Victory GRS-3-S7 User Manual
110 Woodcrest Road, Cherry Hill, NJ 08003-3648
856.428.4200 • 800.523.5008 • Fax: 856.428.7299
www.victoryrefrigeration.com • email: sales@victoryrefrigeration.com
PROJECT:
LOCATION:
ITEM #:
QUANTITY:
TM
GRIDDLE STAND REFRIGERATORS
STANDARD FEATURES
• Stainless Steel Front, Top, Sides and Interior
• Self-Contained Refrigeration System
• Environmentally Safe R-134a Refrigerant
• Dial Thermometer
• Plasticized Evaporator Fin Coils
• Electric Condensate Evaporator
• Foamed-in-Place Polyurethane Insulation
• Drawers Hold Two (2) 12” x 20” x 4” Pans (Not Included)
• Drawers are Self-Closing with a Stay Open Feature
• 14 Gauge Stainless Steel Drawer Slide
• Ergonomically Correct Handles, Guaranteed for Life
• 6” High, Adjustable Stainless Steel Legs
• Stainless Steel Front Louvered Grille
• One Piece, Snap-In Magnetic Gasket(s)
• Anti-Condensate Perimeter Heaters
• High Impact, Non-Conducting Thermal Breaker Cap
• Cord and Plug (see electrical data for details)
OPTIONS AND ACCESSORIES
• Remote Models (Two and Three Sections Only)
• Stainless Steel Case Back
• Stainless Steel Top with Drip Guard (Marine) Edge
• 6” Overall Height Casters
• Door in Lieu of 2 Drawers
• Optional Voltages
• Two (2) Year Service Warranty
GRS-2-S1
NOTE: Not all marks refer to all models
3 Year Parts and Labor Warranty • 5 Year Compressor Warranty
Victory Refrigeration specification sheets are available APPROVALS:
online at www.victoryrefrigeration.com
S
SERIES
Stainless Steel
Exterior and Interior
MODELS
GRS-1-S1
GRS-2-S1
GRS-3-S1
GRIDDLE STAND REFRIGERATORS
We reserve the right to change specifications and product design without notice. Such revisions do not entitle the
buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Dimensional tolerances +/-
CABINET CONSTRUCTION
CHARACTERISTICS
1 SECTION
The cabinet front, doors, sides, top and interior are constructed of heavy gauge,
polished stainless steel to maintain an attractive appearance after years of heavy use.
Foamed-in place polyurethane insulation throughout the cabinet and drawers ensures
the ultimate in energy efficiency. The front grille is removeable to provide easy access to
the condenser and facilitate cleaning.
DRAWER CONSTRUCTION
The drawers are heavy gauge, polished stainless steel with 14 gauge stainless steel
slides. Each drawer is self-closing with a stay open feature. The horizontal handles
are guaranteed for life. Each drawer has a snap-in place magnetic gasket for a positive
seal. Perimeter heater wires around the drawer openings help prevent condensation
from forming on the front of the cabinet. Each heater wire is concealed and protected
by a high impact, non-conducting breaker cap.
REFRIGERATION SYSTEM
A high efficiency, air-cooled, self-contained refrigeration system is mounted on the side
of the cabinet and located behind the easily removable front louvered grille. Envi-
ronmentally friendly R-134a refrigerant is efficiently metered by a capillary system
providing a constant, safe operating temperature and quick “recovery” under the most
demanding conditions. The hermetically sealed system is designed to operate at 38°F.
The fans and cooling coil, which is plasticized to resist food acids, move cold air from
side to side, top to bottom to keep food product at a safe storage temperature. All
condensate water is disposed of automatically by the energy efficient, electric
condensate evaporator.
INTERIOR STORAGE ARRANGEMENTS
Each drawer accomodates two (2) 12” x 20” x 4” pans (not included).
DIMENSIONAL DATA
Capacity Net (cubic ft.)
Width*, Overall (in.)
* Remote Width, Overall (in.)
Depth, Overall (inc. handles)
Height Overall (inc. 6” legs)
No. of Drawers
No. 12” x 20” Pans (not included)
MAXIMUM LOAD
On Top of Griddle Stands (lbs)
6.0
50
NA
34
25 1⁄2
2
4
450
1
⁄8
5
⁄8
ELECTRICAL DATA
Cabinet Voltage
Feed Wires
Condensing Unit Voltage
NEMA Plug
Total Amperes
REFRIGERATION DATA
Condensing Unit Size
Refrigerant
115/60/1
2
115/60/1
5-15 P
8
1
⁄4 HP
R-134a
NOTE: Plug style, voltage and full load amps may vary depending on certain
options selected such as special voltages and compressor upgrades.
REMOTE APPLICATIONS: See form V-RRDS1 for remote refrigeration
characteristics by model.
CRATED DIMENSIONS & WTS.
HT. WIDTH DEPTH FT³ LBS
ONE SECTION
TWO SECTION
THREE SECTION
34
34 1⁄4
34 1⁄4
1
56 1⁄4
⁄4
83 1⁄4
111
NOTE: In order to provide peak operating performance the cabinet must
have a 2 inch all around clearance.
1
⁄4”. Metric dimensions (MM)
2 SECTION
12.0
1
77
⁄4
60 1⁄2
34 5⁄8
25 1⁄2
4
8
800
115/60/1
2
115/60/1
5-15P
8.3
1
⁄4 HP
R-134a
3
38
⁄4
38 3⁄4
38 3⁄4
3 SECTION
18.0
105
5
87
⁄8
34 5⁄8
25 1⁄2
6
12
1300
115/60/1
2
115/60/1
5-15P
8.6
1
⁄4 HP
R-134a
43.20
63.94
85.25
330
410
560
Copyright March 2013
Printed in USA
Loading...