Victrola VTA-800B Instruction Manual

1

MODEL: VTA-800B

5-IN-1 TURNTABLE

Instruction Manual

PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY

BEFORE USEAND KEEP IT FOR FUTURE REFERENCE.

2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVERTISENT:RISQUE DE CHOC ÉLECTRIQUE – NE PAS OUVRIR.

-"This"lightning"flash" with"arrowhead"symbol"within"an" equilateral"triangle"is"intended"to"alert"the"user"to"the"presence"
of"non-insulated"“dangerou s"voltage”"within" the "product’s"enclosure" th at"may"be"of"sufficient"magnitude"to"constitute"
a"risk"of"electric"shock."

-"Warning:"To"reduce"the"risk"of"electric"shock,"do"not"remove"cover"(or"back)"as"there"are"no"user-serviceable"parts"
inside."Refer"servicing"to"qualified"personnel."

-" The" exclamation" point" within" an" equilateral" triangle" is" intended" to" alert" the" user" to" the" presence" of" im portant"
operating"and"maintenance"instructions"in"the"literature"accompanying"the"appliance."

CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle

or other outlet unless the blades can be fully inserted to prevent blade exposure

WARNING: Invisible laser radiation when open and interlock failed or defeated. Avoid direct
exposure to laser beam.

Important Safety Instructions

1. Read these instructions – All the safety and operating instructions should be read before this product is

operated.

2. Keep these instructions- The safety and operating instructions should be retained for future reference.

3. Heed all warnings – All warnings on the appliance and in the operating instructions should be

adhered to.

4. Follow all instructions – All operating and use instructions should be followed.

5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for

example, in a wet basement or near a swimming pool, and the like.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with

one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at the

plugs, convenience receptacles, and at the point where they exit from the
apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart or rack is used, use
caution when moving the cart/apparatus combination to avoid injury from
tip-over.

13. Unplug the apparatus during lighting storms or when unused for long periods of time.

14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in

any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.

3

15.

-This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.

-Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable
parts inside. Refer servicing to qualified personnel.

-The exclamation point within and equilateral triangle is intended to alert the user to the presence of important
operating and maintenance instructions in the literature accompanying the appliance.

16.

This equipment is a ClassⅡor double insulated electrical appliance. It has been designed in such a way that it
does not require a safety connection to electrical earth.

17. The mains plug is used as disconnect device, the disconnect device shall remain readily operable.

18. WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The
apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as
vases, shall not be placed on apparatus.

19. The equipment should always be used in a moderate climate.

20. The ventilation should not be impeded by covering the ventilation openings with items, such as

newspapers, table-cloths, curtains, etc.

21. No naked flame sources, such as lighted candles, should be placed on the apparatus.

22. The symbol with Indicates AC voltage.

23. CAUTION: The servicing instructions are for qualified service personnel only. To reduce the risk of

electric shock, do not perform any services other than that stated in the operation manual unless you are
qualified to do so.

4

Product Overview

Control Panel (Overhead View)

1. LCD Display

2. PREVIOUS TRACK In CD Mode, press once to skip to the previous track.

Press and hold to rewind.
In BT Mode, press to select track.

(Note: This button will not work in PHONO, Radio, AUX mode)

3. STOP Press to stop playback or cancel the program setting.

(Note: This button will not work in PHONO, AUX, Bluetooth mode)

4. POWER / FUNC Press to turn the unit ON/OFF.

(Note: Press the button to turn on /press and hold for about 3 seconds to turn off.)
Press to select desired function(CD, RADIO, AUX, BT, PHONO).

5. “PROG.”: While in CD stop mode, press to program tracks.

(Note: This indicator only works in CD mode.)

6. “REPEAT” Press to select the repeat/shuffle mode.

(Note: This indicator only works in CD mode.)

7. “VOL-” Press to adjust volume.

8. “VOL+” Press to adjust volume.

9. 3.5mm AUX-IN JACK Connect your external device via AUX-IN.

10. 3.5mm HEADPHONE JACK Connect your headphones or earphones.

11. OPEN/CLOSE In CD mode, use to open and close the disc tray.

12. NEXT TRACK In CD Mode, press once to skip to the next track.

Press and hold to fast forward.
In BT Mode, press once to select track.

(Note: This button will not work in PHONO, AUX mode)

13. PLAY/PAUSE Press to start playback, press again to pause playback.
(Note: This button only works in CD and BT mode.)

5

Left Side View

14. DISC TRAY

Rear View

15. LINE-OUT Jacks

For amplifier device with RCA auxiliary input sockets, insert the white and red plugs on the RCA
cable into the unit. Insert the opposite end into the amplifier device. Be sure to connect the white
plug to the white jack and the red plug to the red jack.

16. AC Power Cord

Connect the AC plug into a wall outlet.