Victory-Raetone HIS-1D-1 User Manual

WARMING CABINET

ROLL-IN

Full Door

HIS-1D-1 HISA-1D-1
HIS-2D-1 HISA-2D-1

Secure-Temp 1.0™ is the industry’s first and only full

service temperature monitoring solution for your kitchen.

Secure-Temp 1.0™ is standard on all Victory models and is

- Equipped with Secure-Temp 1.0™ Technology™

- 3 Year Parts & Labor Warranty Plus an Additional
2 Year Compressor Warranty

- Exclusive 2 Year Warranty on Santoprene Door Gaskets

HACCP compliant & meets NAFEM’s data protocol.

There are NO software or monthly monitoring fees.

Optional add on kits are available for additional units.

STANDARD FEATURES

 Secure-Temp 1.0™ Technology
 V-TEMP
 Adjustable Electronic Temp Control from 80

 Built-in, Adjustable Humidity Control Vent
 Safety Shielded Strip Type Heating Elements
 Externally Mounted Blower Maintains Even Temperatures

TM

Electronic Control System

°

F to 180°F

FEATURING:

 Stainless Steel Doorjamb(s)
 Foamed-in-Place Polyurethane Insulation
 Heavy Duty Cylinder Locks

 Self-Closing Doors with 120

°

Hold Open Feature

 Cam-Lift Hinges, Guaranteed for Life
 Ergonomically Correct Door Handles, Guaranteed for Life
 Adjustable Door Wiper Gasket(s)
 Stainless Steel Floor
 Proximity Door Switch Activates Interior Lighting
 One Piece, Snap-In Magnetic Door Gasket(s)
 Stainless Steel Interior Door Liner
 Removable Ramp(s)
 Accepts Mobile Storage Racks up to 27” W x 29” D x 64.5” H

OPTIONS & ACCESSORIES

 Stainless Steel Case Back & Shroud
 Correctional Facilities Options
 Exterior Laminate Décor

 Optional Voltages (single section only)
 Cord and Plug

HIS-2D-1

3779 Champion Blvd—Winston-Salem, NC 27105

PH: [phone] - Fax: [phone]

[e-mail] www.victoryrefrigeration.com

FEATURING:

CABINET CONSTRUCTION

The cabinet front and doors are constructed of heavy gauge, polished stainless
steel to maintain an attractive appearance after years of heavy use. Polyurethane
foam insulation throughout ensures the ultimate in energy efficiency.

DOOR CONSTRUCTION

The doors are heavy gauge, polished stainless steel with a stainless steel interior
liner. Each door is provided with a cylinder lock and ergonomically correct vertical
handle. The door hinges are self-closing and have a hold open feature at 120°
which facilitates product loading. Proximity switches energize the recessed interior
incandescent lighting when the door is opened.

HEATING SYSTEM

The safety shielded, “strip type” heaters located at the bottom of the cabinet interi­or are precisely controlled by the V-TEMP™ electronic control with a temperature
range from 80°F to 180°F. An externally mounted blower system ensures even
temperatures throughout the cabinet interior. A built-in, adjustable humidity control
vent allows the operator to maintain a moist or drier environment.

INTERIOR STORAGE ARRANGEMENTS

Each door opening accepts a mobile storage rack measuring up to:

27” W x 29” D x 64.5” H.

Optional shelf pilasters and wire shelves are available.

V-TEMP™ CONTROL SYSTEM

The easy to use V-TEMP™ Control is provided standard with a two year parts and
labor warranty. This durable, water resistant microprocessor monitors and con­trols the entire temperature maintenance process. It includes and ON/OFF switch
located on the control face, interior light switch, LED temperature indicator in °C
or °F, a HI/LO audio/visual temperature alarm, and a door ajar alarm. The control
has set point memory. Upon start up, the unit will warm up to the last temperature
set point. A manager’s “lock-out” feature is provided to safeguard pre-determined
control settings.

CHARACTERISTICS 1 SECTION 2 SECTION

Width, Overall (in.) 36 1/2” 68 7/8”

Depth, Overall (inc. Handles) 36 1/2” 36 1/2”

Depth, Door(s) Open 90° 35 1/2” 35 1/2”

Height Overall (in.) 84 1/4” 84 1/4”

Capacity Net (cu ft) 33.6 67.2

Clear Full Door Height 65 1/4” 65 1/4”

No. Full Doors 1F 2F

ELECTRICAL DATA

Cabinet Voltage 208-240/60/1 208-240/60/1

Heater Watts Per Section 1500 1500

Total Wattage (heaters & fan @ 240) 1500 3000

Feed Wires 2 2

NEMA Plug 6-20P 6-20P

Total Amperes 6.3 13

NOTE: Plug style, vol tag e and full load amps may vary depend in g o n c ertain
options selected such as optional voltages and compressor upgrades.

CRATED DIMENSIONS HT. WIDTH DEPTH FT3 LBS

One Section 84 1/2” 42 43 92.23 325

Two Section 84 1/2” 77 43 179.15 540

We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements
for previously purchased equipment. Dimensional tolerances +/ - 1⁄4”. Metric dimensions (MM)

01/17