Vidao V4040HD User Manual

Download

Page 1

USER’S MANUAL

40” 4K ULTRA HD TELEVISION

V4040HD

Ver 1.0

For technical assistance or troubleshooting

please call 1-855-998-4326 or visit www.sibrandssupport.com

Use a VIDĀO HDMI Cable for the Best Possible Video & Sound

Page 2

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (includ-

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The

consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

paratus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. WARNING: To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture.

shall be placed on the apparatus.

17. The mains plug or appliance coupler shall remain readily operable.

18. Use in outdoors: This TV is not designed for outdoors installation. Do not expose the TV to rain, as it may

become damaged.

Safety:

TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS ARE INSIDE. REFER TO QUALIFIED SERVICE TECHNICIAN ONLY.

intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s

Instruction: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.

to constitute a risk of electric shock to the users.

V4040HD-1

Page 3

Safety Instructions

Please read these instructions carefully.

This product complies with all applicable US federal safety requirements, as well as those of the Canadian Standards Association.

1. Cleaning

Always unplug the TV before cleaning. Do not use liquid or aerosol cleaners. Use a soft, slightly damp cloth to

clean.

2. Water and Moisture

Do not use this TV near water. Avoid using this TV in an excessively damp environment.

3. Stand

This TV should always be placed on a solid, sturdy surface.

4. Ventilation

To prevent overheating, do not block or obstruct the vent openings on the TV’s back panel. Also, avoid placing this TV in a confined area with poor air flow.

5. Power Sources

This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of The type of power supply to your home, consult your electronics retailer or local power company.

6. Power Cord Polarization

This TV is equipped with a three-wire grounding type plug, a plug with a third (grounding) pin. As a safety feature, this

plug will only

t into a grounded power outlet. If you are unable to insert the plug into the outlet, contact your electrician

to replace the obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

7. Power Cord Protection

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the TV.

8. Lightning

To protect the TV during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV from lightning and power-line surges.

V4040HD-2

Page 4

Safety Instructions

9. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the TV be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges. Article 810 of the National Electrical Code (U.S. A.), ANSI / NFPA 70 provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Example of Grounding According to National Electrical Code Instructions

NEC - National Electrical Code

10. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall on to power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

11. Overloading

12. Object and Liquid Entry

Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short-out

TV.

13. Servicing

Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or

14. Damage Requiring Service

a. If the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c. If the TV has been exposed to rain or water. d. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will

e. If the TV has been dropped or the cabinet has been damaged. f. If the TV exhibits a distinct change in performance.

Ground Clamp

Antenna Lead in Wire

Antenna Discharge Unit (NEC Section 810-20)

Grounding Conductor (NEC Section 810-21)

Ground Clamps

Electric Service

Equipment

Power Service Grounding Electrode System (NEC Art 250, Part H)

V4040HD-3

Page 5

Safety Instructions

15. Replacement Parts

16. Safety Check

Upon completion of any service or repairs to this TV, ask the service technician to perform safety checks to determine whether the product is in proper operating condition.

17. Wall Mounting

The TV should be mounted to a wall only by a professional. The TV may slide or fall, causing serious injury to a child or adult, and serious damage to the product. Warranty shall be voided.

18. Heat

The TV should be situated away from heat sources such as radiators, heat registers, stoves, or other products

NOTE TO CABLE / TV INSTALLER:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric

should be connected to the grounding system of the building, as close to the point of the cable entry as practical.

FCC REGULATORY INFORMATION:

This television has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This television generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

electronic equipment, which can be determined by turning the television off and on, then the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and television.

- Connect the equipment into an outlet on a circuit different from that to which the television is connected.

- Consult your dealer or an experienced radio / TV technician for assistance.

authority to operate the equipment.

guarantee that interference will not occur in a particular installation. If this television does cause interference to other

When replacement parts are required, be sure that only an authorized service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards and void any warranty.

V4040HD-4

MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of the MHL, LLC.

“HDMI”, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. “Blu-ray Disc” is a trademark of Blu-ray Disc Association, registered in the U.S. and other countries.

All other trademarks are the property of their respective owners and are used for descriptive and/or compatibility purposes only.

DISCLAIMERS

(including amplifiers) that produce heat.

Code (USA). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground

Any changes or modifications not expressly approved by the party responsible for compliance may void the user’s

Page 6

Table of Contents

Important Safety Instructions .........................................................................................................................................1

Table of Contents ..........................................................................................................................................................5

Introduction ....................................................................................................................................................................6

Installing the Base .........................................................................................................................................................7

Remote Control

Battery Install .................................................................................................................................................................8

Overview .......................................................................................................................................................................9

TV Overview

Front & Side Panel ......................................................................................................................................................11

Rear Panel .................................................................................................................................................................12

Installation

TV Setup

Picture Setting

Contrast ........................................................................................................................................................................20

Brightness ....................................................................................................................................................................20

Color .............................................................................................................................................................................20

Tint ................................................................................................................................................................................20

Sharpness ....................................................................................................................................................................20

Color Temp . ...................................................................................................................................................................20

Advanced Setings . ........................................................................................................................................................20

Audio Settings

Bass .............................................................................................................................................................................21

Treble ...........................................................................................................................................................................21

Balance ........................................................................................................................................................................21

MTS ..............................................................................................................................................................................21

Digital Audio Output .....................................................................................................................................................21

Surround .......................................................................................................................................................................21

AVL ..............................................................................................................................................................................21

Audio Language ...........................................................................................................................................................21

Date & Time Settings ..............................................................................................................................................22

Setup Settings

Menu Languages ..........................................................................................................................................................23

Transparent ................................................................................................................................................................23

..................................................................................................................................................................23OSD Timeout

Closed Captions.........................................................................................................................................................24

Connection to a Home Theater System .........................................................................................................................17

Connect a digital cable box, satellite recei

ver, or DVD player with a Component connection .......................................14

Connect a digital cable box, satellite recei

ver, or DVD player with Composite cables (yellow, red, & white) ................

