LK Jumper
on back of monitor (Refer to Page2 #15,
Page6 Note1,2,3)
With Jumper : Additional power
supply is not required for door latch
Without Jumper : Additional power
supply is not required for door latch
Pin#1 (Top - Red): Normally Open
Pin#2 (Middle-Black): Common
Pin#3 (Bottom-White ): Normally Close
8. Mounting bracket
Descriptions of Stainless Steel Flush mount Door Station
Overall Dimension (mm):
200(H)x130(W)x50(D)
Cut Out size without embedding box:
100(W) x 130(H) x 60(D)
Cut Out size with embedding box:
175(H)x100(W)x70(D)
LA 2W1R 3Y 4B LB
3
5
4
2
1
Fig. 10
1. Camera
2. IR LEDs for night vision
3. Speaker
4. Call button
5. Microphone
NOTE : This camera can be used with optional
embedding box (Ref.VS-902EB), Refer to Page1.
- Page 3 -
Fig 5
Fig 6
Loading...