![](/html/91/91f5/91f5d51f46d70ff1a553a6dc2d5f8c1076ffc26f967d40eb6a0303d6627ad071/bg1.png)
Doc # INS-24RS2.0SW-EXSDI
Videology® Imaging Solutions, Inc.
Videology® Imaging Solutions, Europe B.V.
37M Lark Industrial Parkway
Greenville, Rhode Island 02828 USA
Tel: (401) 949 – 5332 Fax: (401) 949 – 5276
Americas, Middle East, Far East & Australia sales:
sales@videologyinc.com
Neutronenlaan 4
5405 NH Uden, The Netherlands
Tel: +31 (0) 413 256261 Fax: +31 (0) 413
251712
Europe & N. Eurasia sales:
info@videology.nl
Instruction Manual
24RS2.0XW-EXSDI
IMAGING SOLUTIONS INC.
Original Equipment Manufacturer
Prior to Using This Document: Videology reserves the right to modify the information in this
document as necessary and without notice. It is the user’s responsibility to be certain they possess the
most recent version of this document by going to www.videologyinc.com, searching for the model
number, and comparing revision letters on the respective document, located in the document’s footer.
For technical assistance with this product, please contact the supplier from whom the product was
purchased.
![](/html/91/91f5/91f5d51f46d70ff1a553a6dc2d5f8c1076ffc26f967d40eb6a0303d6627ad071/bg2.png)
Doc # INS-24RS2.0SW-EXSDI
License Agreement (Software):
This Agreement states the terms and conditions upon which Videology Imaging Solutions, Inc. USA and
Videology Imaging Solutions, B.V. Europe (hereafter referred to as "Videology®") offer to license to you the
software together with all related documentation and accompanying items including, but not limited to,
the executable programs, drivers, libraries, and data files associated with such software.
The Software is licensed, not sold, to you for use only under the terms of this Agreement.
Videology grants to you, the purchaser, the right to use all or a portion of this Software provided that the
Software is used only in conjunction with Videology's family of products.
In using the Software you agree not to:
Decompile, disassemble, reverse engineer, or otherwise attempt to derive the source code for any
Product (except to the extent applicable laws specifically prohibit such restriction);
Remove or obscure any trademark or copyright notices.
Limited Warranty (Hardware and Software):
ANY USE OF THE SOFTWARE OR HARDWARE IS AT YOUR OWN RISK. THE SOFTWARE IS PROVIDED FOR
USE ONLY WITH VIDEOLOGY'S HARDWARE. THE SOFTWARE IS PROVIDED FOR USE "AS IS" WITHOUT
WARRANTY OF ANY KIND, TO THE MAXIMUM EXTENT PERMITTED BY LAW, VIDEOLOGY DISCLAIMS ALL
WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY, QUALITY AND FITNESS FOR A PARTICULAR
APPLICATION OR PURPOSE. VIDEOLOGY IS NOT OBLIGATED TO PROVIDE ANY UPDATES OR UPGRADES
TO THE SOFTWARE OR ANY RELATED HARDWARE.
Limited Liability (Hardware and Software):
In no event shall Videology or its Licensor's be liable for any damages whatsoever (including, without
limitation, incidental, direct, indirect, special or consequential damages, damages for loss of business
profits, business interruption, loss of business information, or other pecuniary loss) arising out of the use
or inability to use this Software or related Hardware, including, but not limited to, any of Videology's
family of products.
![](/html/91/91f5/91f5d51f46d70ff1a553a6dc2d5f8c1076ffc26f967d40eb6a0303d6627ad071/bg3.png)
Doc # INS-24RS2.0SW-EXSDI
Safety Precaution
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent electric shocks and risk of fire hazards, do NOT use other than specific power source.
The symbol is intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be
of
sufficient magnitude to constitute a risk of
electric shock to persons.
The symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the unit.
Warning: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Caution: Any changes or modifications in construction of this device which are not expressly approved by
the party responsible for compliance could void the user's authority to operate the equipment.
Mains power quality should be that of a typical commercial environment. If the user of the model requires
continued operation during power mains interruptions, it is recommended that the model be powered from
an uninterruptible power supply (UPS) or a battery.