Connect a digital cable box, satellite recei

ver, or DVD player with an HDMI cable .......................................................13

Connecting the Power and Basic Cable connection ......................................................................................................16

Initial Setup Wizard .......................................................................................................................................................18

V4040HD-5

TV Channel Setup & Channel Auto Scan .....................................................................................................................29

CEC Settings...............................................................................................................................................................25

Parental Control ........................................................................................................................................................26

Channel Settings

Favorite ........................................................................................................................................................................28

Show / Hide ..................................................................................................................................................................28

Channel Label ..............................................................................................................................................................28

Zoom Modes .............................................................................................................................................................30

USB Modes

..................................................................................................................................................................31

...........................................................................................................................................................33

Troubleshooting ........................................................................................................................................................34

MHL Setting

..............................................................................................................................................................

Page 7

Introduction

What’s In The Box

The package includes the following items. Save the carton & packing for future shipping

• Remote Control

• AAA Batteries (2)

• Quick Start Guide

• User Manual

• Child Safety

• Pedestal Base

• User manual

• Quick Start Guide

• Child Safety

• Remote Control

• AAA

Batteries x 2

teg lliw koob noitcurtsni sihT .snoitcnuf dna serutaef tuoba snoitseuq evah uoy revenehw ediug siht ot refer esaelP

you up and running with the best possible connection type for your devices. Enjoy!

This TV uses a 200x200 VESA mounting bracket attachment pattern. Please take this information with you when purchasing a wall mount for this TV.

Wall Mount Information

For technical support, the VIDAO Technical Support Center is available 9:00AM to 9:00PM (Monday to Friday) and 9:00AM to Noon (Saturday) for technical assistance or troubleshooting. To contact us by phone, please call 1-855-383-2411.

USER’SMANUAL

50”LE DTELEVISION

50V900R

Ver1.0

• Screws M4X30 for Pedestal Base

• Screws M4X30 for Pedestal Base (4)

• Pedestal Base

V4040HD-6

V4040HD

Page 8

Place the TV face down on a soft cloth or cushion.

Position base as shown.

Insert 4 screws M4X30 (provided) through the holes in the bottom of the base into the post holes and tighten securely. Do not over-tighten.

Installing the Base

V4040HD-7

Page 9

V4040HD-8

Battery Install

Remote Control

Your remote control handset is powered by two (2) AAA type batteries

• Effective remote range is approximately 16 feet at an

angle of no greater than 30° to the left / right or 20° up / down to the IR sensor.

• To avoid possible damage from battery chemical

leakage, remove the batteries if you do not plan to use the remote for an extended period of time. Do not mix batteries of different age and / or type. Always discard used batteries safely.

• Do not expose the remote control to liquids, direct sun-

light or sources of excessive heat.

• The IR receiver on the TV will not work properly if the set

is in direct sunlight.

NOTE: Improper use of batteries can result in a chemical leakage or explosion.

Comcast or Direct TV : 10030

Dish Network : 506 RCA Universal : 0030

IR Receiver

Cable / Satellite Remote Control Codes:

NOTE: The remote control from your Cable/Satellite provider can be programmed to operate most

of the major functions of this TV model which include:

POWER, INPUT / SOURCE, VOLUME +,

VOLUME - , CHANNEL +, CHANNEL - , SELECT/OK/ENTER

(based on your remote), and NUMBER

buttons. For non-major TV functions not listed, use the remote control included with this TV.

o program your Cable / Satellite remote to operate this VIDAO TV, follow the programming instruc-

tions included with your providers’ remote and use the following codes.

• Turn the remote over and remove battery cover.

• Place two (2) “AAA” batteries into the battery compartment with the “+” and “-“ ends facing as indicated.

• Replace the cover

AT & T (U-verse) : 1043

30 30

V4040HD

Page 10

Remote Control

Overview

V4040HD

V4040HD-9

Page 11

Remote Control

Overview

Button Function

1. POWER Turn the display ON or OFF (Standby).

2. DISPLAY Provides program information for program being viewed.

PLAY/PAUSE (USB)

4. PREVIOUS (USB)

5. NEXT (USB)

6. STOP (USB)

7. REP REPEAT (USB)

8. CH.LIST Press to display a list of channels saved in the TV tuner memory.

9. GUIDE Press to review scheduled programming for the currently viewed channel.

10. FAV Press to display a listing of your favorite TV channels.

11. FREEZE Pause and still-frame the current image on the display. Press again for live TV.

13. TEMP Select the Color Temperature COOL - NORMAL - WARM.

14. ARROWS / ENTER

Press the navigation buttons for moving through the menu options. Press the

15. EXIT Press to exit a displayed menu.

16. RETURN Press to return to the previous menu.

17. SLEEP Press to activate the Sleep function. The TV will automatically turn off after;

18. MENU Press to display the Main menu.

19. ASPECT

Select the viewable display aspect options: NORMAL - WIDE - ZOOM - CINEMA.

20. VOLUME (+ / -) Adjust the volume up (+) or the volume down (-).

21. LAST Press to switch between the current channel and previously viewed channel.

22. MUTE Press to temporarily turn off the TV audio. Press again to resume.

23. CHANNEL ()

Change the channel up or down.

24. NUMBERS / DASH Select desired TV channel directly. For example: to select digital channel 4-1, press “4”, press “-”, and press “1” = (4-1).

25. INPUT Press to display all of the input sources on screen.

27. MTS Press to select a program’s second audio channel (if available).

28. CCD

Press to select closed caption subtitles (if available) OFF - ON - CC ON MUTE

29. NUMBER KEYS

Press number keys to enter channel numbers.

