Videology 40VM12H Owner's Manual

40VM12H

INS-40VM12H 12/06/07 Rev A

12” B/W CRT Monitor

OWNER’S MANUAL

IMAGING SOLUTIONS INC.

IMAGING SOLUTIONS INC.

®

Please also visit our WEB-site at: http://www.videologyinc.com

Please note that data in this application note is subject to change

without notification!

Videology Imaging Solutions Inc. is an ISO 9001 registered

video camera developer and manufacturer serving security,

industrial and machine vision, biometric and specialty OEM markets.

The main facility is based in Greenville, Rhode Island, USA and

Videology Imaging Solutions BV is located in Uden The Netherlands.

The company designs, develops, manufactures and distributes

video, image acquisition and display products.

To contact Videology Imaging Solutions:

Europe:

Videology Imaging Solutions Europe
Liessentstraat 2-B
NL-5405 AG Uden
The Netherlands
Tel: [phone]
Fax: [phone]

USA:

Videology Imaging Solutions Inc.
37M Lark Industrial Parkway
Greenville, RI 02828
USA
Tel: [phone]
Fax: [phone]

1

CONTENTS

6

Description & features

Caution

Identification & Operation of Controls

Installation

Operation

Maintenance

........................................ 2

............................................................. 2

.................. 3-4

......................................................... 5-6

.......................................................... 6

...................................................... 6

(A) To reduce the risk of fire or ELECTRIC SHOCK HAZARD.

Don't expose this equipment to rain or moisture.

(B) The socket-outlet shall be installed near the equipment &

shall be easily accessible.

WARNING

1. Install the monitor as outlined in the section titled “INSTALLATION”. Be sure
that the termination switch is set to “75 OHMS” as required, and that a standard

1.0Vp-p video signal is applied to the monitors VIDEO INPUT.

2. To turn the monitor on, press the “POWER” switch. Observe that the LED power
indicator illuminates.

3. Adjust the brightness and contrast controls to obtain optimum picture quality.

4. The monitor should now be displaying a bright, clear picture. Should poor
picture quality be observed make sure to check the camera or other video
source for proper adjustment.

OPERATION

With the exception of the picture tube, the monitor incorporates all solid state circuitry.
General maintenance, therefore, will not be required.

However, for optimum picture clarity, it is recommended that the viewing screen be
periodically wiped clean with a damp cloth.

MAINTENANCE