Video Domain MEMOCam, MEMOCam PLUS, MEMOCam DVR, MEMOCam PLUS-S Installation
INSTALLATION MANUAL
MEMOCam
MEMOCam®PLUS
MEMOCam®DVR
MEMOCam®PLUS/S
®
Version 3.2.001
PN/V7122550
Copyright Video Domain Technologies Ltd.
The information in this manual was accurate and reliable at the time of its
release. However, Video Domain Technologies Ltd. reserves the right to
change the specifications of the product described in this manual without
notice at any time. As such, the descriptions and data included in this
document may not be current. Video Domain Technologies Ltd. assumes no
responsibility for any inconsistencies between the actual product and this
manual's description of it. Any party electing to use this manual does so with
the full knowledge of the possibility of such inconsistencies and takes full
responsibility for any consequences that may arise while installing and/or
using this product.
Video Domain Technologies Ltd. holds the copyright to this manual. All rights
are reserved. No part of this publication may be reproduced or transmitted in
any form or by any means without prior written consent from Video Domain
Technologies Ltd.
2003
Disclaimer
Video Domain Technologies Ltd. makes no warranties regarding the content
of this document. Video Domain Technologies Ltd. reserves the right to alter,
modify and revise the specification without notice. Video Domain
Technologies Ltd. assumes no responsibility for any errors contained herein.
The customer should note that in the field of multimedia there are a number
of patents held by various parties. It is the responsibility of the user to assure
that a particular implementation does not infringe on those patents. Video
Domain Technologies Ltd. does not indemnify the user from any patent or
intellectual property infringement.
Registered Trademarks
All other proprietary names mentioned in this manual are the trademarks of
their respective owners.
Video Domain Technologies Ltd.
www.vdomain.com
Manufacturer: Video Domain Technologies Ltd.
Model: MemoCam
Rated voltage(s): 12VDC
Current(s) (or power): 0.5 A
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
This Class A/B digital apparatus complies with Canadian ICES-003.
Cet appareil numẻrique de la classe A/B est conforme ả la norme NMB-003 du Canada.
Changes or modifications not expressly approved by Video Domain could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC
TABLE OF CONTENTS
Introduction .................................................................... 1
Main Features ................................................................................3
Installing the MemoCam Unit ......................................... 5
System Requirements.....................................................................5
PC Minimum Requirements ........................................................5
Pocket PC Minimum Requirements.............................................5
Packing List ....................................................................................6
Mounting the Device......................................................................7
Connecting the Power Supply ........................................................9
Optional Connections (Advanced Features)..................................10
MemoCam Terminal Blocks ......................................................11
Terminal Wire Connections.......................................................12
Connecting an External Device .................................................14
Operating the MemoCam.............................................. 17
Using the Multimedia Card ..........................................................17
LED Indicators ..............................................................................18
Audible Signals (Beeps) ................................................................19
Using the Remote Control ............................................. 21
Arming the MemoCam.................................................................22
Disarming the MemoCam ............................................................22
Manual Image Recording – Snapshot...........................................23
Using the Video Output ...............................................................23
Troubleshooting ............................................................ 25
Technical Specifications ................................................. 27
Dimensions ..................................................................................27
Camera ........................................................................................27
Multimedia Card ..........................................................................28
Multimedia Card Reader ..............................................................28
Infrared Motion Detector – Dual Element PIR...............................29
Terminal Connectors and Switches...............................................29
Power Supply ...............................................................................29
Appendix for MemoCam Plus/S .....................................30
RS-485 ID Settings .......................................................................30
Termination Dipswitch .................................................................33
Wiring RS-485..............................................................................33
Host Device ..................................................................................34
Wiring RS-232..............................................................................34
Glossary ......................................................................... 35
INTRODUCTION
This manual is applicable for the following products:
MemoCam
MemoCam Plus
MemoCam DVR
MemoCam Plus/S
MemoCam is a complete stand-alone digital CCTV system in a
single device. It is a high performance camera with automatic
digital recording features contained in a single compact
enclosure.
The MemoCam system includes a CCD camera, a video
compression engine, a removable Multimedia card, and a
Passive Infrared (PIR) detector.