12. PICTURE

STANDARD - DYNAMIC - SOFT - USER - POWER SAVING.

5 - 10 - 15 - 30 - 45 - 60 - 90 - 120 - 180 - 240(minutes) - OFF.

26. AUDIO

STANDARD - MUSIC - MOVIE - USER

V4040HD-10

Page 12

TV Overview

4. MENU - Press the MENU button to display. Press VOL+ to select from the 6 menu options available. Press the CH+ / CH- buttons to select a feature from the selected menu then press the VOL+/VOL- buttons to adjust the volume settings.

3. )+ HC -( lennahC eht sserP - CH-+ HC /

buttons to select a channel in the TV mode.

2. Volume (+VOL-) - Press the VOL+ / VOL- buttons to adjust the volume up or down.

Front & Side Panel

1. POWER - Press the POWER button to turn the TV ON/ OFF (standby). The screen image will

appear within a few seconds, and the Green LED will turn on.

IR Receiver

A soft green light illuminates when the television power is on.











V4040HD-11

INPUT

CH+

CH- VOL+

VOL-

POWER

INPUT MENU

CH+ CH- VOL+ VOL- POWER

5. INPUT - After connecting your DVD, cable box, etc. select the appropriate input source to view. Press the

INPUT button to display the input options. Press the CH+ / CH- buttons to highlight the input source and press the VOL+ button to select.

Source Select

Component

HDMI1 HDMI2 HDMI3 HDMI4

Media

Page 13

NOTE: You must remove the pedestal before wall mounting.

TV Overview

Rear Panel

Wall Mounting

It is recommended that you consult a professional before mounting this TV a wall.

Use VESA 200x200 wall mount hardware.

V4040HD-12

7. USB Input Port

supports MP3 and JPEG.

4. AUDIO OUT - Connect to audio receiver.

6. CABLE-ANTENNA

- Connect an antenna or cable connection for television reception.

Note: Use an outdoor antenna, cable or satellite for best reception.

1. OPTICAL OUT -

Connect to an AV Receiver for high quality digital audio.

2. AV - Connect an external device to the composite VIDEO (V) and AUDIO (L/R) out jacks found on most equipment.

3. Component Y Pb Pr Input - Connect to an AV device that features component (Y Pb Pr) video and audio output jacks.

5. HDMI1/2/3/4 IN

- To connect to a High Definition (HD) signal output device, such as a set top box, blu ray

disc player or AV receiver.

Note: HDMI1 has ARC function.

Note: MHL compatible devices can be connected to HDMI4 via a HDMI-to-MHL adapter (not included).



















Page 14

Installation

Connection to HDMI Input

Blu-ray, HD DVD, or Game Console

How to Connect

•

On the back of your device, connect the HDMI cable form HDMI out on device to HDMI in on the panel.

How to Use

•

Press the INPUT button on the remote, then use the  arrows to highlight HDMI. Press ENTER .

Coaxial / RF Cable

(not included)

Optional HDMI cable ( not included )

Cable / Satellite set top box

Optional HDMI cable ( not included )

Digital set top box, gaming console, or blu-ray w / HDMI interface

Digital Cable / Satellite Set Top Box

How to connect

•

On the back of your device, connect the HDMI cable from HDMI out on device to HDMI in on the panel.

How to Use

•

Press the INPUT button on the remote, the use the  arrows to highlight HDMI. Press ENTER .

NOTE: You can also connect a digital cable/satellite box using an RF coaxial (75 ohm) cable. Most cable/satellite systems require the TV to be set to Ch. 3 or 4 to display a picture.

HDMI

V4040HD-13

Source Select

Component

HDMI1

HDMI2 HDMI3 HDMI4

Media

Page 15

Installation

Connection to Component YPbPr Input

How to Connect

•

Match and insert the green (Y), blue (Pb), and red (Pr) cables into the device and TV. Next, connect the red and white (L & R) audio cables.

*NOTE: The picture will be black & white if hooked up incorrectly. You must hook up audio cables separately.

How to Use

•

Press the INPUT button on the TV remote. Then use the  arrow buttons to highlight Component . Press ENTER.

Connecting a device with a Component connection.

Optional Component cables (not included)

Digital set top box, gaming console or DVD

L R Y Pb Pr

V4040HD-14

Source Select

Component

HDMI1 HDMI2 HDMI3 HDMI4

Media

Page 16

Installation

Connection to Composite Input

Connecting a device with a Composite connection.

How to Connect

• Match and insert the yellow, red, and white A / V cables into the

device and TV.

How to Use

•

Press the INPUT button on the remote. Then use the  arrow buttons to highlight AV . Press ENTER.

Audio Video Cable (not included)

Digital set top box, gaming console or DVD

V4040HD-15

Source Select

Component

HDMI1 HDMI2 HDMI3 HDMI4

Media

Page 17

Installation

Connection to Antenna & Cable / Satellite Box

We recommend using a high quality roof top antenna, digital cable, or satellite box for the best display and performance. Note: Reception quality is determined by your location, geographical terrain, distance from the local broadcast transmitter, and strength of antenna.

Connecting an antenna or basic cable service:

• Connect the RF coaxial (75 ohm) cable from

existing roof top / in door antenna, or wall outlet.

• Finger tighten the Coaxial / RF Cable end to the

TV input on the panel.

Coaxial / RF Cable (not included)

Ant./Cable

Wall Outlet

Roof Antenna / Cable Outlet Installation

Connecting to POWER IN

•

Connect the power cord to a properly grounded AC outlet.

V4040HD-16

Page 18

How to Use (Video)

Press the appropriate INPUT button on the remote. Use ▼ ▲ arrow buttons to highlight the input source to view and then press ENTER.

How to Use (Audio)

Select the appropriate input from your audio equipment.

*NOTE: Refer to the User Manual from your home theater equipment for recommended audio settings.

