Victory-Raetone FIA-1D-S7-XH User Manual
Extra-High Roll-in Freezers
Cabinet:
Each Victory cabinet is internally supported,
braced and assembled into a single rigid
unit. The cabinet front and doors are
constructed of heavy gauge polished
stainless steel to maintain an attractive
appearance after years of heavy use.
Foamed-in-place polyurethane insulation
throughout the cabinet and doors ensures
the ultimate in energy efficiency.
Doors:
The self-closing doors are securely mounted
on rugged cam-lift hinges, which have a
lifetime guarantee. Each door has a heavyduty cylinder lock and self-adjusting
magnetic gasket to prevent the cold air from
escaping. Humidity control wires located
around the door jamb prevent condensation
from forming on the cabinet front and are
concealed by a high impact, non-conductive
thermal breaker strip. The interior door liner
is constructed of durable ABS material,
which resists denting and scratching and is
easy to clean. Each safety grip handle is
guaranteed for life. Removable ramps are
provided on the bottom of each door
opening.
Refrigeration System:
All components of the self-contained
refrigeration system are mounted on top of
the cabinet. The air circulating fans and the
forced convection-cooling coil are contained
in an insulated housing separate from the
product zone allowing for maximum food
storage capacity. All condensate water is
disposed of automatically by the energy
efficient non-electric condensate evaporator,
no plumbing is required.
FIS and FISA Models
• Digital Thermometer/Battery Back-up
FIA Models
• Dial Thermometer
Standard Features (all models)
• Energy Saver Switch
• Stainless Steel Case Front and Door(s)
• Lifetime Heavy-Duty Cam Lift Hinges
• Lifetime Safety Grip Handle(s)
• Self-Closing Doors with Safety Stops
• Adjustable Wiper Gasket(s)
• Removable Ramps(s)
• Energy Saving Thermal Breaker Strips
• Door Opening Accepts Carts up to 27”w x
29”d x 71”h
• Heavy-Duty Cylinder Locks
• One Piece Self-Adjusting Magnetic Door
Gaskets
• High Impact ABS Interior Door Liner
• Plasticized Fin Coil
• Environmentally Friendly R-404A Refrigerant
• Non-Electric Condensate Evaporator
• Automatic Defrost
• Stainless Steel Floor
• Cord and Plug Attached on 115V Models 12
Amps or Less
Optional Features and Accessories
• Dial or Digital Thermometer
• Change Door Swing
• Shelf Pilaster Strips
• Adjustable Stainless Steel Wire Shelves
• Stainless Steel Angle Pan Slides
• Zinc Plated Wire Pan Slides
• Stainless Steel Case Back
• Remote and Roll-Thru Models
FIS MODELS —
Stainless steel
exterior and
interior.
FIS-1D-S7-XH
FIS-2D-S7-XH
FISA-1D-S7-XH
FISA-2D-S7-XH
FIA-1D-S7-XH
FIA-2D-S7-XH
FISA MODELS —
Stainless steel
exterior.
Aluminum interior.
FIA MODELS —
Stainless steel fronts
and doors. Aluminum
sides and interior.
FISA-2D-S7-XH
Roll-Thru and Remote Models Available
Victory Refrigeration, Inc. I 110 Woodcrest Road I Cherry Hill, NJ 08003 USA I Phone: 856.428.4200 I Fax: 856.428.7299 I E-mail: sales@victory-refrig.com
Victory Refrigeration specification sheets
are available online at www.victory-refrig.com.
Approvals:
Project:
Location:
Item #:
Quantity:
Victory participates in the KCL CADalog, the most current source of CAD symbols for foodservice designers worldwide. Symbols include
standard equipment in plan, side, front and 3-D views, layered for FEDA/FCSI recommended guidelines.
Continuous product development may necessitate specification changes and design without notice.
Victory Refrigeration, Inc. Extra-High Roll-in Freezers
Crated dim. & wts.
Ht. Width Depth Cu.Ft. Lbs
One Section 921/2413/4443/494.1 720
Two Section 92
1
/2745/8443/4168.1 1090
Approximate Roll-Thru weights, add 15%
FOR REMOTE MODELS– Substitute an “R” for the “S” in suffix. For
example: Model FIS-1D-S7 (self-contained) would be FIS-1D-R7
remote cabinet. Air circulating fans, expansion valve and plasticized
coil are provided. Condensing units not supplied. The following units
are recommended with
1
/
2
” O.D. Suction line,
1
/
4
” O.D. Liquid line.
Dimensional tolerance ± 1/4” Metric dimensions (MM)
REMOTE REFRIGERATION
Cond. Unit BTUH Cabinet Amps*
One Section3/4H.P. 2540 115/60/1 4.9
Two Section
1
H.P. 4400 115/60/1 7.8
*(In Defrost) For Remote Roll-Thru–Consult factory
Copyright June 2009
Printed in U.S.A. 063009
CHARACTERISTICS ONE SECTION TWO SECTION
Roll-In Roll-Thru Roll-In Roll-Thru
Width, Overall 36
1
/
2
36
1
/
2
68
7
/
8
68
7
/
8
Depth, Overall (incl. handles) 35
7
/
8
39
3
/
8
35
7
/
8
39
3
/
8
Height, Overall 89
1
/
2
89
1
/
2
89
1
/
2
89
1
/
2
Depth, Door(s) Open 90º 65
1
/
4
65
1
/
4
65
1
/
4
65
1
/
4
Depth Cast Over Ramp 35
1
/
2
35
1
/
2
35
1
/
2
35
1
/
2
Clear Door Width 27
3
/
4
27
3
/
4
27
3
/
4
27
3
/
4
Clear Full Door Height 72
1
/
4
72
1
/
4
72
1
/
4
72
1
/
4
Capacity Net (cubic feet) 36.3 36.3 72.6 72.6
No. of Full Doors 1 2 2 4
Cabinet Voltage 115/60/1 115/60/1 115/60/1 115/60/1
Feed Wires 3 3 3 3
Condensing Unit Voltage
208-230/60/1 208-230/60/1 208-230/60/1 208-230/60/1
Condensing Unit Size (HP)
3
/
4
11 2
Total Amperes 10.9 13.1 13.9 18.2
NOTE: If cabinet is located
directly against wall an all
around clearance of 2” is
required, and a minimum
clearance of 10” under
ceiling.
We reserve the right to
change specifications and
product design without
notice. Such revisions do
not entitle the buyer to
corresponding changes,
improvements, additions or
replacements for previously
purchased equipment.
ROLL-THRU MODELS
39.38
(1000)
ROLL-IN MODELS
35.88
(911)
31.25
(793)
36.50
(927)
ELEC.
CONN.
ELEC.
CONN.
39.38
(1000)
35.88
(911)
63.62
(1616)
68.88
(1749)
ELEC. CONN.
ELEC. CONN.
34.88
(873)
14.12
(358)
89.50
72.25
(1835)
.88
(22)
27.75
(705)
89.50
(2273)
72.25
(1835)
.88
(22)
27.75
(705)
27.75
(705)
(2273)
32.38
(822)
35.50 (902)
TO RAMP
Loading...