Victory-Raetone HS-1D-1-EW User Manual

EXTRA WIDE REACH-IN

WARMING CABINETS

Full Door Half Door

HS-1D-1-EW HS-1D-1-EW-HD
HS-2D-1-EW HS-2D-1-EW-HD
HSA-1D-1-EW HSA-1D-1-EW-HD
HSA-2D-1-EW HSA-2D-1-EW-HD

- Equipped with Secure-Temp 1.0™ Technology™

- 3 Year Parts & Labor Warranty Plus an Additional
2 Year Compressor Warranty

- Exclusive 2 Year Warranty on Santoprene Door Gaskets

STANDARD FEATURES

 Secure-Temp 1.0™ Technology

 Full Electronic Control System

 Adjustable Electronic Temp Control from 80

 Built-in, Adjustable Humidity Control Vent

 Safety Shielded Strip Type Heating Elements

 Externally Mounted Blower Maintains Even Temperatures

°

F to 180°F

FEATURING:

Secure-Temp 1.0™ is the industry’s first and only full

service temperature monitoring solution for your kitchen.

Secure-Temp 1.0™ is standard on all Victory models and is

HACCP compliant & meets NAFEM’s data protocol.

There are NO software or monthly monitoring fees.

Optional add on kits are available for additional units.

 Foamed-in-Place Polyurethane Insulation

 Heavy Duty Cylinder Locks

 Santoprene Door Gaskets with Exclusive 2 Year Warranty

 Self-Closing Doors with 120

°

Hold Open Feature

 Cam-Lift Hinges, Guaranteed for Life

 Ergonomically Correct Door Handles, Guaranteed for Life

 6” High, Adjustable Stainless Steel Legs

 A Series has 6” High Standard Black Legs

 Proximity Door Switch Activates Interior Incandescent Lighting

 One Piece, Snap-In Magnetic Door Gasket(s)

 Stainless Steel Interior Door Liner

 Three (3) Chrome Plated Wire Shelves per Cabinet Section

OPTIONS & ACCESSORIES

 6” or 3” Overall Height Casters (Set of 4)
 Correctional Facilities Options
 Stainless Steel Shelves
 6” Stainless Steel Kick Plate

HS-2D-1-EW-HD

 Exterior Laminate Décor
 Finished Back with Rear Grille
 Stainless Steel Case Back and Shroud
 Optional Voltages (single section only)

3779 Champion Blvd—Winston-Salem, NC 27105

PH: [phone] - Fax: [phone]

[e-mail] www.victoryrefrigeration.com

FEATURING:

CABINET CONSTRUCTION

The cabinet front and doors are constructed of heavy gauge, polished stainless
steel to maintain an attractive appearance after years of heavy use. Polyure­thane foam insulation throughout ensures the ultimate in energy efficiency.

DOOR CONSTRUCTION

The doors are heavy gauge, polished stainless steel with a stainless steel interi­or liner. Each door is provided with a cylinder lock and ergonomically correct
vertical handle. The door hinges are self-closing and have a hold-open feature
at 120° which facilitates product loading. Proximity switches energize the re­cessed interior incandescent lighting when the door is opened.

HEATING SYSTEM

The safety shielded, “strip type” heaters located at the bottom of the cabinet
interior are precisely controlled by the V-TEMP™ electronic control with a tem­perature range from 80°F to 180°F. An externally mounted blower system en­sures even temperatures throughout the cabinet interior. A built-in, adjustable
humidity control vent allows the operator to maintain a moist or more dry envi­ronment.

INTERIOR STORAGE ARRANGEMENTS

Each cabinet section is provided with three (3) heavy-duty, chrome plated wire
shelves. The shelves are adjustable in one inch increments. A wide door open­ing allows for the use of a variety of optional pan slide configurations including
18” x 26” and 12” x 20” pans.

ELECTRONIC CONTROL SYSTEM

The easy to use V-TEMP™ Control is provided standard with a two year parts
and labor warranty. This durable, water resistant microprocessor monitors and
controls the entire temperature maintenance process. It includes an ON/OFF
switch located on the control face, interior light switch, LED temperature indica­tor in °C or° F, a HI/LO audio/visual temperature alarm , and a door ajar alarm.
The control has a set point memory. Upon start up, the unit will warm up to the
last temperature set point. A manager’s “lock-out” feature is provided to safe­guard pre-determined control settings.

CHARACTERISTICS 1 SECTION 2 SECTION

Width, Overall (in.) 31 1/4” 58 3/8”

Depth, Overall (inc. Handles) 35” 35”

Depth, Door(s) Open 90° 58 1/8” 58 1/8”

Height Overall (in.) 84 1/4” 84 1/4”

Capacity Net (cu ft) 24.4 52

No. Full Doors 1F, 2H 2F, 4H

No. of Shelves 3 6

ELECTRICAL DATA

Cabinet Voltage 208-240/60/1 208-240/60/1

Heater Watts per Section (@240V) 1500 1500

Total Wattage (Heaters & Fan @ 240V) 1500 3000

Feed Wires 2 2

NEMA Plug 6-20P 6-20P

Total Amperes 6.3 13

NOTE: Plug style, vol tag e and full load amps may vary depend in g o n c ertain
options selected such as optional voltages and compressor upgrades.

CRATED DIMENSIONS HEIGHT WIDTH DEPTH FT3 LBS

ONE SECTION 83 36 44 76.08 340

TWO SECTION 83 63 44 133.46 590

We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements
for previously purchased equipment. Dimensional tolerances +/ - 1⁄4”. Metric dimensions (MM)

01/17