Installation

Connection to a Home Theater System

Connection to a Home Theater Audio System

Connecting to a Home Theater System

Digital audio can deliver optimal 2 - channel stereo or 5.1 surround sound with Five discrete full range channels plus a separate channel for a subwoofer.

Connect an optional digital cable directly to the television’s OPTICAL OUT audio output.

How To Setup Digital Output

• Press the MENU button on the remote control.

• Press the u arrow button to select Sound.

• Press the q arrow button to highlight Digital Audio output.

• Press u to select Raw or PCM

Front Left Speaker

Front Right

Speaker

Center Channel

Dolby Surround

Connection Illustration

Optional cables

(not included)

Surround Left

Speaker

Surround Right

Speaker

Digital set top box, gaming console or DVD

Dolby Prologic

Surround Receiver

V4040HD-17

Sound Mode

Bass

Treble

Balance

MTS

Standard

Digital Audio output

Audio Language

Surround sound

AVL

Stereo

English

Off

Raw

Off

Select

Move

Exit

Optional digital cable (not included)

Page 19

TV Setup

Initial Setup Wizard

IMPORTANT NOTE: If your TV is connected to a Cable or Satellite set top box DO NOT run the “Channel Auto Scan”

NOTE: the Setup Wizard only appears when turning on the TV for the first time.

How to Navigate the Setup Menus:

Use the  arrow buttons on the remote to move to the menu selection.

in STEP 3.

After connecting your TV antenna or cable wire, turn the television ON.

The quick Setup Wizard will display on-screen to help guide you through the 3 steps listed below:

STEP 1: Choosing a Menu Language

Use the   arrow buttons on the remote to choose the desired menu option.

Use the  arrow buttons to select Menu Language.

Use the   arrow buttons to select English - Francais - Espanol.

Use the  arrow button to select Go to next step and press the

 button to complete the step.

STEP 2: Setting the Time

Use the  arrow buttons to select Time Zone, Daylight Saving

Time, and Time Format selections.

Use the   arrow buttons to select the desired setting.

Use the  arrow button to select Go to next step and press the

 button to complete the step.

Setup Wizard

Please select your preferred language

Move

Exit

MEN U

Menu Language

English

Setup Wizard

Daylight Saving Time

Time Format

Go to next step

Select the time zone & Daylight saving time

Pacific

Off

12-hour

Sel ect

Mov e

Return

Time Zone

V4040HD-18

Go to next step

Setup Wizard

Daylight Saving Time

Time Format

Go to next step

Select the time zone & Daylight saving time

Pacific

Off

12-hour

Select

Move

Exit

MEN U

Time Zone

Pacific

Page 20

TV Setup

Initial Setup Wizard

STEP 3: Setting Air/Cable and Channel Auto Scan

Use the   arrow buttons to select Air or Cable based on your

type of connection (Antenna or Cable without a set top box).

For Antenna & Cable Connections WITHOUT a set top box:

Use the  arrow button to select Go to next step and press the

 button to begin the Channel Auto Scan.

Note: Your type of television connection will determine if you should complete the Channel Auto Scan part of this step.

Channel Auto Scan may take several minutes to complete.

For Cable/Satellite Connections WITH a set top box:

Press the MENU button on the remote control to exit the Setup Wizard.

NOTE: You will see the message “PLEASE RUN AUTO SCAN” on the screen. Ignore this message as this is not necessary when using a set top box.

Press the INPUT button on the remote control to display the Input Source screen illustrated to the left.

Use the  arrow buttons to highlight the input where the set top box was installed. Press ENTER to select the desired input.

Once Channel Auto Scan has ended, Initial Setup is complete. You may now begin enjoying your TV, or make further adjustments to the TV settings which are explained in the following pages of this manual.

Initial Setup is now complete. You may now begin enjoying your TV, or make further adjustments to the TV settings which are explained in the following pages of this manual.

IMPORTANT NOTE: If your TV is connected to a Cable or Satellite set top box DO NOT run the “Channel Auto Scan”

in STEP 3.

V4040HD-19

Setup Wizard

Select the antenna type then auto scan

Cable

Move

Exit

MEN U

Go to next step

Air / Cable

Setup Wizard

Select

Move

Exit

MEN U

Total Found : 0

Analog : 0 Digital : 0 RF CH : 2

Source Select

Component

HDMI1 HDMI2 HDMI3 HDMI4

Media

Page 21

Note: When adjustments are completed, you may select another menu by pressing the Menu button.

Menu Adjustments

Picture Setting

The Picture menu offers options to enhance and reﬁne the picture displayed on your TV based on ambient room light and personal preferences. Adjustment options include contrast, brightness, color, sharpness and color temperature.

How to Navigate:

Press the MENU button on the remote control. Navigate using   arrow buttons to select Picture. Press the down 

viewing environments. Depending on the ambient light level in the room, you may ﬁnd one of the other Picture settings more pleasing.

To make more critical adjustments based on your own preferences select the User mode.

• Brightness

• Contrast

Press down  arrow button to highlight Brightness. Navigate using the   arrow buttons to increase or decrease overall brightness.

Press down  arrow button to highlight Contrast. Navigate using the   arrow buttons to increase or decrease contrast intensity.

Press down  arrow button to highlight Color. Navigate using the   arrow buttons to increase or decrease color intensity.

Press down  arrow button to highlight Tint. Navigate using the   arrow buttons to adjust colors toward green or reddish tint.

Press down  arrow button to highlight Sharpness. Navigate using the   arrow buttons to soften or view crisper edges in the picture.

Press down  arrow button to highlight your Color Temperature preference. Navigate using the   ar- row buttons to select Cool (more bluish tone), Normal or Warm setting.

• Advanced Settings

Adjust advanced video features to ﬁne tune the picture.

Press  button to enter.

