VideoLabs Video to USB Adapter User Manual
®
Video to
USB Adapter
Software User Guide
5960 Golden Hills Drive • Minneapolis, MN 55416-1040
763-542-0061 • 800-467-7157
www.videolabs.com
®
info@videolabs.com
©2001 E.mergent, Inc. Reproduction in whole or part without written permission is prohibited. VideoLabs is a registered trademark
of E.mergent, Inc. FlexCam is a trademark of E.mergent, Inc. All other trademarks are properties of their respective owners.
Specifications subject to change without notice. Form Number VL1181/10-01
A Quick Reference for Windows® and Mac
V2.0
®
Getting Started
1. Identify the following items included in the product packaging
• VideoLabs Video to USB Adapter
• Software and driver CD (hybrid for both Mac OS
and Windows)
• USB cable
• Composite video cable
2. Turn ON your computer and follow instruction under Windows
or Mac OS.
Installing with Windows
Note: Video to USB Adapter is compatible with Windows 98/ME/2000/XP.
1. Connect the Video to USB Adapter
• Plug one end of the supplied USB cable into the Video to USB Adapter
and plug the other end into the computer’s USB ports.
• Windows will automatically find the new hardware and display the Add New
Hardware Wizard.
• Insert the supplied CD. Follow the Wizard’s on-screen instructions and
browse to the path: d:\drivers\USBadapt, substituting the letter name of the
CD-ROM drive, if necessary.
Frequently Asked Questions
Q. The Video to USB Adapter is installed – but why
can’t I see any picture?
Q. How do I know the driver for the Video to USB
Adapter has been installed properly?
Q. What about capturing audio?
Q. What do I need for videoconferencing and video
mail?
Q. Why can’t I install a Video to USB Adapter with
Windows 95?
A. Connect the Video to USB Adapter to the
computer using the supplied USB cable. Check to
see that the video source (S-Video or Composite)
is set correctly. Make sure the USB port is enabled
in your computer’s BIOS and are enabled in the
Windows Control Panel/System, Device Manager.
A. Right click My Computer. Choose Properties.
Click Device Manager. Click the + symbol next to
the icon labeled Imaging. Find HU-501 USB Video
Capture.
A. Audio needs to be recorded through your
computer’s sound card.
A. You’ll need a video camera, a microphone
attached to your sound card, headphones or
speakers and videoconferencing software (e.g.,
Microsoft NetMeeting
A. The driver does not support Windows 95 due to
that operating system’s limited support for USB. If
you are using Windows 95 you’ll need to upgrade
to Windows 98.
®
Software).
Installing with Mac OS
Note: Video to USB Adapter is compatible with Mac OS 8.6 through 9.2.
1. Insert the enclosed CD.
2. Installing the Application Software
• Insert the supplied CD.
• Click on the Start button, select Run from the menu.
• Type d:\Setup.exe, substituting the letter name of the CD-ROM drive, if
necessary.
• Click OK, and follow the on-screen instructions to install the Arcsoft
Software Suite.
3. Connecting the Video Source
Use either a Composite Video cable or an S-Video cable to connect the
Video to USB Adapter to the video source, such as VideoLabs’ FlexCam™
or a VCR.
4. Connecting to a Video Monitor
The RCA connector on the far left is a Composite Video pass-through for
connection to a monitor or other analog display device. This connection
allows for previewing while recording
2. The ArcSoft icon will appear on your desktop. Double-click it.
Then double click VL USB Adapter to activate the driver installer.
Click Continue, then Install.
3. Install the Video to USB Adapter by double-clicking on the
®
installer icons for Video Impressions and then Photo Studio.
4. Restart the computer and plug the Video to USB Adapter
into an available USB port on the computer.
Frequently Asked Questions
Q. Can I switch between multiple USB video
capture devices?
Q. Why doesn’t the Video to USB Adapter work
after installing the drivers?
A. No. In order to switch between devices, it is
necessary to uninstall the drivers for one device and
install the drivers for the other.
A. Connect the Video to USB Adapter to the
computer using the supplied USB cable. Check to
see that the video source (S-Video or Composite)
is set correctly, and make sure that there are no
other USB video capture devices connected.
Loading...