Victrola BROOKLYN VSC-590BT User Manual

BROOKLYN
3-IN-1 BLUETOOTH TURNTABLE
MODEL: VSC-590BT
1. Read these instructions – All the safety and operating instructions should be read before this product is
operated.
2. Keep these instructions–The safety and operating instructions should be retained for future reference.
3. Heed all warnings–All warnings on the appliance and in the operating instructions should be
adhered to.
4. Follow all instructions – All operating and use instructions should be followed.
5. Do not use this apparatus near water – The appliance should not be used near water or moisture –
for example, in a wet basement or near a swimming pool, and the like.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with
one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles,
and at the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug the apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in
any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
16. WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus.
17. The use of the equipment in moderate climate.
18. The ventilation should not be impeded by covering the ventilation openings with items such as, newspapers,
tablecloths, curtains, etc.
19. No naked flame sources, such as lighted candles, should be placed on the apparatus.
20. The symbol with Indication AC voltage.
21. The symbol with indicate DC voltage.
22. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
23. WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle
or other outlet unless the blades can be fully inserted to prevent blade exposure.
24. WARNING: Please refer to the information on the exterior bottom enclosure for electrical and safety
information before installing or operating the apparatus.
ACCESSORIES INCLUDED:
• RCA LINE OUT CABLE
• INSTRUCTION MANUAL
• WARRANTY (BACK OF MANUAL)
• 45 RPM ADAPTER
• TURNTABLE OPERATION SHEET
• AC/DC ADAPTOR
Product Overview
Top View
1. 3.5mm AUX-IN JACK: Connect your external source to the AUX-IN jack.
2. Headphone socket:
To listen to the unit using headphones, insert headphone jack into Headphone socket.
3. POWER
/VOLUME: Rotate power/volume knob clockwise to turn the unit ON.
Rotate power/volume knob counter-clockwise to turn the unit OFF. When unit is ON, rotate to adjust the volume.
4. Indicator: When unit is ON, the LED indicator will illuminate red.
In Bluetooth mode, it will illuminate blue.
5. “PHONO, AUX, BT” SELECTION KNOB
: Rotate to select desired function.
Rear View
6. LINE OUT jacks
For amplifier device with RCA auxiliary input sockets, insert the white and red plugs on the RCA cable into the unit. Insert the opposite end into the amplifier device. Be sure to connect the white plug to the white jack and the red plug to the red jack.
7. DC IN Socket
Plug the DC plug of AC/DC adapter into the socket.
Parts of the Turntable
A. Turntable
B. 45 RPM adaptor
C. Cue-lever - Use this lever to lift the tone arm.
D. Speed Selector
E. Tone Arm -
Before use, completely loosen the twist tie on the tone arm to lift tone arm.
F. Tone Arm holder
G. Stylus
Loading...
+ 8 hidden pages