• Color

• Tint

• Sharpness

• Color Temperature

arrow button to highlight Picture Mode, then press the arrow button to select your viewing preference from 5 factory options: Standard - Dynamic - Soft - User - Power Saving. The Standard setting is recommended for most brightly lit

Pi ctu

Co lo

Tin t

Sh ar

Co lo

Contrast

Color T

Brightness Contrast

Picture Mode

Standard

Normal

Brightness

Contrast

Color

Tint

Sharpness

Color Temperature

Advanced Settings

V4040HD-20

Select

Move

Exit

Page 22

Menu Adjustments

Audio Settings

The Audio menu offers options to make sound enhancements while listening through the built-in speakers or to select digital audio options when connected to a Dolby Digital receiver though an optical digital output.

How to Navigate:

Press the MENU button on the remote control. Navigate using t u arrow buttons to select Sound. Press the q arrow button to highlight Sound Mode, then press the u arrow button to select your sound preference from 5 factory options: Music - Movie - Sports - User - Standard

Press down q arrow button to highlight Sound Mode. Press

Press

t u button to select Music - Movie - Sports - User -

Standard.

Music: Preserves the original sound. Good for musical programs. Movie: Enhances treble and bass for a rich sound experience. Sports: Enhances vocals for TV audio.

User: Select to customize audio settings.

Standard: Produces a balanced sound in all environments.

• MTS

Press down q arrow button to highlight MTS. Press t u button to select Mono - Stereo - SAP. Mono: Sets the sound to mono. Stereo: Sets the sound to stereo when stereo is not available. The sound is automatically switched to mono. SAP: Sets the sound to the second audio program.

• Audio Language

Press down q arrow button to highlight Audio Language. Press t u button to select English - Francais - Español.

• Digital Audio Output

Press pq button to highlight Digital Audio Output. Press t u button to select (Raw - Off - PCM)

• Surround Sound

Presspqbutton to select Surround Sound. Presst u button to select (Off - On)

• AVL

Press down q arrow button to highlight AVL. Press t u button to select (Off - On)

Note: When adjustments are completed, you may select another menu by pressing the Menu button.

• Sound Mode

• Bass

• Treble

• Balance

Press down q arrow button to highlight Bass.

Press down q arrow button to highlight Treble.

t u

Press

t u

buttons to increase or decrease low frequency

Press

t u

buttons to increase or decrease high frequency

intensity.

buttons to adjust sound towards the left or right

speaker.

V4040HD-21

Sound Mode

Bass

Treble

Balance

MTS

Standard

Digital Audio output

Audio Language

Surround sound

AVL

Stereo

English

Off

Raw

Off

Select

Move

Exit

Page 23

Menu Adjustments

Date & Time Settings

Note: When adjustments are completed, you may select another menu by pressing the Menu button.

The Time menu includes adjustment of settings for your local time zone and daylight savings time. The clock will adjust automatically after the initial Channel Auto Scan of available broadcast channels in your area.

How to Navigate:

Press the MENU button on the remote control. Navigate using arrow   buttons to select Time.

• Press down  arrow button to highlight Sleep Timer then press the  arrow button to select time to view before the television timer turns the set off: 5 Min - 10 Min - 15 Min - 30 Min - 60 Min - 90 Min - 120Min - 180 Min - 240 Min - OFF.

• Press down  arrow button to highlight Time Zone then

press the  arrow button to select between: Eastern - Central

- Mountain - Paciﬁc - Alaska - Hawaii - Samoa - Newfoundland

- Atlantic.

• Press down  arrow button to highlight Daylight Savings Time. Navigate using the   arrow buttons to select

On or Off.

• Press down  arrow button to highlight Time Format. Navigate using the   arrow buttons to select either 12-hour or 24-hour.

• Press down  arrow button to highlight Auto Clock. Navigate using the   arrow buttons to turn this feature

On or Off.

• Clock and Date are automatically set the ﬁrst time the tuner

receives a broadcast channel.

V4040HD-22

Select

Move

Exit

Time Zone

Daylight Saving Time

Time Format

Auto Clock

12-hour

Clock

Off

Pacific

2015/01/01/12:27 AM

Sleep Timer

Off

Page 24

Menu Adjustments

Setup Settings

In the Setup menu you may change the initial set up of preferences that include settings for language, menu display, computer monitoring, closed captions, enhancement of black detail in the picture and resetting your TV back to its factory default status.

How to Navigate:

Press the MENU button on the remote control. Navigate using arrow   buttons to select Setup. Gain access to display options by pressing the down  arrow button to highlight Menu Language or other options, then press  arrow button on your remote to select.

NOTE: Closed Caption and Advanced are features described on the following pages.

Select Move Exit

Menu Language

Transparent

Closed Caption Over Scan

OSD Time out

Other Settings

Input Label

Restore Default Setup Wizard

English

25%

30Sec.

Move Next Return

Menu Language

Transparent

Closed Caption

Over Scan

OSD Time out

Other Settings

Input Label

Restore Default

Setup Wizard

English

25%

30Sec.

Move Return

Menu Language

Transparent

Closed Caption

Over Scan

OSD Time out

Other Settings

Input Label

Restore Default

Setup Wizard

English

25%

30Sec.

Select Move Exit

Menu Language

Transparent

Closed Caption Over Scan

OSD Time out

Other Settings

Input Label

Restore Default Setup Wizard

English

25%

30Sec.

CEC

Select Move Exit

Menu Language Transparent

Closed Caption Over Scan

OSD Time out

Other Settings

Input Label

Restore Default Setup Wizard

English

25%

30Sec.

CEC

Select Move Exit

Menu Language Transparent

Closed Caption Over Scan

OSD Time out

Other Settings

Input Label

Restore Default Setup Wizard

English

25%

30Sec.

