![](/html/38/38de/38de5236f123c45d0651e6fafa8a24826b94a37a5e7c1929b3ee483c7948ee73/bg1.png)
EXTRA WIDE REACH-IN
DUAL TEMPERATURE
REFRIGERATOR/WARMER
FEATURING:
Full Door
HRS-2D-S1-EW-PT
HRSA-2D-S1-EW-PT
- Equipped with Secure-Temp 1.0™ Technology™
- 3 Year Parts & Labor Warranty Plus an Additional
2 Year Compressor Warranty
- Exclusive 2 Year Warranty on Santoprene Door Gaskets
Half Door
HRS-1D-S1-EW-PT-HD
HRS-2D-S1-EW-PT-HD
HRSA-1D-S1-EW-PT-HD
HRSA-2D-S1-EW-PT-HD
Secure-Temp 1.0™ is the industry’s first and only full
service temperature monitoring solution for your kitchen.
Secure-Temp 1.0™ is standard on all Victory models and is
HACCP compliant & meets NAFEM’s data protocol.
There are NO software or monthly monitoring fees.
Optional add on kits are available for additional units.
STANDARD FEATURES
Secure-Temp 1.0™ Technology
V-TEMP™ Electronic Control System
LED Lighting with Proximity Door Switch, Activates Interior Lighting
Expansion Valve Technology
20 Gauge, Stainless Steel Doors
Dual Speed, Energy Efficient, EC Fan Motors
Santoprene Door Gaskets with Exclusive 2 Year Warranty
Stainless Steel Breakers
High Performance, Balanced, Top-Mounted Refrigeration
Plasticized Evaporator Fin Coils
Non-Electric Condensate Evaporator
Foamed-in-Place Polyurethane Insulation
Insulated Partition Wall Separates Compartments
Heavy Duty Cylinder Locks
Self-Closing Doors with 120
Cam-Lift Hinges, Guaranteed for Life
Ergonomically Correct Door Handles, Guaranteed for Life
S, SA Series have 6” High, Adjustable Stainless Steel Legs
Hinged Front Shroud Makes Condenser Cleaning Easier
One Piece, Snap-In Magnetic Door Gasket(s)
Anti-Condensate Door Perimeter Heaters
Stainless Steel Interior Door Liner
Energy Saving Thermal Breaker Caps, Guaranteed for Life
Two (2) Epoxy Coated Wire Shelves per 1/2 Section
Three (3) Epoxy Coated Wire Shelves per Cabinet Section (2-section models)
One (1) Epoxy Wire Shelf per Cabinet Section (1-Section Models)
Cord and Plug (see electrical data for details)
°
Hold Open Feature
HRS-1D-S1-EW-PT-HD
OPTIONS & ACCESSORIES
Correctional Facilities Options
Stainless Steel Shelves
Stainless Steel Case Back and Shroud
6” Overall Height Casters (set of 4)
Exterior Laminate Décor
Adjustable Tray and Pan Slides
Optional Voltages
3779 Champion Blvd—Winston-Salem, NC 27105
PH: (888) 845-9800 - Fax: (800) 253-5168
sales@victoryrefrigeration.com www.victoryrefrigeration.com
![](/html/38/38de/38de5236f123c45d0651e6fafa8a24826b94a37a5e7c1929b3ee483c7948ee73/bg2.png)
FEATURING:
CABINET CONSTRUCTION
The cabinet front and doors are constructed of heavy gauge, polished stainless
steel to maintain an attractive appearance after years of heavy use. Polyurethane
foam insulation throughout ensures the ultimate in energy efficiency. The front
shroud lifts up for easy access when cleaning the condenser unit.
DOOR CONSTRUCTION
The doors are heavy gauge, polished stainless steel with a stainless steel interior liner.
Each door is provided with a cylinder lock and ergonomically correct vertical handle. The
door hinges are self-closing and have a hold-open feature at 120° which facilitates product
loading. Proximity switches energize the recessed interior incandescent lighting (top cabinet only for single section models) when the door is opened. Humidity control wires around
the door jamb prevent condensation from forming on the front of the cabinet in high humidity environments. The wires are concealed by a high impact, non-conducting thermal breaker cap (warmer has stainless steel breakers).
