Victory-Raetone CBF60-1 User Manual

CHEF BASE FREEZER

FEATURING:

CBF60-1

Secure-Temp 1.0™ is the industry’s first and only full

service temperature monitoring solution for your kitchen.

Secure-Temp 1.0™ is standard on all Victory models and is

- Equipped with Secure-Temp 1.0™ Technology™

- 3 Year Parts & Labor Warranty Plus an Additional
2 Year Compressor Warranty

- Exclusive 2 Year Warranty on Santoprene Door Gaskets

HACCP compliant & meets NAFEM’s data protocol.

There are NO software or monthly monitoring fees.

Optional add on kits are available for additional units.

STANDARD FEATURES

 Secure-Temp 1.0™ Technology

 Full Electronic Control

 Heavy Duty, Fire-Proof, Reinforced Insulated 16 Gauge Top

No heat shield required

 Expansion Valve Technology

 100% Front Breathing

 Marine Edge Standard

 Lifetime Warranty On All Drawers & Slides

 12 Gauge Drawer Slides With 3 Stainless Steel Ball

Bearings Per Each Drawer Slide

 Santoprene Door Gaskets with Exclusive 2 Year Warranty

 Stainless Steel Exterior & Aluminum Interior

 6” Casters, 2 with Brakes Standard

 Upper Drawers Accommodate two 6” deep 12” x 20” pans

Food service pans not included

 Lower Drawers Accommodate two 4” deep 12” x 20” pans

Food service pans not included

 Freezers Maintain Temperatures of –10°F to 0°F

CBF60-1

OPTIONS & ACCESSORIES

 Flat Top

 Gasket Guards

 3” Casters or 6” Seismic Legs

 Optional Voltages: 220/50/1, 220/60/1

[e-mail] www.victoryrefrigeration.com

3779 Champion Blvd—Winston-Salem, NC 27105

PH: [phone] - Fax: [phone]

FEATURING:

CABINET CONSTRUCTION

Heavy-duty construction with stainless steel on top, front, sides,
rear and drip guard top. Interior of cabinet is constructed of corro­sion-resistant aluminum. Drawers are equipped with heavy-duty
workflow handle. Cabinet integrity is reinforced by use of structural
columns. Cabinets are insulated with foamed-in-place polyure­thane insulation of 2” thickness for added strength and maximum
energy efficiency.

DRAWER CONSTRUCTION

Drawer frames are constructed of heavy duty stainless steel and
are supported on stainless steel telescoping drawer slides with
three stainless steel roller bearing wheels for maximum support of
stored food product. Drawers hold 3 full size pans. Heavy duty
pan divider supports are supplied. Foodservice pans are not in-

cluded. A snap in type vinyl magnetic gasket is attached to each

drawer for positive seal.

REFRIGERATION SYSTEM

Self-contained refrigeration system utilizes R404a refrigerant me­tered by expansion valve. Automatic (hot gas) condensate evapo­ration is provided. Interior forced air system, with high humidity
evaporator coils, provide the ideal environment for food preserva­tion. Removable front thermometer panel and grille allows for easy
access to complete lift-out refrigeration system.

CHARACTERISTICS CBF60-1

Net Capacity 11.1

Width, Overall (in.) 60”

Depth, Overall (inc. Handles) 32”

Depth, Drawer(s) 57 1/2”

Height, Overall (in.) 26 3/4”

No. of Drawers 2

Top Load Rating (lbs.) 800

ELECTICAL DATA

Cabinet Voltage 115/60/1

NEMA Plug 5-15P

Total Amperes 10.6

NOTE: Plug style, v ol tage and fu ll lo ad am ps may var y depen di ng on

certain options selected such as optional voltages and compressor upgrades.

REFRIGERATION DATA

Condensing Unit Size 3/4 HP

Refrigerant R-404A

CRATED DIMENSIONS LBS.

Two Section 500

Remote units use R-404A refrigerant standard and come with 6” legs

Note: In order to p ro vi de p eak o per ati ng per fo rmanc e th e cabinet

must have a 2 inch all around clearance and 12 inches above the top of the
condensing unit. This endures an adequate air supply and space for
routine maintenance and/or service if required.

We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements
for previously purchased equipment. Dimensional tolerances +/ - 1⁄4”. Metric dimensions (MM)

12/16