Victory-Raetone VSPD60-16-4 User Manual

Sandwich prep tables

with Drawers

FEATURING:

VSPD60-16-4

Secure-Temp 1.0™ is standard on all Victory models and is

- Equipped with Secure-Temp 1.0™ Technology™

- 3 Year Parts & Labor Warranty Plus an Additional
2 Year Compressor Warranty

- Exclusive 2 Year Warranty on Santoprene Door Gaskets

STANDARD FEATURES

 Secure-Temp 1.0™ Technology

 Front-Breathing Refrigeration System

 Full Electronic Control

 Expansion Valve Technology

 Stainless Steel Exterior/Stainless Steel Interior

 Santoprene Door Gaskets with Exclusive 2 Year Warranty

 Environmentally Friendly R134A Refrigerant

 CFC Free Foamed In-Place Polyurethane

Secure-Temp 1.0™ is the industry’s first and only full

service temperature monitoring solution for your kitchen.

HACCP compliant & meets NAFEM’s data protocol.

There are NO software or monthly monitoring fees.

Optional add on kits are available for additional units.

IMAGE COMING SOON

VSPD60-16-4

 Heavy Duty Stainless Steel Drawer Frames

 Telescoping Drawers Slides with Locking Mechanism

 Upper Pull-Out Drawers Accommodate 4” Deep Pans (pans not included)

 Lower Pull-Out Drawers Accommodate 6” Deep Pans (pans not included)

 Heavy Duty pan divider supports supplied

 Hinged, Insulated Lift Up Lids

 Locking Divider Bars

 Stainless Steel Pan Dividers

 10” Wide Cutting Board

 6” Casters, 2 With Brakes, Standard

OPTIONS & ACCESSORIES

 ADA Compliant 3” Diameter Casters

 6” Overall Height Adjustable SS Legs

 Single and Double Overshelves

 Stainless Steel Back

 Cylinder Locks

 Optional Voltages: 220/50/1, 220/60/1

3779 Champion Blvd—Winston-Salem, NC 27105

PH: [phone] - Fax: [phone]

[e-mail] www.victoryrefrigeration.com

FEATURING:

CABINET CONSTRUCTION

Exterior construction includes heavy-duty stainless steel finish on front, sides,

top, door(s) and grille. Removable hoods and insulated lid assemblies are
made of matching stainless steel. Cabinet back and bottom are constructed of
galvanized steel. Interior liner is made of aluminum for superior resistance to
corrosion.

Cabinet insulation is CFC free foamed-in-place polyurethane of two-inch mini­mum thickness. Six-inch casters, 2 with brakes, are standard. Legs are availa­ble as an option.

Composite cutting board supplied with cabinet is 10” wide. It is readily remova­ble for cleaning. Two epoxy-coated steel wire shelves per section are supplied
as standard. Pans furnished are 4” deep and made of polycarbonate plastic.

DRAWER CONSTRUCTION

Drawer frames are constructed of heavy-duty stainless steel and are supported
on heavy-duty telescoping drawer slides for maximum support of stored food
products. Slides have locking mechanism to prevent from drawers being pulled
off of cabinets. Upper pull-out drawers accommodate 4” deep pans. Lower pull

-out drawers accommodate up to 6” deep pans. Heavy-duty pan divider sup­ports are supplied. Foodservice pans for drawers are not included. Snap-type

vinyl magnetic gasket is attached to each drawer for positive seal.

REFRIGERATION SYSTEM

More robust refrigeration system provides added capacity and efficiency. Sys­tems are designed using CFC free R134a refrigerant and expansion valve be­tween condenser and evaporator. Recirculated, forced air from evaporator is
moved under pans, which are recessed 2” from top of cabinet. Forced air over
the condenser is drawn through grille under door as well as the back and bot­tom of cabinet. Automatic condensate evaporator is provided to eliminate the
need of floor drains.

CHARACTERISTICS VSPD60-16-4

Net Capacity (cu. ft.) 17.1

Width, Overall (in.) 60”

Depth, Overall (in.) 31”

Depth, Door(s) Open 90° (in.) 55 1/8”

Height Overall 41 11/16”

No. Shelves -

No. of Doors/Drawers -/4

ELECTRICAL DATA

Condensing Unit Voltage 115/60/1

Total Amperes 9.6

NOTE: Plug style, v ol tage and fu ll lo ad am ps may var y depen di ng on
certain options selected such as optional voltages and compressor upgrades.

REFRIGERATION DATA

Condensing Unit Size 1/3 HP

Refrigerant R-134A

CRATED WEIGHT 360 LBS

* Remote units use R-404A refrigerant standard and come with 6” legs

We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements
for previously purchased equipment. Dimensional tolerances +/ - 1⁄4”. Metric dimensions (MM)

01/17