CEC

Select Move Exit

Menu Language Transparent

Closed Caption Over Scan

OSD Time out

Other Settings

Input Label

Restore Default Setup Wizard

English

25%

30Sec.

CEC

Select Move Exit

Menu Language Transparent

Closed Caption Over Scan

OSD Time out

Other Settings

Input Label

Restore Default

Setup Wizard

English

25%

30Sec.

CEC

Select Move Exit

Menu Language Transparent

Closed Caption Over Scan

OSD Time out

Other Settings

Input Label

Restore Default

Setup Wizard

English

25%

30Sec.

CEC

Other languages include English, Français, Español.

Navigate using the   arrow buttons to adjust the transparency of the

Adjust the duration of the OSD (on screen display) menu. Press   button to select.

• Menu Languages • Transparent • OSD Time Out

on screen display menu.

Create labels for the devices connected to your TV. Press ENTER /  button to enter.

Adjust the settings for Audio Only, No Signal Power Off, and No Operation Power Off. Press ENTER /  button to enter.

Press the  arrow but ton to automatically reset all adjustments

back to their original factory settings.

• Input Label • Other Settings • Restore Default

• Setup Wizard

Set the ﬁrst time installation.

Press ENTER /  button to enter.

The TV will request confirmation.

V4040HD-23

Move Return

Menu Language

Transparent

Closed Caption

Over Scan

OSD Time out

Other Settings

Input Label

Restore Default

Setup Wizard

English

25%

30Sec.

Move Next Return

Menu Language

Transparent

Closed Caption

Over Scan

OSD Time out

Other Settings

Input Label

Restore Default

Setup Wizard

English

25%

30Sec.

Move Next Return

Menu Language

Transparent

Closed Caption

Over Scan

OSD Time out

Other Settings

Input Label

Restore Default

Setup Wizard

English

25%

30Sec.

Move Next Return

Menu Language

Transparent

Closed Caption

Over Scan

OSD Time out

Other Settings

Input Label

Restore Default

Setup Wizard

English

25%

30Sec.

Move Next Return

Menu Language

Transparent

Closed Caption

Over Scan

OSD Time out

Other Settings

Input Label

Restore Default

Setup Wizard

English

25%

30Sec.

Move Return

Menu Language

Transparent

Closed Caption

Over Scan

OSD Time out

Other Settings

Input Label

Restore Default

Setup Wizard

English

25%

30Sec.

Select

Page 25

Menu Adjustments

Note: When adjustments are completed, you may select another menu by pressing the Menu button.

Closed Captions

The Setup menu includes adjustments for activating the Closed Caption text feature for display on-screen and customiz- ing CC display types and font styles.

How to Navigate:

Press the MENU button on the remote control. Navigate using arrow   buttons to select Setup.

• Press the down  arrow button to highlight Closed Caption then press the  arrow button to highlight CC Mode.

• Navigate using the   arrow buttons to select CC Off - CC On - CC on Mute.

• Press down  arrow button to highlight Analog CC. Navigate using the   arrow buttons to select CC1-4, TEXT1-4.

• Press down  arrow button to highlight Digital CC. Navigate using the   arrow buttons to select Off, Service 1-6.

• Press down  arrow button to highlight Option. Press the  arrow button to enter a menu with options to customize text fonts, colors and opacities.

Select Move Exit

Menu Language Transparent

Closed Caption

Over Scan

OSD Time out

Other Settings

Input Label

Restore Default Setup Wizard

English

25%

30Sec.

CEC

Select Move Exit

CC Mode Analog CC

Option

Digital CC

CC Off

CC1

Service1

V4040HD-24

Move Next Return

Menu Language

Transparent

Closed Caption

Over Scan

OSD Time out

Other Settings

Input Label

Restore Default

Setup Wizard

English

25%

30Sec.

Move Next Return

CC Mode

Analog CC

Option

Digital CC

CC On

CC1

Service1

Move Select Return

CC Mode

Analog CC

Option

Digital CC

CC On

CC1

Service1

Move Select Return

CC Mode

Analog CC

Option

Digital CC

CC On

CC1

Service1

Move Return

CC Mode

Analog CC

Option

Digital CC

CC On

CC1

Service1

Select

Page 26

V4040HD-25

Menu Adjustments

CEC Settings

The CEC menu includes options for controlling functions of compatible external devices connected via the HDMI input.

Please refer to the instruction manual of your connected device to confirm if CEC control is possible.

How to Navigate:

Press the MENU button on the remote control. Navigate using arrow   buttons to select Setup

• Press the down  arrow button to highlight CEC then press the  arrow button to highlight CEC Control.

• Navigate using the   arrow buttons to select On - O ff. When you select On, the CEC functions open. Otherwise the CEC functions close.

• Press the down  arrow button

to highlight Device Auto Power Off. Navigate using the   arrow buttons to select On - Off.

If this item is “On”, the external device will be turned off automatically when the TV is powered off

• Press down  arrow button to highlight TV Auto Power On. Navigate using the   arrow buttons to select On - Off

If this item is “On”, when the TV is turned on, the external device will turn to HDMI mode automatically during powering on.

If this item is “On”, users can control the volume of the external amplifier through adjusting the TV's volume.

• Press down  arrow button to highlight Audio Receiver. Press the  arrow button to select On - Off.

Note: When adjustments are completed, you may select another menu by pressing the Menu button.

• Press the  arrow button to highlight Connect. Press the  arrow button to connect TV and DVD Player.

• Press the  arrow button to highlight Root Menu. Press the  arrow button to enter DVD menu.

• Press the  arrow button to highlight Device Lists. Press the  arrow button to enter.

Move Select Return

Device Auto Power Off

Audio Receiver

TV Auto Power On

Connect

Root Menu

Off Off

Off

Device Lists

CEC Control On

Move Select Return

Audio Receiver

TV Auto Power On

Connect

Root Menu

Off Off

CEC Control On

Device Auto Power Off

Off

Device Lists

Menu Language Transparent

Closed Caption Over Scan

OSD Time out

Other Settings

Input Label

Restore Default Setup Wizard

English

25%

30Sec.

