PIZZA PREP TABLE
FEATURING:
VPP119
Secure-Temp 1.0™ is the industry’s first and only full
service temperature monitoring solution for your kitchen.
- Equipped with Secure-Temp 1.0™ Technology™
- 3 Year Parts & Labor Warranty Plus an Additional
2 Year Compressor Warranty
- Exclusive 2 Year Warranty on Santoprene Door Gaskets
Secure-Temp 1.0™ is standard on all Victory models and is
HACCP compliant & meets NAFEM’s data protocol.
There are NO software or monthly monitoring fees.
Optional add on kits are available for additional units.
STANDARD FEATURES
Secure-Temp 1.0™ Technology
Full Electronic Control
Stainless Steel Exterior / Aluminum Interior
Stainless Steel Top
(2) Heavy Duty Epoxy Coated Wire Shelves Per Section
Accommodates up to 6” Deep Pans - 4” Deep Pans Included
Locking Divider Bars
Heavy Duty Pan Liner
19” Composite Cutting Board
Santoprene Door Gaskets with Exclusive 2 Year Warranty
3” Casters Standard
Hinged, Insulated, Flat Lift Up Lids
Maintains Temperatures of 36°F - 38°F
VPP119
OPTIONS & ACCESSORIES
Remote Models
Correctional Packages
Exterior Door Laminate
Single or Double Overshelves
6” Casters or 6” Legs
Extra Shelves
Door Locks
Bun Tray Racks
Garnish Racks
Gasket Guard
Optional Voltages: 220/50/1, 220/60/1
3779 Champion Blvd—Winston-Salem, NC 27105
PH: (888) 845-9800 - Fax: (800) 253-5168
sales@victoryrefrigeration.com www.victoryrefrigeration.com
FEATURING:
CABINET CONSTRUCTION
Exterior is constructed from stainless steel. Interior liner is made of
aluminum for superior resistance to corrosion.
Cabinet insulation is CFC free foamed-in-place polyurethane of twoinch minimum thickness. Three-inch casters, 2 with brakes, are standard. Six-inch casters or legs are optional.
Composite cutting board supplied with cabinet is 19” wide. It is readily
removable for cleaning. Two epoxy-coated steel wire shelves are supplied behind each door as standard. Units will accept pans up to 6”
deep. Pans are not included.
DOOR CONSTRUCTION
Doors are mounted to face of cabinet with lift-off hinges permitting
them to self close under their own weight. Hinges also allow doors to
stay open 120° and permit easy door removal for service and cleaning
if required. A plug in type vinyl magnetic gasket is attached to each
door for positive seal. Door handle is contoured to permit easy opening
of doors with fingers from both top and bottom of handle.
REFRIGERATION SYSTEM
Systems are designed using CFC free R134a refrigerant and cap tube
between condenser and evaporator. Recirculated, forced air from
evaporator is discharged 3 ways. Slightly over and mostly under pans
which are recessed approximately 3” from top of raised rail, and into
the cabinet directly. Coils are plastic coated for maximum corrosion
protection. Automatic condensate evaporator is provided to eliminate
the need of floor drains.
CHARACTERISTICS VPP119
Net Capacity 52.5
Width, Overall (in.) 119”
Depth, Overall (inc. Handles) 38 83/8”
Height, Overall (in.) 43 3/8”
No. of Door(s) 4
ELECTRICAL DATA
Cabinet Voltage 115/60/1
NEMA Plug 5-15P
Total Amperes 8.6
NOTE: Plug style, v ol tage and fu ll lo ad am ps may var y depen di ng
on certain options selected such as optional voltages and compressor
upgrades.
REFRIGERATION DATA
Condensing Unit Size 1/2 HP
Refrigerant R-134A
CRATED DIMENSIONS LBS
Two Section 717
Remote units use R-404A refrigerant standard and come with 6” legs
Note: In order to p ro vi de p eak o per ati ng per fo rmanc e th e cabi-
net must have a 2 inch all around clearance and 12 inches above
the top of the condensing unit. This endures an adequate air supply
and space for routine maintenance and/or service if required.
We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements
for previously purchased equipment. Dimensional tolerances +/ - 1⁄4”. Metric dimensions (MM)
01/17