Video Innovation Products 720p60, 720p25, 720p50, 720p24, 720p30 User Manual

VIDEO INNOVATION PRODUCTS, LLC

4521 PGA Blvd, #338

Palm Beach Gardens, FL 33418

Tel: [phone]

Fax:[phone]

[e-mail]

www.3D-VIP.com

3D-Theatre User’s Manual

Specifications:

INPUT: 1 x HDMI v1.4a (HDCP)
OUTPUT: 1 x HDMI v1.3 (HDCP), 3-pin mini-DIN Sync out
SERVICE: USB for firmware upgrades
POWER: via USB cable
AUDIO: HDMI audio passthrough
VIDEO MODES: NTSC 480i/p, PAL 576i/p, HDTV 720p/1080i/1080p 3D
MODES SUPPORTED:
Frame packing: 720p60, 720p50, 720p30, 1080p24, 1080p25, 1080p30
Side-by-side: 1080i60, 1080i50, 1080p24, 1080p30, 720p60, 720p50, 720p30
Top-Bottom: 1080p24, 1080p25, 1080p30, 720p60, 720p50, 720p30
3D OUTPUT: Field Interleaved for 60/120Hz displays
STANDARD ACCESSORIES:
USB-cable, Quick start guide
OPTIONAL ACCESSORIES:
DLP-link Glasses for DLP displays
External 60/120Hz glasses with emitter for all other displays

DIMENSIONS:
100mm x 85mm x 28mm
WEIGHT:
180g

SERVICE & WARRANTY
One (1) year warranty
Online technical support

Contents:

1- A converter box with USB cable

Required Accessories:

1- Two HDMI cables
2- 5V wall connector*
3- 3D IR Active Shutter glasses for 60Hz/120Hz displays or DLP Link glasses for DLP displays
4- An emitter for 60Hz/120Hz displays – not required for DLP Link glasses
5- 3-pin DIN connector cable for the Emitter

Installation Steps:

The End Plate with 3D-Theatre marking:

1- Insert one end of an HDMI cable in the HDMI OUT on the converter box
2- Insert the other end of the same HDMI cable in to the television/projector
3- Take 3-pin DIN connector cable and connect it to SYNC on the same end of the converter. The other end goes to the back of the

emitter (round IR device with two blue push buttons)

4- Push Dip Switch #1 down (ON) for 60Hz televisions/projectors. Keep it in OFF (UP) position for 120Hz

The End Plate with Video Innovation Products marking:

1- Insert one end of an HDMI cable in the HDMI IN on the converter box
2- Insert the other end of the same HDMI cable in to the PS3 or any other 3D Blu-Ray player
3- Take a USB cable and insert on end to the box and the other en d either via 5V connector* to the wall outlet (recommended) or

directly in a powered device such as your player/display