CEC

Move Select Return

Audio Receiver

Connect

Root Menu

Off

CEC Control On Device Auto Power Off

Off

TV Auto Power On

Off

Device Lists

Move Select Return

Root Menu

CEC Control On Device Auto Power Off

Off

TV Auto Power On

Off

Connect

Audio Receiver

Off

Device Lists

Move Next Return

Root Menu

CEC Control On Device Auto Power Off

Off

TV Auto Power On

Off

Connect

Audio Receiver

Off

Device Lists

Move Next Return

Audio Receiver

Root Menu

Off

CEC Control On Device Auto Power Off

Off

TV Auto Power On

Off

Connect

Move Next Return

Audio Receiver

Off

CEC Control On Device Auto Power Off

Off

TV Auto Power On

Off

Connect

Device Lists

Root Menu

Move Next Return

Page 27

NOTE: PRT Setting and Reset RRT are not user adjustable settings.

Menu Adjustments

USA Parental Control

In the Lock menu, you may block television and movie programming based on TV ratings and Motion Picture Association guidelines. To gain access and select your preferences within the Parental menu make certain your input is set to TV.

How to Navigate:

Press the MENU button on the remote control. Navigate using arrow   buttons to select Lock. Gain access to parental rating options by pressing the down  arrow button to highlight Enter Password. Enter your 4 digit code (factory default code is “0000”) unless previously changed.

• To change the password, press  arrow button to display a screen to enter your new password, then

conﬁrm again. (not illustrated)

• To make changes to parental

controls, highlight System Lock then press the   arrow button to ON.

• To set parental controls for television programming or DVD movies, press the  arrow buttons to highlight

Navigate using the   buttons to highlight TV / MPAA menu.

• Highlight TV, then press the  arrow button to enter the TV Ratings menu and select your preference.

• Highlight MPAA, then press the  arrow button repeatedly to select your movie rating preference.

TV-Y

Appropriate for all children

TV-Y7

Appropriate for children over 7

TV-G General Audience TV-PG Parental Guidance Suggested TV-14 Parents Strongly Cautioned

TV-MA Mature Audience Only

G General Audience PG Parental Guidance Suggested PG-13 Parents Strongly Cautioned R Restricted NC-17 No One Under 17 Permitted

X Adults Only

US Rating.

Change Password

System Lock

US Canada

PRT Setting Reset RRT

Select Move Exit

Input Block

MPAA G

Select Move Exit

MPAA Off

Select Move Exit

TV RATING

Press ENTER to Lock or Unlock: BLock

ALL FV VS LD TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA

Select Move Exit

V4040HD-26

Select Move Exit

Select

Move

Exit

Enter Password

----

Move

Select

Return

Change Password

System Lock

Input Block

US Rating

Canada Rating

PRT Setting

Reset RRT

Off

Move

Return

Change Password

System Lock

Input Block

US Rating

Canada Rating

PRT Setting

Reset RRT

Off

Move

Return

Enter Password

----

MPAA Off

MPAA G

Move

Select

Return

Move

Select

Return

TVRating

Press ENTER to Lock or Unlock: BLock

ALL FV V S L D TV-Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

Page 28

Menu Adjustments

Canadian Parental Control

In the Lock menu, you may block television and movie programming based on Canadian TV and movie rating guidelines. To gain access and select your preferences within the Parental menu make certain your input is set to TV.

How to Navigate:

Press the MENU button on the remote control. Navigate using arrow t u buttons to select Lock. Gain access to rating options by pressing the q arrow button to highlight Enter Password. Enter your 4 digit code (The factory default code is “0000”) unless previously changed. Then press the qp arrow buttons to highlight Canada. Navigate using the t u buttons to highlight Canada English.

• Navigate using the q arrow button to highlight Canada English then press the t u arrow button repeatedly to select your ratings preference.

• Navigate using the

q arrow button to highlight

Canada French then press the t u arrow button repeatedly to select your ratings preference.

Note: When adjustments are completed, you may select another menu by pressing the Menu button.

Off Turn Off C

Appropriate for all children

C8+ Appropriate for everyone 8 years old and up G General Audience PG Parental Guidance 14+ Appropriate for Children over 14 years old 18+ Mature Audience Only

Off Turn Off G General Audience 8 ans+ Appropriate for Children 8 years old and up 13 ans+ Appropriate for Children 13 years old and up 16 ans+ Appropriate for Children 16 years old and up 18 ans+ Mature Audience Only

Move Select Return

Canada English

Canada French Off

Off

Move Select Return

Canada English

Canada French Off

Off

V4040HD-27

Page 29

V4040HD-28

Return

Page 30

TV Settings

TV Provider Changes & Channel Auto Scan After Initial Setup

To enter the Channel Menu:

•

Press the MENU button

• Using the   arrow buttons; scroll to highlight Channel

• Press the down  arrow buttons to highlight Air / Cable

Select Cable if you subscribe to a pay television service without a set top box.

• Press the   arrow buttons to highlight Cable.

•

NOTE: Channel Auto Scan may take several minutes to complete.

Cable Mode

Air Mode

Select Air when TV is connected to an indoor / outdoor antenna.

• Press the   arrow button to highlight Air.

•

NOTE: Channel Auto Scan may take several minutes to complete.

satellite set top box to one of the available inputs on the TV for viewing.

Note: For Cable or Satellite users with a set-top box, there is no need to run Channel Auto Scan. Connect your cable

To make changes your TV provider or re-scan for available broadcast channels in your area, select the Channel Menu.

Press the  arrow button to highlight Auto Scan and press ENTER. Press the  arrow button to highlight YES and press ENTER to begin Auto Scan.

