VideoComm Technologies MX-5842c, MXR-5842c, MXR-5842bw, MX-5847VF, MXR-5847VF Owner's Manual
...
MXR-5842-47 Series Manual Rev. B 2007
# MX-5847VF # MXR-5847VF
# MX-5842c # MXR-5842c
# MX-5842bw # MXR-5842bw
5.8GHz Wireless Camera Series
OWNER’S MANUAL
It’s About Real-Time
1
MXR-5842-47 Series Manual Rev. B 2007
TABLE OF CONTENTS
TABLE OF CONTENTS........................................................................... 2
SAFETY NOTICES................................................................................... 2
INTRODUCTION ..................................................................................... 3
PARTS LIST.............................................................................................. 4
SYSTEM SETUP....................................................................................... 5
Camera Power Supply Options ............................................................................................................ 5
Channel Selection................................................................................................................................6
Receiver Setup ..................................................................................................................................... 7
Camera Bracket Mounting - Ceilling.................................................................................................... 8
Camera Bracket Mounting - Wall......................................................................................................... 9
TIPS & TROUBLE SHOOTING.............................................................10
SPECIFICATIONS ..................................................................................11
WARRANTY INFORMATION/ TERMS & CONDITIONS ................12
SAFETY NOTICES
I. THIS DEVICE COMPLIES WITH FCC RULES PART 15.249 OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITONS:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device
II. In order to comply with the FCC/IC adopted RF exposure requirements, this transmission system will be installed by an
authorized professional installer of VideoComm Technologies. Installation of all antennas must be performed in a manner
that will provide at least 23cm clearance from the front radiating aperture, to any user or member of the public.
III. This is NOT an intrinsically safe device. Do not take into area where intrinsic safety is required. Bodily harm may result if
warning is ignored.
IV. DO NOT OPERATE WIRELESS CAMERA WITHOUT ANTENNA CONNECTED TO ANTENNA PORT. Failure to do
so will result in damage to the unit and void the warranty.
V. DO NOT OPERATE THE WIRELESS CAMERA WHEN the Receiver is closer than ten feet. The devices may not work
properly and permanent damage can occur.
VI. The device has been certified by the FCC for use with other products without any further certification (as per FCC section
2.1091.) Changes or modifications not expressly approved by VideoComm Technologies could void the user’s authority to
operate the equipment.
The term “IC:” before the radio certification number only signifies that Industry Canada
Technical specifications were met.
2
MXR-5842-47 Series Manual Rev. B 2007
INTRODUCTION
Introduction
ALL NEW 5.8GHz wireless camera series offers an economical solution for real-time, high resolution
wireless video applications, that's not susceptible to interference from 2.4GHz 802.11 b/g data devices.
Featuring 8 user selectable channels, this wireless camera is an ideal choice when multiple wireless video
links are required for any portable, temporary or covert surveillance and monitoring applications. Perfect for
any indoor camera application including, office, warehouse, retail stores or nursery.
Advantages
• Easy to install and operate with all accessories included
• 8 user selectable channels
• NO interference from 2.4GHz 802.11 b/g data devices
• 5.8GHz low profile desktop receiver included with some models.
• High resolution CCD camera
• Low current consumption for convenient battery operation
• Range up to 300 feet indoors
• One Year Limited Warranty
• RoHS compliant models available upon request.
• Ideal for portable, temporary and covert surveillance or monitoring applications
VideoComm Technologies
3
MXR-5842-47 Series Manual Rev. B 2007
PARTS
PARTS LIST
This 5.8GHz wireless camera system has been carefully manufactured, tested, inspected and packaged.
5.8GHz Color VariFocal Camera
Please inspect the contents carefully to ensure you have received all parts and accessories listed. If parts are
missing or damaged, contact VideoComm Technologies Customer Service or your re-seller immediately.
5.8GHz Color Pinhole Camera
5.8GHz B&W Pinhole Camera
9VDC Power Supply – # PS-9300MX
AA Battery Pack Holder - # BP-900
9Volt DC Snap Cables - # A-BRL12VJK Two
Desk Top Receiver – # RX-5808
BNC-Male< to >RCA-Female adapter
12VDC Power Supply – # PS-1250
3dBi Duck Antenna - # RUB-5803
MX-5842C
---
One
One
One
---
---
---
---
MX-5842bw
---
---
One
One
One
Two
---
---
---
---
MX-5847VF
One
---
---
One
One
Two
---
---
---
---
MXR-5842c
---
One
---
One
One
Two
One
One
One
One
MXR-5842bw MXR-5847VF
---
---
One
One
One
Two
One
One
One
One
One
---
---
One
One
Two
One
One
One
One
VideoComm Technologies
4
Loading...