Victory-Raetone VBC -175 User Manual

Blast Chill/Storage Refrigerator
Remote Roll-In Blast Chiller
Large foodservice operations benefit from a chilling capacity of 175, 220, and 350 lbs of food product to +38°F in about 90 minutes.
Refrigeration System
Cabinets require a single remote condensing unit or the equivalent to support operation. A remote indoor/outdoor condensing unit is available from the factory or third party suppliers. Consult price list for selections.
The self-contained top mounted refrigeration system allows for use as a +38°F storage refrigerator. Expansion and solenoid valves are standard. An external drain line run is required to remove condensate water.
Controls
Unique E-Z Blast™ 1-2-3 microprocessor control panel initiates blast cycles in three simple steps. Model features built-in alarms and can control the chilling process with the temperature probes or a digital timer, which can be programmed with two preset chilling times for specific food products.
HACCP Data Logger System records, stores and prints temperature data for up to 7 days in accordance with HACCP guidelines. Its built-in thermal printer provides simplified
documentation and HACCP record keeping.
May be used with optional NAFEM Data Protocol compliant documentation software for HACCP monitoring to transfer data from kitchen to a remote Windows® compatible computer system. Program is available from the factory and many third-party suppliers.
Cabinet
Exterior is heavy gauge stainless steel front, back, sides and door. Galvanized steel top. Interior is heavy gauge stainless steel with radius corners. 3
1
/2”of environmentally friendly ODP Zero Polyurethane foam injected insulation throughout the cabinet ensures the ultimate in energy efficiency.
Doors
Door is hinged right and cannot be site reversed. Standard with flush recessed handle, hydraulic closer, magnetic gasket, heater and self-closing hinges with a 90° “stay open” feature.
Construction
Roll-in Blast Chillers are made from walk-in type cam-lock panels and are delivered knocked down for ease of installation. Panel assembly is required on site.
Standard Features
• Two Operational Functions:
- Blast Chill Processing Refrigerator
- +38°F Storage Refrigerator
• E-Z Blast™ Microprocessor Control Panel:
- Blast Chill Cycle Controlled Automatically by Either a Food Probe or Digital Timer
•Two (2) Preset Chill Times: 90, 240 Minutes
•Soft Chill and Hard Chill Options
•Three (3) Food Probes with Digital Temperature Indication
- Cabinet Temperature Digital Display
- Food Temperature Digital Display
- Defrost Mode Indicator
- On/Off, Blast Chill Cycle and Cancel Buttons
- Diagnostic Trouble Shooting Capability
• High and Low Temperature Alarm
• Power and Component Failure Alarms
• HACCP Data Logger System Records, Stores and Prints Temperature Data up to 7 Days
- After Termination of Chill Mode
- After Cancellation of Chill Mode
- Daily at Midnight
- Seven (7) Day History on Demand
- Built-In Thermal Printer
• Compartment Accepts One (1) Roll-in Cart 27” Wide x 40” Deep x 72” High
• Complies with FDA, NSF 7 and HACCP Guidelines
• Defrost on Demand or Automatic Defrost
• Environmentally Friendly R-134a Refrigerant
• 3”of Environmentally Friendly ODP Zero Polyurethane Foam Injected Insulation
Optional Features and Accessories
• Reverse Door Swing (factory install only)
• Roll-thru (specify door swing)
• Indoor/Outdoor Remote Condensing Units
• Insulated Floors (Adds 3
1
/2” to Height)
• Stainless Steel Floor Ramps
• Stainless Steel Roll-In Rack (Single Section)
• HACCP Monitoring
• Rapid Freeze Option Available (Consult Factory)
Note: Extra Wide Doors for Combi Oven Racks are available. Outside Dimensions
become
65.8” W x 49.3” D x 98.2” H. Clear Door
Opening becomes 35.43” W x 73.8” H
VBC MODELS —
Stainless Steel Exterior and Interior
VBC-175 VBC-220 VBC-350
Victory Refrigeration, Inc. I 110 Woodcrest Road I Cherry Hill, NJ 08003 USA I Phone: 856.428.4200 I Fax: 856.428.7299 I E-mail: sales@victory-refrig.com
Victory Refrigeration specification sheets
are available online at
www.victoryrefrigeration.com.
Approvals:
Project:
Location:
Item #:
Quantity:
Roll-In Rack
Stainless steel removable rack guides protect wall panels from damage. Optional racks are available from the factory. Maximum rack size is 27” wide x 40” deep x 72” high exterior dimensions including casters.
Model shown with optional insulated floor and ramp.
VBC-175
Victory participates in the KCL CADalog, the most current source of CAD symbols for foodservice designers worldwide. Symbols include standard equipment in plan, side, front and 3-D views, layered for FEDA/FCSI recommended guidelines.
Continuous product development may necessitate specification changes and design without notice.
Victory Refrigeration, Inc. Remote Roll-In Blast Chiller
CHARACTERISTICS VBC-175 VBC-220 VBC-350
Capacity (lbs./90 mins.) 175 lbs 220 lbs 350 lbs Width, Overall 57.95” 57.95” 57.95” Depth, Overall 49.3” 49.3” 49.3” Depth, Door Open 90º 76.85” 76.85” 76.85” Height without Floor 98.2” 98.2” 98.2” Height with Floor 101.7” 101.7” 101.7” Clear Door Width 27.5” 27.5” 27.5” Clear Door Height 73.8” 73.8” 73.8” No. of Carts (Optional) 1 1 1 Cabinet Voltage 208-230/60/3 208-230/60/3 208-230/60/3 Feed Wires (with Ground) 3 3 3 Total Amperes 16 16 16
Note: The self-contained refrigeration system is top mounted for the storage cycle. This avoids shor t cycling of the stand alone condensing unit when in the +38°F storage mode. All roll-in models require remote refrigeration.
STORAGE REFRIGERATION DATA
Refrigerant Compressor BTUH* VBC-175 R-134a 1/3 H.P. 2207 VBC-220 R-134a 1/3 H.P. 2207 VBC-350 R-134a 1/3 H.P. 2207
*BTUH @ 100°F. Ambient, +25°F. Evaporator
REMOTE BLAST CHILL REFRIGERATION DATA
Refrigerant Liquid Line Suction Line BTUH*
Size Size
VBC-175 R-404A .5 1.125 22,350 VBC-220 R-404A .5 1.125
29,330
VBC-350 R-404A .5 1.125
44,000
*BTUH @ 90°F. Ambient, +5°F. Evaporator
NOTE: If cabinet is located directly against wall an all around clearance of 2” is required, and a minimum clearance of 10” under ceiling.
Insulated floor adds 3.5” in height.
We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
Dimensional tolerance ± .25”Metric dimensions (mm)
Copyright June 2009
Printed in U.S.A. 063009
CRATED DIMENSIONS AND WEIGHTS
Height Width Depth Weight
VBC-175 72” 90.5” 59” 1158 lbs VBC-220 72” 90.5” 59” 1158 lbs VBC-350 72” 90.5” 59” 1158 lbs
†Add 88lbs per roll-in rack ordered.
Loading...