Are you sure to Auto Scan?

Yes

Are you sure to Auto Scan?

Yes

Total Found : 0

Analog : 0 Digital : 0 RF CH : 2

Channel List

Show/Hide

Channel Number

Channel Label

5-2

KSTP-SD

Total Found : 0

Analog : 0 Digital : 0 RF CH : 2

Favorite

Auto Scan

V4040HD-29

Cable

Select

Return

Select

Return

Page 31

Aspect Modes

1. NORMAL

Recommended for viewing native widescreen content and undistorted 4:3 images (with black bars).

2. WIDE

Stretches certain 4:3 content and may reduce visible black bars.

3. ZOOM

viewing widescreen content. The Zoom effect will crop images somewhat.

4. CINEMA

n eliminating visible side black bars. It may also eliminate or reduce black bars on certain widescreen movies.

Press ASPECT to cycle through the following widescreen settings.

The ASPECT function offers several viewing display options on the 16:9 screen. Press the ASPECT button to cycle through the following widescreen settings.

NOTE: The ASPECT function is not available for digital broadcasts.

V4040HD-30

Page 32

V4040HD-31

Media

Media in the

Source Select

Component

HDMI1 HDMI2 HDMI3 HDMI4

Media

Page 33

MHL Setting

Connecting an MHL-enabled device

You can connect a MHL-enabled device, such as certain models of smartphones & tablets, and view the device’s screen on the TV. Connecting a MHL-enabled device to the HDMI4 (MHL) input requires a special MHL cable. (Not included)

To connect an MHL-enabled device:

3.4.Connect a MHL cable to the micro USB port on the device, then connect the other end of the cable to the

HDMI4 (MHL) jack on the TV.

1. Press INPUT to open the TV Input Source list.

2. Press or to select HDMI4, then press ENTER.

You should now see the screen image of your connected device on the TV.

MHL-Enabled DeviceHDMI Cable with

HDMI-to-MHL Adatper

V4040HD-32

Page 34

UHD LED

40” Diagonal

16:9

480p / 720p / 1080i / 1080p / 2160p

3840x2160

200

3000:1

178°

16.7M

120 W

2 x 8W

36.6” (W) x 21.7” (H) x 3.3” (D)

24.2 lbs

Composite Video

Y Pb Pr

HDMI

HDMI with MHL

CABLE-ANTENNA

Optical

AUDIO out

USB

Weight (may vary 10%)

V4040HD-33

Page 35

Troubleshooting

Symptom Possible Solutions

Cannot receive certain channels through the antenna

• Perform Channel Scan to add channels into the TV tuner memory. See page 28.

• Readjust your antenna and retry Auto Channel Scan.

• Signal from the TV station may be weak in your area.

No color • Check the video installation of your external A / V equipment.

See pages 13-17.

Video noise or choppy picture • Readjust antenna. Keep TV away from noise sources, neon lights,

and microwave appliances.

TV blocked on certain channels • Perform Channel Scan to add channels into the TV tuner memory.

See page 19.

• Check whether the channel was deleted. See page 28.

• Check parental control settings. See page 26,27.

• Restore default settings. See page 23.

Cannot use certain functions • If the item chosen in a menu is shown in gray text, that item cannot be

selected in the current input.

No sound • Check that connected audio cables are completely inserted.

See page 21.

• Mute function may be enabled, press mute on the remote.

Black box on screen • The “Text” option is enabled and no text is available.

• Press the CCD button on the remote control to turn off.

No power • Batteries in the remote control may need replacing.

• Re-attach AC plug to wall outlet.

No picture • Digital TV channel signal maybe weak, try another channel.

• Press INPUT button to verify the desired input selected.

• Re-connect the antenna or cable wiring.

• Restore default settings. See page 23.

Remote control does not function • Replace batteries with new ones.

• Check that battery polarity is correct.

• Point remote directly at the TV’s IR receiver. See page 8.

V4040HD-34

Page 36

LIMITED ONE-YEAR TELEVISION WARRANTY

We warrant this product to be free from defects in material and workmanship under normal use for a one-year period from the original date of purchase from an authorized VIDAO dealer. We will repair or replace the unit free of charge should it become defective under this warranty, providing you, the original purchaser, submit proof of purchase (sales slip) along with the TV and all accessories.

Should you be missing any of the included accessories or other components (screws, pieces, etc.), please contact the Customer Support Center to secure a replacement. It is not necessary to bring the unit back to the store. When calling, please reference the parts list found in the Instruction Manual to help us accurately identify the missing parts and promptly provide replacements.

During the one-year period from the original purchase date, we will service or exchange the TV, at no charge. To obtain warranty service or replacement within the duration of the one-year warranty, please return the product and all accessories to the original place of purchase.

For technical support, visit our website www.sibrandssupport.com or call the VIDAO Technical Support Center for technical assistance or troubleshooting at 1-855-998-4326, Monday to Saturday, 10:00AM TO 7:00PM EST.

There are no consumer serviceable parts contained in this product and any attempt by the owner to service or repair the unit will immediately void all warranty coverage.

This warranty does not cover any product which has been subject to damage due to an act of nature, misuse, neglect, accident, abuse, outdoor use, commercial use, or modification of, or to, any part of the product, including the antenna. Damage to any external media such as DVD, CD, and/or USB or other memory devices are not covered nor is the cost incurred in shipping the unit for warranty repair. Under no circumstances shall VIDAO be liable for any loss (direct, indirect, incidental, foreseen, unforeseen, special or consequential) or for any damage arising out of, or in connection with, the use of this product.

UNDER NO CIRCUMSTANCES WILL VIDAO BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.

This warranty does not cover re-manufactured units, or product sold 'As Is'.

This warranty is valid only to the original purchaser of the Product in the United States and Canada and grants specific legal rights.

V4040HD-35