Videofied XV 210 Installation Manual
XV 210 GPRS Control Panel
INSTALLATION MANUAL
Doc. - Ref. 230 -XV
Last modification date : June 2014
Firmware version : XLP.04.04.05.X XX and later
www.videofied.com
Introduction
Description
The XV is a fully wireless alarm system. It can be powered by standalone batteries or connected to a power
supply. This panel is intended mainly for residential and commercial markets.
With the Motion Viewers™ and Videofied® range of products, the XV panel provides video verification in
case of intrusion.
The XV is a standalone alarm panel connected to a Monitoring Station through a GSM/GPRS transmitter.
The XV panel is equipped with an interface allowing to wire up to 2 TP200 speakerphones (with integrated
microphone and speaker) for audio verification.
The XV panel has two wired programmable inputs and one wired programmable output.
In addition, thanks to the Mapping feature, the programmable inputs can be configured to trigger a video
recording via a Motion Viewer™ Videofied® along with an event.
For specific applications, the XV alarm system offers the possibility to increase its Radio and/or GPRS
performances through the connection of externally wired antennas.
INSTALLATION MANUAL
Technology
The XV alarm panel, like all Videofied devices, uses the S2View® patented technology. Which is an interactive
wireless and AES encrypted technology ensuring signal integrity and optimal security.
The reliability of the signal is guaranteed thanks to the two-way radio frequency transmissions with all the
peripherals of the Videofied® product line.
The integrated antennas allow the system to be totally wireless, thus preventing from the system beeing
inelegant and cumbersome, and eliminating the installation problems.
The jamming detection feature identifies any intentional jamming from a third party. On the other hand, the
supervision feature consists of transmitting signals between every device of the system and the alarm panel
XV. Through the supervision, the detectors transmit every 8 minutes a presence signal.
The entire RSI VIDEO TECHNOLOGIES team wishes you a successful installation.
www.videofied.com
2
Summary
INSTALLATION MANUAL
Introduction............................................................................................................2
Summary...................................................................................................3
1. XV Panel setup...................................................................................................4
1.1 SIM card installation...............................................................................................4
1.2 Panel mounting.........................................................................................................5
1.4 Powering and initialization........................................................................................6
1.5 Pairing the keypad....................................................................................................6
2. XV Panel programming...............................................................................................7
3. TP200 Speakerphone installation
.............................................................................13
4. XV features guide.....................................................................................................14
4.1 Get to access level 4...............................................................................................................14
4.2 How to Arm/Disarm the system.................................................................................................14
4.3 Arming and Siren mode Configuration...............................................................................15
4.4 Manage badges and access codes..........................................................................................16
4.5 Delete the keypad or any other device.....................................................................................18
4.6 Read the event log.....................................................................................................................19
4.7 Programmable inputs and outputs.............................................................................................19
4.8 Golden rules...............................................................................................................................20
5. Transmitted events list.............................................................................................21
6. 2G3G error codes...
.................................................................................................22
7. Technical specification and security notes
..........................................................23
www.videofied.com
3
1. XV Panel setup
INSTALLATION MANUAL
1.1 SIM Card Installation
Before removing the front cover from its box, Put the SIM card on the
plastic base (Take care to respect the right direction).
DO NOT insert or remove the SIM card while the panel is powered.
1.2 Panel mounting
Bracket holes
Fix the back casing on the wall using the three mounting holes as shown
Mounting the panel is not required for programming.
www.videofied.com
4
1. XV Panel setup
INSTALLATION MANUAL
1.3 Powering and initialization
• The panel is powered either with a mains power supply with 4 backup LR20 Alkaline batteries (Option 1 recommended) or with 4
LSH20 Lithium batteries (Option 2).
• Press and hold the PROGRAMMING BUTTON for 10 seconds, until the indicator LED blinks twice.
• The panel is now reset, a CMA, XMA or XMB has to be enrolled to configure the panel.
THE CONTROL PANEL MUST BE CONNECTED TO AN EXTERNAL POWER SUPPLY (OPTION 1) WHEN
USING THE RINGTONE FEATURE OR SMARTPHONE APP.
Option 1
Option 2
Mains power supplyProgramming button
www.videofied.com
5
1. XV Panel setup
INSTALLATION MANUAL
1.4 Pairing the remote keypad
• Press the XV programming button and release for the enrollment of a programming
keypad.
• Insert all LS14500 Lithium batteries into the keypad.
• Do not mount the keypad. It will display one of the following screens:
RSI (c) 2013
videoed.com
• Press on both
LED on the keypad will blink rapidly. Wait for the keypad to pair.
• If the keypad doesn’t pair up with the panel and shows «XX», it certainly means
that it is still paired to another system and needs to be reset. Take the batteries out,
and press repeatedly on the keypad tamper switch. Then proceed to the above
steps.
CLR
and
ESC NO
or
keys at the same time and release. The indicator
<=========XX=========>
www.videofied.com
6
2. XV Panel programming
INSTALLATION MANUAL
Keypad Display Actions and comments
KE YPAD 1
RECORDED
OK or YES
The system can also be programmed in: french, italian,
< - LANGUAGE : - >
ENGLISH (UK)
for language selection
OK or YES
RADIO RANGE TEST?
german, dutch, spanish, swedish, portuguese, danish,
czech and polish.
The language can be changed at any time once the panel
is programmed in the MAINTENANCE menu.
OK or YES
RF TEST
x/9
Please wait
RF TEST
9/9
OK or YES
RADIO RANGE TEST?
ESC
NO
INSTA L L ER CODE
4 TO 6 DIGITS
THEN OK/YES
The Radio Range test must be run during the device
learning process in order to ensure proper pairing with
the control panel. This test measures the strength of
communication between the device and the control
panel. The keypad will display a real time radio range
value on a scale of 9.
To receive the most accurate results you must run the
radio range test for at least 30 seconds.
Result must be 8 out of 9 or better for reliable
transmission.
Using the Alphanumeric Keypad, enter the Installer Code
of your choice.
INSTALLER CODE :
OK or YES
CONFIRM CODE
OK or YES
The Installer Code will be used for all future maintenance
and configuration.
This code is important to keep track of.
There is no back door or Default codes to the
system.
Please refer to the restriction rule for codes (Chapter 4.4).
Some codes are already used by default and therefore
cannot be used.
www.videofied.com
7
Loading...