Victory-Raetone CBR72-1 User Manual

CHEF BASE

REFRIGERATOR

CBR72-1

- Equipped with Secure-Temp 1.0™ Technology™

- 3 Year Parts & Labor Warranty Plus an Additional
2 Year Compressor Warranty

- Exclusive 2 Year Warranty on Santoprene Door Gaskets

Secure-Temp 1.0™ is the industry’s first and only full

service temperature monitoring solution for your kitchen.

Secure-Temp 1.0™ is standard on all Victory models and is

HACCP compliant & meets NAFEM’s data protocol.

There are NO software or monthly monitoring fees.

Optional add on kits are available for additional units.

STANDARD FEATURES

 Secure-Temp 1.0™ Technology

 Full Electronic Control

 Heavy Duty, Fire-Proof, Reinforced Insulated 16 Gauge Top

No heat shield required

 Expansion Valve Technology

 100% Front Breathing

 Marine Edge Standard

 Lifetime Warranty On All Drawers & Slides

 12 Gauge Drawer Slides With 3 Stainless Steel Ball

Bearings Per Each Drawer Slide

 Santoprene Door Gaskets with Exclusive 2 Year Warranty

 Stainless Steel Exterior & Aluminum Interior

 6” Casters, 2 with Brakes Standard

 Upper Drawers Accommodate two 6” deep 12” x 20” pans

Food service pans not included

 Lower Drawers Accommodate two 4” deep 12” x 20” pans

Food service pans not included

FEATURING:

CBR72-1

OPTIONS & ACCESSORIES

 Flat Top

 Gasket Guards

 3” Casters or 6” Seismic Legs

 Optional Voltages: 220/50/1, 220/60/1

[e-mail] www.victoryrefrigeration.com

3779 Champion Blvd—Winston-Salem, NC 27105

PH: [phone] - Fax: [phone]

FEATURING:

CABINET CONSTRUCTION

Heavy-duty construction with stainless steel on top, front, sides, rear
and drip guard top. Interior of cabinet is constructed of corrosion­resistant aluminum. Drawers are equipped with heavy-duty workflow
handle. Cabinet integrity is reinforced by use of structural columns.
Cabinets are insulated with foamed-in-place polyurethane insulation of
2” thickness for added strength and maximum energy efficiency.

DRAWER CONSTRUCTION

Drawer frames are constructed of heavy duty stainless steel and are
supported on stainless steel telescoping drawer slides with three stain­less steel roller bearing wheels for maximum support of stored food
product. Upper pull-out drawers accommodate two 6” deep 12” x 20”
pans of combinations of 1/6 size pans or larger. Lower pull-out draw­ers accommodate two 4” deep 12” x 20” pans or combinations of 1/6

size pans or larger. Heavy duty pan divider supports are supplied.

Foodservice pans are not included. A snap in type vinyl magnetic gas­ket is attached to each drawer for positive seal.

REFRIGERATION SYSTEM

Self-contained refrigeration system utilizes R134a refrigerant metered
by expansion valve. Automatic (hot gas) condensate evaporation is
provided. Interior forced air system, with high humidity evaporator
coils, provide the ideal environment for food preservation. Removable
front thermometer panel and grille allows for easy access to complete
lift-out refrigeration system.

CHARACTERISTICS CBR72-1

Net Capacity 17.5

Width, Overall (in.) 72”

Depth, Overall (inc. Handles) 32”

Depth, Drawer(s) 60”

Height, Overall (in.) 26 3/4”

No. of Drawers 4

Upper Drawer Pans (2) - 12” x 20” -x 6”

Lower Drawer Pans (2) - 12” x 20” x 4”

Top Load Rating (lbs.) 800

ELECTICAL DATA

Cabinet Voltage 115/60/1

NEMA Plug 5-15P

Total Amperes 4.5

NOTE: Plug style, v ol tage and fu ll lo ad am ps may var y depen di ng on
certain options selected such as optional voltages and compressor upgrades.

REFRIGERATION DATA

Condensing Unit Size 1/3 HP

Refrigerant R-134A

CRATED DIMENSIONS LBS.

Two Section 556

Remote units use R-404A refrigerant standard and come with 6” legs

Note: In order to p ro vi de p eak o per ati ng per fo rmanc e th e cabi-

net must have a 2 inch all around clearance and 12 inches above
the top of the condensing unit. This endures an adequate air supply
and space for routine maintenance and/or service if required.

We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements
for previously purchased equipment. Dimensional tolerances +/ - 1⁄4”. Metric dimensions (MM)

01/17