Victory HS-2D-7-EW Installation Manual

REACH-IN, ROLL-IN, ROLL-THRU &

PASS-THRU WARMERS

OWNERS MANUAL

★

(For “Quick Navigation”, Click On Topics or Sections Highlighted In Blue)

DESCRIPTION

INSTALLATION

OPERATION

MAINTENANCE

PARTS LISTS

WIRING DIAGRAMS

Warranty

(Continental USA Only)

The Seller warrants to the original purchaser, equipment manufactured by Seller to be free from defects in material and workmanship for which it is responsible. The Seller's obligation under this warranty shall be limited to replacing or repairing at Seller's option, without charge, F.O.B. Sellers factory, any part found to be defective and any labor and material expense incurred by Seller in repairing or replacing such part, such warranty to be limited to a period of one year from date of purchase or thirteen months from date of shipment from Seller's factory, whichever is earlier, provided terms of payment have been fully met. All labor shall be performed during regular working hours. Overtime premium charges will be at Buyer's expense.

Proof of purchase must be supplied to Seller to validate warranty. This warranty is valid only if equipment is properly installed, started-up and inspected by the dealer or authorized Victory Service agent.

Removal or alteration of the serial/data plate from any equipment shall be deemed to release Seller from all warranty obligations or any other obligations, expressed or implied.

This warranty does not cover Thermostat or Defrost Timer calibration and/or adjustment, freight damage, normal maintenance items outlined in Owner's Manual, adjustment of door mechanisms or replacement of light bulbs, fuses or batteries.

Any repairs or replacement of defective parts shall be performed by Seller's authorized service personnel. Seller shall not be responsible for any costs incurred if the work is performed by other than Seller's authorized service personnel. Reimbursement claims for part(s) or labor service costs must be made in writing. Model, cabinet serial numbers and installation location must be shown on the claim. A receipted bill from the servicing agency must accompany the claim, together with full details of the service problems, diagnosis and work performed. Victory reserves sole discretion whether further documentation on a claim is to be submitted.

Seller shall not be liable for consequential damages of any kind which occur during the course of installation of equipment, or which result from the use or misuse by Buyer, its employees or others of the equipment supplied hereunder, and Buyer's sole and exclusive remedy against Seller for any breach of the foregoing warranty or otherwise shall be for the repair or replacement of the equipment or parts thereof affected by such breach.

The foregoing warranty shall be valid and binding upon Seller if and only if Buyer loads, operates and maintains the equipment supplied hereunder in accordance with the instruction manual provided to Buyer. Seller does not guarantee the process of manufacture by Buyer or the quality of product to be produced by the equipment supplied hereunder and Seller shall not be liable for any prospective or lost product or profits of Buyer.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER. SPECIFICALLY THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE.

The foregoing shall be Seller's sole and exclusive obligation and Buyer's sole and exclusive remedy for any action, whether in breach of contract or negligence. In no event shall Seller be liable for a sum in excess of the purchase price of the item.

ORIGINAL DATE OF INSTALLATION __________________________________________________________________

INSTALLATION COMPANY NAME ____________________________________________________________________

STREET_______________________________ CITY_____________________ STATE______ ZIP CODE___________

DISTRIBUTOR’S NAME_____________________________________________________________________________

STREET_______________________________ CITY_____________________ STATE______ ZIP CODE___________

You may register online at www.victory-refrig.com, fax this completed page to (856) 428-7299, or copy and mail form below to Victory.

*NOTE: The following mail-in form or online registration must be filled out and forwarded to Victory by the installer or customer within 10 days

after start-up. Failure to do this will invalidate the warranties. Retain this information for your records.

110 WOODCREST ROAD CHERRY HILL, NJ 08003-3648

TEL: (856) 428-4200

● FAX: (856) 428-7299

Cabinet Model No.______________________

Cabinet Serial No._________________

(Data plate information located inside cooler on the upper left wall)

WARRANTIES NOT VALID UNLESS REGISTERED AT FACTORY WITHIN 10 DAYS AFTER START-UP DATE.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

Machine Serial Number_______________________________ Installation Date_____________________________________

Victory Refrigeration Service Hotline (800) 523-5008

NOTICE

Victory (Manufacturer) reserves

the right to change

specifications at any time.

IMPORTANT

Warranty Registration Card Enclosed.

Failure to Properly Register

Equipment Can Void Warranty !!!!

NOTICE

Please Read The Entire Manual

Carefully Before Installation. If Certain Recommended Procedures Are Not Followed, Warranty Claims Will Be Denied !!!!