The MemoCam unit automatically records events on the
Multimedia card following an alarm trigger. The trigger can be
activated by an external open contact or the internal PIR
detector. Single snapshots can be recorded using the external
remote control unit.
MemoCam Plus supports the use of two additional cameras,
video motion detection (VMD), and video output capability.
Figure 1. MemoCam Plus
¡ 1
MemoCam DVR does not contain a camera or PIR, but can
support up to three external cameras, video motion detection
(VMD), and video output capability.
Figure 2. MemoCam DVR
All images are stored in the Multimedia card. To analyze the
recorded events on a PC, the Multimedia card is removed from
the MemoCam unit and images are downloaded using a
Multimedia card reader and the MemoCam software.
One or more stand-alone units can be placed at different site
locations. The units are configured using the Multimedia card.
The MemoCam is activated using the remote control unit.
2 ¡
Figure 3. The MemoCam System
Main Features
The MemoCam system has the following features:
Stand-alone integrated CCTV system packaged in a
standard PIR detector case (MemoCam DVR contains no
internal camera or PIR).
B/W camera – Color option available (MemoCam,
MemoCam Plus).
CCIR, EIA B/W video inputs (2 for MemoCam Plus, 3 for
MemoCam DVR).
Two relays for activation of external devices.
Automatic recording upon trigger.
Standard 16 MB memory card can contain up to 1500
recorded images. 64 MB card can contain up to 6000
images.
Automatic setup using the Multimedia card.
User defined image quality, frame rate, and recording time
per event, delay between frames, and more.
Fixed or cyclic recording modes.
Pre-alarm recording.
Image integrity protection.
Event and Arm/Disarm Scheduler.
Video motion detection (MemoCam Plus, DVR).
Multi camera support (MemoCam Plus, DVR).
Video out (MemoCam Plus, DVR).
Remote Control unit.
Covert case.
The stand-alone MemoCam unit replaces the classic Time
Lapse VCR + PIR detector + Camera equipment set.
Modular solution from single camera to multiple site and
multiple camera systems.
Easy to use PC software.
Economical system expansion.
¡ 3
INSTALLING THE MEMOCAM UNIT
In addition to the system requirements described below,
installation of the MemoCam unit will require a screwdriver
and two screws. Depending on the hardness of the wall, a drill
and two screw-anchors may also be required.
System Requirements
The following are the minimum system requirements for
installing the MemoCam viewer application on a PC, or the
Pocket PC viewer application on a pocket PC.
PC Minimum Requirements
CPU Pentium II 200Mhz or higher.
RAM 16 MB or higher.
Graphic adapter Super VGA or higher
Display resolution 640x480, 16 bit or higher.
Operating systems Windows 95, 98, 2000, ME, NT, or XP
with Internet Explorer
Multimedia card
reader
TM
5.0 or higher
Pocket PC Minimum Requirements
CPU ARM (or compatible)
RAM 16 MB or higher
Display resolution 320x240, 16 bit or higher
Operating systems Windows CE 3.0 or higher
Multimedia card reader
¡ 5
Packing List
The MemoCam Kit includes the following items:
MemoCam unit.
16 MB Multimedia card.
Protective card cover (MemoCam Plus only).
Mounting Kit (brackets).
Power Supply.
IR Remote Control Unit and 2 AAA Batteries.
Software CD.
MemoCam Installation Manual (this manual).
MemoCam Quick Setup Guide.
MemoCam software CD.
6 ¡
Mounting the Device
The MemoCam unit is wall-mounted. However, it is not
necessary to wall-mount the MemoCam DVR.
Begin by selecting a mounting location on the wall. Choose a
location most likely to intercept an intruder. Make sure that
the MemoCam unit’s power cord can reach a nearby power
receptacle. If necessary, an extension cord can be used.
The PIR is most sensitive in detecting sideways motion.
The MemoCam unit performs best in steady light and stable
temperature.
Avoid the following locations:
Facing direct sunlight or light sources.
Facing areas subject to rapid quick temperature changes.
Areas with air ducts or substantial air flows.
Facing areas with high light contrast.
A MemoCam mounting bracket is included with the
MemoCam unit.
Figure 4. Mounting Bracket
¡ 7
Loading...