Victory ACRS-1D-S7-SST User Manual

110 Woodcrest Road, Cherry Hill, NJ 08003-3648

856.428.4200 • 800.523.5008 • Fax: [phone]
www.victoryrefrigeration.com • email: [e-mail]

PROJECT:

LOCATION:

ITEM #:

QUANTITY:

TM

AIR CURTAIN REFRIGERATORS

STANDARD FEATURES

• Dial Thermometer

• Stainless Steel Interior and Exterior

• Lifetime, Energy Saving Thermal Breaker Caps

• Environmentally Safe R-134a Refrigerant

• Plasticized Evaporator Fin Coils

• Non-Electric Condensate Evaporator

• Foamed-in-Place Polyurethane Insulation

• Heavy Duty Cylinder Locks

• Ergonomically Correct Door Handles, Guaranteed for Life

• One Piece, Snap-In Magnetic Door Gasket(s)

• Fifteen Pair (15) Adjustable Stainless Steel Pan Slides

• Stainless Steel Hinges

• Full 270° Door Swing

• Flush Recessed Side Hand Grips

• Rear Mounted Push Bar Handle with Rubber Bumpers

• 71/4” Overall Height Heavy Duty Casters with Locks

• Cord and Plug (see electrical data for details)

OPTIONS AND ACCESSORIES

• Change Door Swing

• Optional Voltages

• Two (2) Year Service Warranty

NOTE: Not all marks refer to all models

1 Year Parts and Labor Warranty • 5 Year Compressor Warranty

2 Year V-TEMP™ Control Warranty

Victory Refrigeration specification sheets are available APPROVALS:
online at www.victoryrefrigeration.com

S

SERIES

Stainless Steel

Exterior and Interior

ACRS-1D-S1-STS

MODELS

LONG-DOOR

ACRS-1D-S1-STS

GLASS-DOOR

ACRS-1D-S1-STS-GD

AIR CURTAIN REFRIGERATORS

We reserve the right to change specifications and product design without notice. Such revisions do not entitle the
buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Dimensional tolerances +/- 1⁄4”. Metric dimensions (MM)

CABINET CONSTRUCTION

The cabinet front and doors are constructed of heavy gauge, polished stainless
steel to maintain an attractive appearance after years of heavy use. Polyurethane
foam insulation throughout ensures the ultimate in energy efficiency. The cabinet interior
has strategically designed air ducts on the both sides of the cabinet for ideal air circula­tion and food product temperature maintenance. When the door is opened, a curtain of
cold air blows across the front of the cabinet opening. This keeps the warm air out and
cold air in, assuring safe storage during peak service hours. This model is ideal for use

in hospitals, catering or any food service operation that is assembling trays for meal
service.

DOOR CONSTRUCTION

The doors are heavy gauge, polished stainless steel with a stainless steel interior liner.
Each door is provided with a cylinder lock and ergonomically correct vertical handle.
The door hinges are stainless steel and allow the door to open 270°. A locking device
holds the door open during tray make-up periods.

REFRIGERATION SYSTEM

The motor compressor is mounted at the base of the unit in order to provide a lower
center of gravity and easy manuverability. The cooling coil is located in the cabinet
interior at the top of the compartment. Environmentally friendly R-134a refrigerant is ef­ficiently metered by a capillary system providing a constant, safe operating temperature
and quick “recovery” under the most demanding conditions. The hermetically sealed­systems are designed to operate at 38°F. Each cooling coil has plasticized fins to resist
food acids. All condensate water is disposed of automatically by the energy efficient,

non-electric condensate evaporator.

INTERIOR STORAGE ARRANGEMENTS

Each cabinet section is provided with fifteen (15) pair of adjustable, stainless steel pan
slides for 18” x 26” pans. Trays are located on 2 1⁄2 inch centers.

CHARACTERISTICS 1 SECTION

DIMENSIONAL DATA

Capacity Net (cubic ft.) 32.5
Width, Overall (in.) 27 1⁄8
Depth, Overall (inc. handles) 38
Depth, Door(s) Open 90° 62 7⁄8
Clear Door Width (in.) 22 1⁄2
Clear Full-Door Height (in.) 41
Height Overall (inc. 6" legs) 76 1⁄2
No. Full/Half Doors 1F
Pairs of Pan Slides 15

ELECTRICAL DATA

Cabinet Voltage 115/60/1
Feed Wires 2
Condensing Unit Voltage 115/60/1
NEMA Plug 5-20P
Total Amperes 15.7

REFRIGERATION DATA

Condensing Unit Size

1

⁄2 HP

Refrigerant R-134a

NOTE: Plug style, voltage and full load amps may vary depending on
options selected such as optional voltages and compressor upgrades.

REMOTE APPLICATIONS

See form V-RRDS1 for details of remote refrigeration characteristics by

model.

CRATED DIMENSIONS & WTS. HT. WIDTH DEPTH CU. FT. LBS

ONE SECTION 78 36 43 69.88 465

NOTE: In order to provide peak operating performance the cabinet
must have a 2 inch all around clearance and 12 inches above the top
of the condensing unit. This ensures an adequate air supply and space
for routine maintenance and/or service if required.

Copyright February 2012

Printed in USA