Table of Contents

Page

SECTION 1 - DESCRIPTION .................................................................................... 1

A. Component Function ................................................................................. 1

B. Specifications & Dimensions ..................................................................... 2-7

SECTION 2 - INSTALLATION .................................................................................. 8

A. Receiving Shipment .................................................................................. 8

B. Uncrating Procedure ................................................................................. 8

C. Reducing Depth for Narrow Facility Doorway .......................................... 8-9

D. Locating Your New Warmer ..................................................................... 9

E. Installing Legs or Casters ......................................................................... 9-10

F. Leveling .................................................................................................. 10

G. Initial Cabinet Set-Up .............................................................................. 10-11

H. Electrical Supply ....................................................................................... 11

I. Roll-In Unit Grouting and Sealing ............................................................. 12

J. Installation Checklist ................................................................................ 12

K. Location of Serial Number / Data Plate .................................................... 12

L. Warranty Cards ......................................................................................... 13

SECTION 3 - OPERATION ..................................................................................... 14

A. Electrical Control ..................................................................................... 14

B. Preheating .............................................................................................. 14

C. Recommended Food Storage Periods ................................................... 15

D. Dial Thermometer Calibration ................................................................. 16

E. Setting and Calibrating Digital Display Thermometer .............................. 17

F. Door Adjustment Instructions .................................................................. 18

G. Special Feature Shims for Hinged Door Adjustments ............................ 19

SECTION 4 - MAINTENANCE .............................................................................. 20

A. Care of Equipment ................................................................................. 20

B. Additional Guidelines Regarding Maintenance ....................................... 20

SECTION 5 - PARTS LIST ........................................................................................ 21-23

SECTION 6 - WIRING DIAGRAM ............................................................................... 24-26

SECTION 1 DESCRIPTION

A. Component Function

1. Doors. Each door has a cylinder lock, recessed handle and self-adjusting magnetic gasket. a. Door Size. The doors are full length and half length.

*Note: There are only full length doors available for Roll-In and Roll-Thru cabinets. b. Door Type. The doors are stainless steel. c. Door Hinges. Cam-lift hinges give the doors their self-closing features. d. Door Interior Liner is constructed of heavy gauge stainless steel.

2. Heating System. Strip type 750 watt heating elements, operating on 208-240/60/1, having a total of 1500

watts per compartment, are positioned in the cabinet to ensure uniform temperature distribution. Manually controlled humidity vents are provided in the top of the cabinet.

3. Shelves and Pans.

a. Wire shelves. Heavy-duty wire shelves are adjustable in 1” increments. Shelf clips to support the shelves

are inserted into pilasters on the walls.

b. Pan slides. A wide door opening allows the use of a variety of optional pan slide types for 12” x 20”, 18”

x 26” and 14” x 18” pans and/or trays.

●●

Stainless Steel Adjustable Type Pan Slides as shown in Figure 1-2 are adjustable in increments.

●●

Steel Rod Type Pan Slide Racks, as shown in Figure 1-2, are bottom supported with 2” centers, or lip supported with 1-1/2” centers.

4. Cabinet. The cabinet ends and interior are made of brushed aluminum. Fronts are made of stainless steel. Foamed-in-place polyurethane insulation through the cabinet and doors ensures the ultimate in energy efficiency.

5. Dial Thermometer. The dial thermometer is standard and is calibrated at the factory.

6. Thermometer Sensing Bulb. The temperature sensing bulb is located in the cabinet in the top right hand

corner.

7. Thermostat Control Bulb (Not Shown). The thermal control is accurately calibrated from 70°F to 180°F

SECTION 1-DESCRIPTION SECTION 1-DESCRIPTION

B. Specifications:

Reach-In & Pass-Thru Warmer Specifications

*Note: Approx. Pass- Thru weights, add 15 %

SECTION 1-DESCRIPTION

ONE SECTION TWO SECTION

CHARACTERISTICS Reach-In Pass-Thru Reach-In Pass-Thru

Width,Overall 26-1/2” 26-1/2” 52-1/8” 52-1/8” Depth,Overall(incl. handles) 36-1/8” 39-7/8” 36-1/8” 39-7/8”

Height,Overall(incl.adj. legs) 84 ” 84” 84” 8 4 ”

Depth, Door(s) Open 90

°°

58-1/2” 84-5/8” 58-1/2” 84-5/8”

Clear Door Width 21-1/8” 21-1/8” 21-1/8” 21-1/8”

Clear Full Door Height 55-1/4” 55-1/4” 55-1/4” 55-1/4”

Clear Half Door Height 25-3/8” 25-3/8” 25-3/8” 25-3/8”

Capacity Net (cu. ft.) 21.5 23.7 46.5 48.0

Number of Full Door(s) 1 2 2 4

Number of Half Door(s) 2 4 4 8

Number of Shelves 3 3 6 6

Shelf Area (sq. feet) 17.1 17.1 36.0 36.0

Volts, Cycles, Phase 208-230/60/1 208- 230/60/1

Feed Wires 2 2 2 2

Max. Fuse Size T.D. 15 Amps 15 Amps 20 Amps 20 Amps Heater Watts

per Section( @ 230V ) Total Wattage

(Heaters & Fan @ 230V ) T otal Amperes 6.7 6.7 13.0 13.0

CRATED DIM. & WTS. Height 87” 87” 87” 87”

Width 36-1/2” 36-1/2” 63-5/8” 63-5/8”

Depth 44-3/4” 44-3/4” 44-3/4” 44-3/4”

Cubic Feet 82.2 82.2 143.3 143.3

Stainless Steel 390 lbs 390 lbs 640 lbs 640 lbs

Stainless Steel /Aluminum 370 lbs 370 lbs 600 lbs 600 lbs Aluminum 350 lbs 350 lbs 580 lbs 580 lbs

1440

1550

3000

1440 1440 1440

Reach-In & Pass-Thru Dimension Drawings:

We reserve the right to change specifications and product design without notice.