REFRIGERATION SYSTEM
All components of the high efficiency, air-cooled, self-contained refrigeration system are
mounted on top of the cabinet out of the food storage zone providing greater usable storage space. Environmentally friendly R-134a refrigerant is efficiently metered by a capillary
system providing a constant, safe operating temperature and quick “recovery” under the
most demanding conditions. The hermetically sealed system is designed to
operate at 38°F. The cooling coil has plasticized fin coils to resist food acids and dualspeed EC fan motor(s) for greater cooling capacity and efficiency. All condensate water is
disposed of automatically by the condensate vaporizer on the single section and disposed
of automatically with the non-electric hot gas disposal system on the two section model.
HEATING SYSTEM
The safety shielded, “strip type” heaters located at the bottom of the cabinet interior
are precisely controlled by the V-TEMP™ electronic control with a temperature range
from 80°F to 180°F. An externally mounted blower system ensures even temperatures
throughout the cabinet interior. A built-in, adjustable humidity control vent allows
the operator to maintain a moist or more dry environment.
INTERIOR STORAGE ARRANGEMENTS
Shelves are adjustable in one inch increments. A wide door opening allows for the use
of a variety of optional pan slide configurations including 18” x 26” and 12” x 20” pans.
TM
V-TEMP
Dual temp models have two (2) easy to use V-TEMP™ Controls provided standard.
This durable, water resistant microprocessor monitors and controls the entire
temperature maintenance process. The refrigerator control includes an ON/OFF switch,
manual defrost, interior light switch, LED temperature indicator in °C or° F, a HI/LO audio/
visual temperature alarm, power supply interruption, door ajar and “clean condenser”
alarms. The warmer control includes an ON/OFF switch located on the control face,
interior light switch, LED temperature indicator in °C or° F, a HI/LO audio/visual temperature alarm , and a door ajar alarm. The control has a set point memory. Upon start up, the
unit will warm up to the last temperature set point. For both controls a manager’s “lock-out”
feature is provided to safeguard pre-determined settings. A HAACP Event Indicator/
Memory feature announces and records up to nine (9) alarm events. Unique to the VTEMP™ Control are two standard modes of operation.
SUPERCOOL - Provides a lower “set-point” refrigeration condition for a set period of time
when food has just been loaded into the refrigerator and needs to be quickly brought back
down to a safe temperature.
ENERGY SAVER - The cabinet automatically reverts to the energy saving mode when
there are no door openings for four hours.
A FLEXTEMP mode of operation is available as an option. FLEXTEMP provides
the ability to select a unique temperature from 28°F to 40°F. This optional feature is ideal
for seasonal menu changes and items with specific temperature
requirements for dairy, meat, fish or poultry.
CONTROL SYSTEM
CHARACTERISTICS 2 Section 1 Section
Net Capacity Ref. 25.6 11.0
Net Capacity Warmer 11.0 25.6
Width, Overall (in.) 58 3/8” 31 /14”
Depth, Overall (inc. Handles) 39 1/4” 39 1/4”
Depth, Door(s) Open 90° 85 3/8” 85 3/8”
Clear Door Width (in.) 22 1/2” 22 1/2”
Clear Half-Door Height (in.) 25 3/8” 25 3/8”
Clear Full-Door Height (in.) 55 1/4” N/A
Height Overall (inc. 6” legs) 84 1/4” 84 1/4”
No. Full/Half Doors 4F/8H 4H
No. of Shelves 6 2
Shelf Area (Sq. Ft.) 11.7 36.1
ELECTRICAL DATA
Cabinet Voltage 208-240/60/1 208-240/60/1
Heater Watts per Section (@240V) 1,000 1,500
Condensing Unit Voltage, Refrigerator 115/60/1 115/60/1
NEMA Plug, Refrigerator 14-20P 14-20P
Total Amperes, Refrigerator 13.6 15.7
NOTE: Plug style, vol tag e and full load amps may vary depend in g o n c ertain
options selected such as optional voltages and compressor upgrades.
REFRIGERATION DATA
Condensing Unit Size, Refrigerator 1/3 HP 1/3 HP
Refrigerant , Refrigerator R-134A R-134A
CRATED DIMENSIONS Height Width Depth Cu. Ft. Lbs.
One Section 83 36 44 76.08 480
Two Section 83 63 44 133.15 690
Note: In order to pro vide peak operating per fo rmanc e th e cabinet must
have a 2 inch all around clearance and 12 inches above the top of the condensing unit. This endures an adequate air supply and space for routine maintenance and/or service if required.
* Remote units use R-404A refrigerant standard and come with 6” legs
We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for
previously purchased equipment. Dimensional tolerances +/- 1⁄4”. Metric dimensions (MM)
01/17