Victory-Raetone VSP48-12 User Manual
Sandwich Prep Table
VSP48-12
- Equipped with Secure-Temp 1.0™ Technology™
- 3 Year Parts & Labor Warranty Plus an Additional
2 Year Compressor Warranty
- Exclusive 2 Year Warranty on Santoprene Door Gaskets
STANDARD FEATURES
Secure-Temp 1.0™ Technology
Full Electronic Control
Stainless Steel Exterior/Aluminum Interior
FEATURING:
Secure-Temp 1.0™ is the industry’s first and only full
service temperature monitoring solution for your kitchen.
Secure-Temp 1.0™ is standard on all Victory models and is
HACCP compliant & meets NAFEM’s data protocol.
There are NO software or monthly monitoring fees.
Optional add on kits are available for additional units.
Santoprene Door Gaskets with Exclusive 2 Year Warranty
10” Composite Cutting Board
Locking Divider Bars
Heavy Duty Pan Liner
Hinged, Insulated, Lift Up Lid
Self-Closing Doors with 120° Stay-Open Feature
(2) Epoxy Coated Shelves Per Door Section
OPTIONS & ACCESSORIES
ADA Compliant 3” Casters or 6” Legs
Single and Double Overshelves
VSP48-12
Garnish Racks
Door Locks
Bottle Dividers
Shelf Dividers
12” Cross Bars
Optional Voltages: 220/50/1, 220/60/1
Extra Shelves
3779 Champion Blvd—Winston-Salem, NC 27105
PH: (888) 845-9800 - Fax: (800) 253-5168
sales@victoryrefrigeration.com www.victoryrefrigeration.com
FEATURING:
CABINET CONSTRUCTION
Exterior construction includes heavy-duty stainless steel finish on front,
sides, top, door(s) and grille. Removable hoods and insulated lid assemblies are made of matching stainless steel. Cabinet back and bottom are
constructed of galvanized steel. Interior liner is made of aluminum for
superior resistance to corrosion.
Cabinet insulation is CFC free foamed-in-place polyurethane of two-inch
minimum thickness. Six-inch casters, 2 with brakes, are standard. Legs
are available as an option.
Composite cutting board supplied with cabinet is 10” wide. It is readily
removable for cleaning. Two epoxy-coated steel wire shelves per section
are supplied as standard. Pans furnished are 6” deep and made of
stainless steel.
DOOR CONSTRUCTION
Doors are mounted to face of cabinet on cartridge style hinges permitting
them to self-close under their own weight. Hinges also allow doors to
stay open 120° and permit easy door removal for service and cleaning if
required. A plug in type vinyl magnetic gasket is attached to each door
for positive seal. Door handle contoured to permit easy opening of doors
with fingers from both top and bottom of handle.
REFRIGERATION SYSTEM
More robust refrigeration system provides added capacity and efficiency.
Systems are designed using CFC free R134a refrigerant and expansion
valve between condenser and evaporator. Recirculated, forced air from
evaporator is moved under pans, which are recessed 2” from top of cabinet. Forced air over the condenser is drawn through grille under door as
well as the back and bottom of cabinet. Automatic condensate evaporator is provided to eliminate the need of floor drains.
CHARACTERISTICS VSP48-12
Net Capacity 13.9
Width, Overall (in.) 48”
Depth, Overall (inc. Handles) 29 1/4”
Depth, Door(s) Open 90° 52 1/8”
Height, Overall (in.) 37”
No. of 1/6 Size Pans 12
No. of Shelves 4
No. of Doors 2
ELECTRICAL DATA
Cabinet Voltage 115/60/1
NEMA Plug 5-15P
Total Amperes 5.0
NOTE: Plug st yl e, vo lt age an d f ul l l oad amp s m ay vary depending on
certain options selected such as optional voltages and compressor upgrades.
REFRIGERATION DATA
Condensing Unit Size 1/4 HP
Refrigerant R-134A
CRATED DIMENSIONS LBS
Two Section 314
Remote units use R-404A refrigerant standard and come with 6” legs
Note: In order to p ro vi de p eak o per ati ng per fo rmanc e th e cabinet
must have a 2 inch all around clearance and 12 inches above the top of
the condensing unit. This endures an adequate air supply and space
for routine maintenance and/or service if required.
We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements
for previously purchased equipment. Dimensional tolerances +/ - 1⁄4”. Metric dimensions (MM)
01/17
Loading...