![](/html/91/91f5/91f5d51f46d70ff1a553a6dc2d5f8c1076ffc26f967d40eb6a0303d6627ad071/bg4.png)
Doc # INS-24RS2.0SW-EXSDI
Table of Contents
1. Document History .................................................................................................................... 5
2. Heading ................................................................................................................................. 5
3. Dimensions ............................................................................................................................. 5
4. OSD Menu Table ...................................................................................................................... 6
5. OSD Menu .............................................................................................................................. 7
5.1. LENS (Default: MANUAL) ................................................................................................... 7
5.1.1. DC (auto iris) ............................................................................................................. 7
5.1.2. MANUAL .................................................................................................................... 7
5.2. FOCUS ASt. ...................................................................................................................... 7
5.3. EXPOSURE ....................................................................................................................... 7
5.3.1. BRIGHTNESS ............................................................................................................. 7
5.3.2. SHUTTER .................................................................................................................. 8
5.3.3. AGC.......................................................................................................................... 8
5.4. BACKLIGHT ...................................................................................................................... 9
5.4.1. HLC (High Light Compensation) ................................................................................... 9
5.4.2. BLC (Backlight Compensation) ..................................................................................... 9
5.4.3. WDR (Wide Dynamic Range) ..................................................................................... 10
5.5. DAY & NIGHT ................................................................................................................. 11
5.5.1. EXTERN (Not supported) ........................................................................................... 11
5.5.2. AUTO ...................................................................................................................... 11
5.5.3. COLOR (Default: COLOR) .......................................................................................... 12
5.5.4. B/W ........................................................................................................................ 12
5.6. COLOR .......................................................................................................................... 12
5.6.1. AWB (Auto White Balance) ........................................................................................ 12
5.6.2. COLOR GAIN ........................................................................................................... 12
5.7. 3D-NR (Digital Noise Reduction) ....................................................................................... 13
5.8. IMAGE ........................................................................................................................... 13
5.8.1. SHARPNESS ............................................................................................................ 13
5.8.2. GAMMA ................................................................................................................... 13
5.8.3. MIRROR .................................................................................................................. 13
5.8.4. FLIP........................................................................................................................ 13
5.8.5. ACE (D-WDR, Works in both CVBS and HD-SDI) .......................................................... 14
5.8.6. DEFOG .................................................................................................................... 14
5.8.7. PRIVACY ................................................................................................................. 14
5.9. MOTION......................................................................................................................... 15
5.9.1. DET WINDOW .......................................................................................................... 15
5.9.2. DET TONE ............................................................................................................... 15
5.9.3. MDRECT FILL ........................................................................................................... 15
5.9.4. SENSITIVITY ........................................................................................................... 16
5.9.5. MOTION OSD ........................................................................................................... 16
5.9.6. TEXT ALARM ............................................................................................................ 16
5.10. SYSTEM...................................................................................................................... 16
5.10.1. OUTPUT .................................................................................................................. 16
5.10.2. RESOLUTION ........................................................................................................... 17
5.10.3. TV SYSTEM .............................................................................................................. 17
5.10.4. LANGUAGE .............................................................................................................. 17
5.10.5. CAM TITLE .............................................................................................................. 17
5.10.6. RESET .................................................................................................................... 17
5.11. EXIT .......................................................................................................................... 17
5.11.1. SAVE ...................................................................................................................... 17
5.11.2. CANCEL .................................................................................................................. 17
6. Specifications ........................................................................................................................ 18
7. Contact Information ............................................................................................................... 19
![](/html/91/91f5/91f5d51f46d70ff1a553a6dc2d5f8c1076ffc26f967d40eb6a0303d6627ad071/bg5.png)
Doc # INS-24RS2.0SW-EXSDI
1. Document History
2. Heading
• Ultra low light performance with SONY’s STARVIS sensor
• Color 0.005 LUX, B/W 0.0001 LUX
• Full HD 2MP HD-SDI/ EX-SDI camera
• 1920x1080 @ 30/25fps
• 1080p, 720p or CVBS selectable
• True WDR @ 30/25fps
• ROI (Region of Interest) WDR mode (adds additional scene quality optimization)
• NTSC/PAL** changeable via OSD
• Functions and OSD Control
- Motion Detection, Privacy Mask, Defog, Sens-up (32x), ACE (D-WDR), Sharpness, Deblur,
Mirror/Flip, BLC/HLC, Anti-saturation, Smart IR, Title Set
• Power 12VDC polarity protected
**specify N for NTSC preset, P for PAL preset within model number when ordering
3. Dimensions
(Unit: mm)
![](/html/91/91f5/91f5d51f46d70ff1a553a6dc2d5f8c1076ffc26f967d40eb6a0303d6627ad071/bg6.png)
Doc # INS-24RS2.0SW-EXSDI
4. OSD Menu Table
MODE (INDOOR, OUTDOOR, DEBLUR)
1/30, 1/60, 1/200, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/8000, 1/1500, 1/3000
1/25, 1/50, 1/100, 1/200, 1/400, 1/800,
1/1600, 1/3200, 1/6400, 1/12800, 1/25600
OFF, x2, x4, x8, x16, x32
WINDOW ZONE/USE, H/V-POS, H/V-SIZE
SMART IR, ANTI-SAT., D>N THRES, N>D THRES, DELAY
SMART IR, ANTI-SAT., AGC THRES, AGC MARGIN, DELAY
AUTO, AUTOext, PRESET, MANUAL (C-TEMP, R/B-GAIN)
ANALOG OUT0, ANALOG OUT1, SDI OUTPUT
HD-SDI, EX-SDI 1.0, EX-SDI 2.0, OFF
OFF, ON
MODE (AUTO, MANUAL)
LEVEL (LOW, MIDDLE, HIGH)
ZONE NUM, ZONE DISP, H/V-POS, H/V- SIZE, Y LEVEL, CB/CR LEVEL,
TRANS
WINDOW ZONE, WINDOW USE, DET H/V-POS, DET H/V-SIZE
HD-SDI, EX-SDI 1.0, EX-SDI 2.0, OFF
1080p 25/30, 720p 25/30, 720p 50/60(Cropped)
ENG, CHN(S), CHN, JPN, KOR, GER
In order to store the default settings you must click SAVE after reset is chosen
If CVBS video is enabled through ANALOG OUT0 or Sub-out port,
WDR and 3D-NR functions are disabled in all video outputs.
Camera setup menu can be accessed and controlled by OSD controller.
• EXIT: You can exit the menu with saving changed commands or by cancelling the changed
commands.
• RETURN: Returns to the previous menu.