Victory-Raetone VSPD60-16-2 User Manual

Sandwich prep tables

with Drawers

FEATURING:

VSPD60-16-2

Secure-Temp 1.0™ is standard on all Victory models and is

- Equipped with Secure-Temp 1.0™ Technology™

- 3 Year Parts & Labor Warranty Plus an Additional
2 Year Compressor Warranty

- Exclusive 2 Year Warranty on Santoprene Door Gaskets

STANDARD FEATURES

 Secure-Temp 1.0™ Technology

 Front-Breathing Refrigeration System

 Full Electronic Control

 Expansion Valve Technology

 Stainless Steel Exterior/Stainless Steel Interior

 Santoprene Door Gaskets with Exclusive 2 Year Warranty

 Environmentally Friendly R134A Refrigerant

 CFC Free Foamed In-Place Polyurethane

 Self-Closing Doors with 120° Hold Open feature

Secure-Temp 1.0™ is the industry’s first and only full

service temperature monitoring solution for your kitchen.

HACCP compliant & meets NAFEM’s data protocol.

There are NO software or monthly monitoring fees.

Optional add on kits are available for additional units.

IMAGE COMING SOON

VSPD60-16-2

 2 Shelves Standard Per Door Section

 Heavy Duty Stainless Steel Drawer Frames

 Telescoping Drawers Slides with Locking Mechanism

 Upper Pull-Out Drawers Accommodate 4” Deep Pans (pans not included)

 Lower Pull-Out Drawers Accommodate 6” Deep Pans (pans not included)

 Heavy Duty pan divider supports supplied

 Hinged, Insulated Lift Up Lids

 Locking Divider Bars

 Stainless Steel Pan Dividers

 10” Wide Cutting Board

 6” Casters, 2 With Brakes, Standard

OPTIONS & ACCESSORIES

 ADA Compliant 3” Diameter Casters

 6” Overall Height Adjustable SS Legs

 Single and Double Overshelves

 Stainless Steel Back

 Cylinder Locks

 Optional Voltages: 220/50/1, 220/60/1

3779 Champion Blvd—Winston-Salem, NC 27105

PH: [phone] - Fax: [phone]

[e-mail] www.victoryrefrigeration.com

FEATURING:

CABINET CONSTRUCTION

Exterior construction includes heavy-duty stainless steel finish on front,

sides, top, door(s) and grille. Removable hoods and insulated lid as­semblies are made of matching stainless steel. Cabinet back and bot­tom are constructed of galvanized steel. Interior liner is made of alumi­num for superior resistance to corrosion.

Cabinet insulation is CFC free foamed-in-place polyurethane of two­inch minimum thickness. Six-inch casters, 2 with brakes, are standard.
Legs are available as an option.

Composite cutting board supplied with cabinet is 10” wide. It is readily
removable for cleaning. Two epoxy-coated steel wire shelves per sec­tion are supplied as standard. Pans furnished are 4” deep and made of
polycarbonate plastic.

DOOR CONSTRUCTION

Doors are mounted to face of cabinet on cartridge style hinges permit­ting them to self-close under their own weight. Hinges also allow doors
to stay open 120° and permit easy door removal for service and clean­ing if required. A plug in type vinyl magnetic gasket is attached to each
door for positive seal. Door handle contoured to permit easy opening

of doors with fingers from both top and bottom of handle.

DRAWER CONSTRUCTION

Drawer frames are constructed of heavy-duty stainless steel and are
supported on heavy-duty telescoping drawer slides for maximum sup­port of stored food products. Slides have locking mechanism to pre­vent from drawers being pulled off of cabinets. Upper pull-out drawers
accommodate 4” deep pans. Lower pull-out drawers accommodate up
to 6” deep pans. Heavy-duty pan divider supports are supplied. Food­service pans for drawers are not included. Snap-type vinyl magnetic
gasket is attached to each drawer for positive seal.

REFRIGERATION SYSTEM

More robust refrigeration system provides added capacity and efficien­cy. Systems are designed using CFC free R134a refrigerant and ex­pansion valve between condenser and evaporator. Recirculated,
forced air from evaporator is moved under pans, which are recessed 2”
from top of cabinet. Forced air over the condenser is drawn through
grille under door as well as the back and bottom of cabinet. Automatic
condensate evaporator is provided to eliminate the need of floor
drains.

CHARACTERISTICS VSPD60-16-2

Net Capacity (cu. ft.) 17.1

Width, Overall (in.) 60”

Depth, Overall (in.) 31”

Depth, Door(s) Open 90° (in.) 55 1/8”

Height Overall 41 11/16”

No. Shelves 2

No. of 1/6 Pans 16

No. of Doors/Drawers 1/2

ELECTRICAL DATA

Condensing Unit Voltage 115/60/1

Total Amperes 9.6

NOTE: Plug st yl e, vo lt age an d f ul l l oad amp s m ay vary depending on

certain options selected such as optional voltages and compressor upgrades.

REFRIGERATION DATA

Condensing Unit Size 1/3 HP

Refrigerant R-134A

CRATED WEIGHT 355 LBS

* Remote units use R-404A refrigerant standard and come with 6” legs

We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements
for previously purchased equipment. Dimensional tolerances +/ - 1⁄4”. Metric dimensions (MM)

01/17