Victory HS-2D-S1 Installation Manual

Reach-In, Pass-Thru, Roll-In and Roll-Thru Warmer Models

Installation, Operation and Troubleshooting Manual

Manual Part No. 50707413

Rev. 00

Print Date: 04/18/12

110 Woodcrest Road, Cherry Hill, NJ 08003

Phone: [phone] Fax: [phone] Website: www.victoryrefrigeration.com

E-Mail: [e-mail] [e-mail] [e-mail]

THANK YOU

Thank you for purchasing a Victory ULTRASPEC
passed our strict Quality Control Inspection and meets the high standards set
by Victory Refrigeration. You have made a quality investment that with proper
maintenance will give you many years of service.

Please read the following installation and maintenance instructions before
installing or using your unit. If you have any questions, please call our T echnical
Service Department at (800) 523- 5008.

IMPORTANT INFORMATION - PLEASE READ

* Please read these instructions carefully before installing or using. If recommended
procedures are not followed, warranty claims may be denied.

™

Series cabinet! This unit has

* Your Warranty Registration information is located on the next page of this manual.
Please complete the card and submit it to Victory Refrigeration within 10 days of
installation. Failure to properly register equipment may limit or void the warranty.

* Victory Refrigeration reserves the right to change specifications and product
design without notice. Such revisions do not entitle the buyer to corresponding
changes, improvements, additions or replacements for previously purchased
equipment.

LIMITED WARRANTY

(Continental USA Only)

The Seller warrants to the original purchaser, equipment manufactured by Seller to be free from defects in material and
workmanship for which it is responsible. The Seller’s obligation under this warranty shall be limited to replacing or
repairing at Seller’s option, without charge, F.O.B. Seller’s factory, any part found to be defective and any labor and
material expense incurred by Seller in repairing or replacing such part, such warranty to be limited to a period of twelve
(12) months from the date of installation, provided, however, installation occurs within three (3) months of date of
purchase and equipment is in normal use and service and is installed in accordance with manufacturer’s
recommendations and provided terms of payment have been fully met. All labor shall be performed during regular
working hours. Overtime premium charges will be at Buyer’s expense.

Proof of purchase must be supplied to Seller to validate warranty. This warranty is valid only if equipment is properly
installed, started-up and inspected by the dealer or authorized Victory Service agent.

Removal or alteration of the serial/data plate from any equipment shall be deemed to release Seller from all warranty
obligations or any other obligations, expressed or implied.

This warranty does not cover Thermostat, Controller, Thermometer or Defrost Timer calibration and/or adjustment,
freight damage, normal maintenance items outlined in Owner’s Manual, adjustment of door mechanisms or replacement
of door gaskets, light bulbs, fuses or batteries. The warranty does not cover installation, start-up, normal maintenance,
food loss, or other consequential damage.

Any repairs or replacement of defective parts shall be performed by Seller’s authorized service personnel. Seller shall
not be responsible for any costs incurred if the work is performed by other than Seller’s authorized service personnel.
Reimbursement claims for part(s) or labor service costs must be made in writing. Model, cabinet serial numbers and
installation location must be shown on the claim. A receipted bill from the servicing agency must accompany the claim,
together with full details of the service problems, diagnosis and work performed. Victory will determine at its sole
discretion whether further documentation on a claim is to be submitted.

Seller shall not be liable for consequential damages of any kind which occur during the course of installation of
equipment, or which result from the use or misuse by Buyer, its employees or others of the equipment supplied
hereunder, and Buyer’s sole and exclusive remedy against Seller for any breach of the foregoing warranty or otherwise
shall be for the repair or replacement of the equipment or parts thereof affected by such breach.

The foregoing warranty shall be valid and binding upon Seller if and only if Buyer loads, operates and maintains the
equipment supplied hereunder in accordance with the instruction manual provided to Buyer. Seller does not guarantee
the process of manufacture by Buyer or the quality of product to be produced by the equipment supplied hereunder
and Seller shall not be liable for any prospective or lost product or profits of Buyer.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES
WHA TSOEVER. SPECIFICALLY THERE ARE NO IMPLIED W ARRANTIES OF MERCHANTABILITY OR OF FITNESS
FOR A PARTICULAR PURPOSE.

The foregoing shall be Seller’s sole and exclusive obligation and Buyer’s sole and exclusive remedy for any action,
whether in breach of contract or negligence. In no event shall Seller be liable for a sum in excess of the purchase price
of the item.

You may fax this completed page to [phone], or copy and mail the form below to Victory.

NOTE: The mail-in or faxed form must be fi lled out and forwarded to Victory by the installer or customer within 10 days after start-up.
Failure to do this may invalidate the warranties. Retain this information for your records.

110 WOODCREST ROAD
CHERRY HILL, NJ 08003-3648
TEL: [phone] : FAX: [phone]

WARRANTIES NOT VALID UNLESS REGISTERED AT

Cabinet Model No.

Cabinet Serial No.

(Data plate information located inside cabinet on the upper left wall)

FACTORY WITHIN 10 DAYS AFTER START-UP DATE.

ORIGINAL DATE OF INSTALLATION
CUSTOMER NAME
STREET

DEALER'S NAME
STREET

PHONE

CITY STATE

ZIP CODE

PHONE

CITY STATE ZIP CODE

Table of Contents

RECEIVING, UNCRATING & LOCATION INSTRUCTIONS

Receiving...................................................................................................................................................................1

Uncrating.................................................................................................................................................................................1

Reach-In, Pass-Thru, Roll-In & Roll-Thru Warmer Location......................................................................................1

REACH-IN / PASS-THRU INSTALLATION INSTRUCTIONS

Reach-In/Pass-Thru Warmer Cabinet Legs or Casters Installation............................................................................1

Reach-In/Pass-Thru Warmer Leveling.......................................................................................................................2

Installing Shelves..........................................................................................................................................................2

ROLL-IN / ROLL-THRU INSTALLATION INSTRUCTIONS

Roll-In/Roll-Thru Warmer Installation.........................................................................................................................2

ALL WARMERS INFORMATION

Cabinet Cleaning........................................................................................................................................................3

Electric Supply..................................................................................................................................................................3

Controller..........................................................................................................................................................................3

Installation Checklist..................................................................................................................................................3

Product Load..............................................................................................................................................................3

™

V-TEMP

LED Indicators & Alarms.............................................................................................................................................4

Alarm Codes, Descriptions & Resolution(s) ..................................................................................................................4

Error Codes.......................................................................................................................................................................4

Keypad & Associated Functions .....................................................................................................................................4

Preheating & Recommended Food Storage Periods.................................................................................................5

ELECTRONIC CONTROLLER

PERIODIC CLEANING

Cabinet Cleaning..............................................................................................................................................................6

Installing Replacement Door Gasket................................................................................................................................6

TROUBLESHOOTING GUIDE FOR COMMON PROBLEMS

Common Problems & Remedies................................................................................................................................7

WIRING DIAGRAMS

1 & 2 Section 208 - 240 Volt W armer..........................................................................................................................8

1 & 2 Section 115 V olt Warmer ................................................................................................. ...................................8