Such revisions do not entitle the buyer to correspond changes, improvements

additions or replacements for previously purchased equipment.

SECTION 1-DESCRIPTION

Specifications:

Extra Wide Warmer Specifications

*Note: Approx. Pass- Thru weights, add 15 %

SECTION 1-DESCRIPTION

ONE SECTION TWO SECTION

CHARACTERISTICS Reach-In Pass-Thru Reach-In Pass-Thru

Width,Overall 31-1/4” 31-1/4” 58-3/8” 58-3/8” Depth,Overall(incl. handles) 36-1/8” 39-7/8” 36-1/8” 39-7/8”

Height,Overall(incl.adj. legs) 84 ” 84” 84” 84”

Depth, Door(s) Open 90

°°

60” 87-5/8” 60” 87-5/8”

Clear Door Width 22-1/2” 22-1/2” 22-1/2” 22-1/2”

Clear Full Door Height 55-1/4” 55-1/4” 55-1/4” 55-1/4”

Clear Half Door Height 25-3/8” 25-3/8” 25-3/8” 25-3/8”

Capacity Net (cu. ft.) 24.4 26.2 52.0 55.6

Number of Full Door(s) 1 2 2 4

Number of Half Door(s) 2 4 4 8

Number of Shelves 3 3 6 6

Shelf Area (sq. feet) 19.1 19.1 38.2 38.2

Volts, Cycles, Phase 208 -230/60/1 208- 230/60/1

Feed Wires 2 2 2 2 Max. Fuse Size T.D. 15 Amps 15 Amps 20 Amps 20 Amps

Heater Watts per Section( @ 230V )

Total Wattage (Heaters & Fan @ 230V )

T otal Amperes 6.7 6.7 13.0 13.0 CRATED DIM. & WTS.

Height 87” 87” 87” 87”

Width 36-1/2” 36-1/2” 63-5/8” 63-5/8”

Depth 44-3/4” 44-3/4” 44-3/4” 44-3/4”

Cubic Feet 82.2 82.2 143.3 143.3

Stainless Steel 435 lbs 435 lbs 700 lbs 700 lbs

Stainless Steel / Aluminum 415 lbs 415 lbs 655 lbs 655 lbs Aluminum 395 lbs 395 lbs 635 lbs 635 lbs

1440

1550

3000

1440 1440 1440

Extra Wide Reach-In & Pass-Thru Dimension Drawings:

We reserve the right to change specifications and product design without notice.

Such revisions do not entitle the buyer to correspond changes, improvements

additions or replacements for previously purchased equipment.

SECTION 1-DESCRIPTION

Specifications:

Roll-In Warmer Specifications

*Note: Approx. Pass- Thru weights, add 15 %

SECTION 1-DESCRIPTION

ONE SECTION TWO SECTION

CHARACTERISTICS Roll-In Roll-Thru Roll-In Roll-Thru

Width,Overall 36-1/2” 36-1/2” 68-7/8” 68-7/8” Depth,Overall(incl. handles) 36-1/8” 39-7/8” 36-1/8” 39-7/8”

Height,Overall(incl.adj. legs) 84 ” 84” 84” 84”

Depth, Door(s) Open 90

°°

65-1/4” 98-1/8” 65-1/4” 98-1/8”

Depth, Case Over Ramp 35-7/16 38-1/2” 35-7/16” 38-1/2”

Clear Door Width 27-3/4” 27-3/4” 27-3/4” 27-3/4”

Clear Full Door Height 65-1/4” 65-1/4” 65-1/4” 65-1/4”

Capacity Net (cu. ft.) 33.6 36.2 67.2 72.4

Number of Full Door(s) 1 2 2 4

Volts, Cycles, Phase 208-230/60/1 208 - 230/60/1

Max. Fuse Size T.D. 15 Amps 15 Amps 20 Amps 20 Amps

Feed Wires 2 2 2 2 Heater Watts

per Section( @ 230V ) Total Wattage

(Heaters & Fan @ 230V ) T otal Amperes 6.7 6.7 13.0 13.0

CRATED DIM. & WTS. Height 87” 87” 87” 87”

Width 41-3/4” 41-3/4” 74-5/8” 74-5/8” Depth 44-3/4” 44-3/4” 44-3/4” 44-3/4”

Cubic Feet 94.1 94.1 168.1 168.1

Stainless Steel 460 lbs 460 lbs 870 lbs 870 lbs Stainless Steel / Aluminum 440 lbs 440 lbs 810 lbs 810 lbs Aluminum 400 lbs 400 lbs 770 lbs 770 lbs

1440

1550

3000

1440 1440 1440

+ 21 hidden pages